Re: [Linux-gpib-general] ibBoardOpen errno=2

[Michael T. <Mic...@s3...>]

Hi,
	I have attached my gpib.conf. I haven't got the board working under=20
windows yet either so I may have it incorrectly configured. The output=20
from dmesg is
<snip>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(08)
parport0: assign_addrs: aa5500ff(08)
parport0: cpp_daisy: aa5500ff(08)
parport0: assign_addrs: aa5500ff(08)
PCI: Found IRQ 11 for device 00:11.0
PCI: Sharing IRQ 11 with 00:07.2
PCI: Sharing IRQ 11 with 01:00.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xdc00. Vers LK1.1.16
ide-floppy driver 0.97
hdc: ATAPI 32X CD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Linux-GPIB Driver -- Kernel Release 2.4.7-10custom
gpib: registered pcII interface
gpib: registered pcIIa interface

frank mori hess wrote:

> When it asks for a primary address, it wants the address of the device =
you
> want to talk to as opposed to the address you gave to your interface bo=
ard
> (which I am assuming is 0).  Could you send me your /etc/gpib.conf file
> and the output of your kernel log after your try to run ibtest (use the
> 'dmesg' command).
>=20
> Frank
>=20
> On Wed, 13 Mar 2002, Michael Thompson wrote:
>=20
>=20
>>Hi,
>>
>>	I have compiled the latest cource from CVS and successfully loaded the
>>module. I have edited /etc/gpib.conf but when I run ibtest I get this e=
rror
>>
>>enter primary address for device [0-30]: 0
>>trying to open pad =3D 0 on /dev/gpib0 ...
>>
>>  ibBoardOpen    :[Wed Mar 13 13:49:12 2002](-)<  ERR>  EDVR <OS Error>
>>                -- errno=3D2 (No such file or directory)
>>
>>  ibBdChrConfig  :[Wed Mar 13 13:49:12 2002](r=C9@5@=E4=B1@Pb@)<  ERR> =
 EDVR
>><OS Error>
>>                -- errno=3D2 (No such file or directory)
>>failed to get descriptor
>>
>>
>>How do I track doen this error?
>>
>>I am running Redhat 7.1 Kernel version 2.4.7-10 and using a National
>>Intruments PCII/PCIIa GPIB card.
>>
>>Thanks, Michael
>>
>>
>>_______________________________________________
>>Linux-gpib-general mailing list
>>Lin...@li...
>>https://lists.sourceforge.net/lists/listinfo/linux-gpib-general
>>
>>
>=20
>=20
> _______________________________________________
> Linux-gpib-general mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linux-gpib-general
>=20



--=20
Michael Thompson       	+353 1 291 1710
RF IC Design Engineer  	+353 1 676 3199
Silicon & Software Systems