Re: [Linux-fbdev-users] (2.6.9-rc4|2.6.9|2.6.10-rc1) black cursor on console [ppc platform]

[Elimar R. <rie...@lx...>]

On Tue, 26 Oct 2004 the mental interface of
Antonino A. Daplas told:

> On Tuesday 26 October 2004 02:49, Elimar Riesebieter wrote:
> > On Mon, 25 Oct 2004 the mental interface of
> >
> > Antonino A. Daplas told:
> > > On Sunday 24 October 2004 17:25, Elimar Riesebieter wrote:
> > > > Hi all,
> > > >
> > > > I am running 2.6.10-rc1 on my Apple AlBG4. gpm is started at bootti=
me.
> > > > The mousecursor is black colored on vt's and can be used as a brush=
 to
> > > > darken the screen.
> > > >
> > > > $ /usr/sbin/fbset
> > > > mode "1280x854-60"
> > > >     # D: 79.815 MHz, H: 51.963 kHz, V: 60.003 Hz
> > > >     geometry 1280 854 1280 854 8
> > > >     timings 12529 128 16 8 1 112 3
> > > >     rgba 8/0,8/0,8/0,0/0
> > > > endmode
> > > >
> > > > $ cat /proc/fb
> > > > 0 ATI Radeon NP
> > > >
> > > > The bootlogo isn`t shown.
> > > >
> > > > The same kernel on a i386 box with radeonfb (Radeon 9000) works
> > > > fine.
> > > >
> > > > Any hints to get back a white mousecursor and a shown bootlogo as in
> > > > 2.6.8?
> > >
> > > See my other mail for the mousecursor.
> >
>=20
> Can you try booting with video=3Dradeonfb:noaccel?
No changes :(

$ dmesg | grep radeon
Kernel command line: root=3D/dev/hda5 ro video=3Dradeonfb:noaccel=20
radeonfb: Invalid ROM signature 303 should be 0xaa55
radeonfb: Retreived PLL infos from Open Firmware
radeonfb: Reference=3D27.00 MHz (RefDiv=3D12) Memory=3D200.00 Mhz, System=
=3D300.00 MHz
radeonfb: PLL min 12000 max 35000
radeonfb: Monitor 1 type LCD found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb: Using Firmware dividers 0x0002008e from PPLL 0
radeonfb: Power Management enabled for Mobility chipsets
radeonfb: ATI Radeon NP  SDR SGRAM 64 MB

Elimar


--=20
  Planung:
  Ersatz des Zufalls durch den Irrtum.
                                -unknown-