Re: [Linux-gpib-general] Problems compiling 3.1.2 on a Red Hat 7.2 system

[Marc L. <Mar...@un...>]

On 05 Apr 2002 16:59:08 +0200,=20
Marc Lefranc <Mar...@un...> wrote :
> Looking in driver/ines/ines_init.c, I see that the init code looks for
> a board that has vendor_id and device_id INES_VENDOR_ID and
> INES_DEV_ID, but my Ines board does not advertise itself as such :
>=20
> /sbin/lspci -vv :
>=20
> 00:0b.0 PIC: Applied Micro Circuits Corporation: Unknown device 8507 (p=
rog-if 00 [8259])
[...]
> I will try to replace the INES_VENDOR_ID and INES_DEV_ID with the
> values obtained with lspci and see what happens.

Well, this didn't help : I still get the same error message...

I am quite surprised that pci_find_device does not find the vendor and
device id listed by lspci ??

Marc

If that helps, here is the output ls lspci -vvx :

00:0b.0 PIC: Applied Micro Circuits Corporation: Unknown device 8507 (pro=
g-if 00 [8259])
	Subsystem: Applied Micro Circuits Corporation: Unknown device 1072
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step=
ping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbo=
rt- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at e400 [size=3D128]
	Region 1: I/O ports at e800 [size=3D32]
00: e8 10 07 85 03 00 80 02 00 00 00 08 00 00 00 00
10: 01 e4 00 00 01 e8 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 e8 10 72 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00



--=20
_____________________________________________________________
 Marc Lefranc, Charg=E9 de Recherche au CNRS
 Laboratoire de Physique des Lasers, Atomes, Mol=E9cules
 Bat P5, UFR de Physique
 Universit=E9 des Sciences et Technologies de Lille
 F-59655 Villeneuve d'Ascq CEDEX (FRANCE)
 e-mail: Mar...@un...
 Tel : +33 (0)3 20 33 64 50 ;  FAX : +33 (0)3 20 33 70 20
_____________________________________________________________