Menu
▾
▴
[Linux-fbdev-devel] [REVIEW PATCH 5/9] DSS: DSI support for OMAP2/3 DSS
|
From: Tomi V. <tom...@no...> - 2008-11-04 16:10:40
|
Signed-off-by: Tomi Valkeinen <tom...@no...> --- arch/arm/plat-omap/dss/dsi.c | 3027 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 3027 insertions(+), 0 deletions(-) create mode 100644 arch/arm/plat-omap/dss/dsi.c diff --git a/arch/arm/plat-omap/dss/dsi.c b/arch/arm/plat-omap/dss/dsi.c new file mode 100644 index 0000000..47e5628 --- /dev/null +++ b/arch/arm/plat-omap/dss/dsi.c @@ -0,0 +1,3027 @@ +/* + * linux/arch/arm/plat-omap/dss/dsi.c + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tom...@no...> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "DSI" + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/mutex.h> + +#include <mach/board.h> +#include <mach/display.h> + +#include "dss.h" + +/*#define VERBOSE*/ +/*#define VERBOSE_IRQ*/ +/*#define MEASURE_PERF*/ + +#define DSI_BASE 0x4804FC00 + +struct dsi_reg { u16 idx; }; + +#define DSI_REG(idx) ((const struct dsi_reg) { idx }) + +/* DSI Protocol Engine */ + +#define DSI_REVISION DSI_REG(0x0000) +#define DSI_SYSCONFIG DSI_REG(0x0010) +#define DSI_SYSSTATUS DSI_REG(0x0014) +#define DSI_IRQSTATUS DSI_REG(0x0018) +#define DSI_IRQENABLE DSI_REG(0x001C) +#define DSI_CTRL DSI_REG(0x0040) +#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) +#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) +#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) +#define DSI_CLK_CTRL DSI_REG(0x0054) +#define DSI_TIMING1 DSI_REG(0x0058) +#define DSI_TIMING2 DSI_REG(0x005C) +#define DSI_VM_TIMING1 DSI_REG(0x0060) +#define DSI_VM_TIMING2 DSI_REG(0x0064) +#define DSI_VM_TIMING3 DSI_REG(0x0068) +#define DSI_CLK_TIMING DSI_REG(0x006C) +#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) +#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) +#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) +#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) +#define DSI_VM_TIMING4 DSI_REG(0x0080) +#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) +#define DSI_VM_TIMING5 DSI_REG(0x0088) +#define DSI_VM_TIMING6 DSI_REG(0x008C) +#define DSI_VM_TIMING7 DSI_REG(0x0090) +#define DSI_STOPCLK_TIMING DSI_REG(0x0094) +#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) +#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) +#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) +#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) +#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) +#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) +#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) + +/* DSIPHY_SCP */ + +#define DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) +#define DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) +#define DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) +#define DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) + +/* DSI_PLL_CTRL_SCP */ + +#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) +#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) +#define DSI_PLL_GO DSI_REG(0x300 + 0x0008) +#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) +#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) + +#define REG_GET(idx, start, end) \ + FLD_GET(dsi_read_reg(idx), start, end) + +#define REG_FLD_MOD(idx, val, start, end) \ + dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) + +/* Global interrupts */ +#define DSI_IRQ_VC0 (1 << 0) +#define DSI_IRQ_VC1 (1 << 1) +#define DSI_IRQ_VC2 (1 << 2) +#define DSI_IRQ_VC3 (1 << 3) +#define DSI_IRQ_WAKEUP (1 << 4) +#define DSI_IRQ_RESYNC (1 << 5) +#define DSI_IRQ_PLL_LOCK (1 << 7) +#define DSI_IRQ_PLL_UNLOCK (1 << 8) +#define DSI_IRQ_PLL_RECALL (1 << 9) +#define DSI_IRQ_COMPLEXIO_ERR (1 << 10) +#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) +#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) +#define DSI_IRQ_TE_TRIGGER (1 << 16) +#define DSI_IRQ_ACK_TRIGGER (1 << 17) +#define DSI_IRQ_SYNC_LOST (1 << 18) +#define DSI_IRQ_LDO_POWER_GOOD (1 << 19) +#define DSI_IRQ_TA_TIMEOUT (1 << 20) +#define DSI_IRQ_ERROR_MASK \ + (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ + DSI_IRQ_TA_TIMEOUT) +#define DSI_IRQ_CHANNEL_MASK 0xf + +/* Virtual channel interrupts */ +#define DSI_VC_IRQ_CS (1 << 0) +#define DSI_VC_IRQ_ECC_CORR (1 << 1) +#define DSI_VC_IRQ_PACKET_SENT (1 << 2) +#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) +#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) +#define DSI_VC_IRQ_BTA (1 << 5) +#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) +#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) +#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) +#define DSI_VC_IRQ_ERROR_MASK \ + (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ + DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ + DSI_VC_IRQ_FIFO_TX_UDF) + +/* ComplexIO interrupts */ +#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) +#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) +#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) +#define DSI_CIO_IRQ_ERRESC1 (1 << 5) +#define DSI_CIO_IRQ_ERRESC2 (1 << 6) +#define DSI_CIO_IRQ_ERRESC3 (1 << 7) +#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) +#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) +#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) +#define DSI_CIO_IRQ_STATEULPS1 (1 << 15) +#define DSI_CIO_IRQ_STATEULPS2 (1 << 16) +#define DSI_CIO_IRQ_STATEULPS3 (1 << 17) +#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) +#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) +#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) +#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) +#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) +#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) +#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) +#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) + +#define DSI_DT_DCS_SHORT_WRITE_0 0x05 +#define DSI_DT_DCS_SHORT_WRITE_1 0x15 +#define DSI_DT_DCS_READ 0x06 +#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 +#define DSI_DT_NULL_PACKET 0x09 +#define DSI_DT_DCS_LONG_WRITE 0x39 + +#define DSI_DT_RX_ACK_WITH_ERR 0x02 +#define DSI_DT_RX_DCS_LONG_READ 0x1c +#define DSI_DT_RX_SHORT_READ_1 0x21 +#define DSI_DT_RX_SHORT_READ_2 0x22 + +#define FINT_MAX 2100000 +#define FINT_MIN 750000 +#define REGN_MAX (1 << 7) +#define REGM_MAX ((1 << 11) - 1) +#define REGM3_MAX (1 << 4) +#define REGM4_MAX (1 << 4) + +enum fifo_size { + DSI_FIFO_SIZE_0 = 0, + DSI_FIFO_SIZE_32 = 1, + DSI_FIFO_SIZE_64 = 2, + DSI_FIFO_SIZE_96 = 3, + DSI_FIFO_SIZE_128 = 4, +}; + +static struct +{ + void __iomem *base; + + struct clk *dss_ick; + struct clk *dss1_fck; + struct clk *dss2_fck; + + unsigned long dsi1_pll_fclk; /* Hz */ + unsigned long dsi2_pll_fclk; /* Hz */ + unsigned long dsiphy; /* Hz */ + unsigned long ddr_clk; /* Hz */ + + struct { + enum fifo_size fifo_size; + int dest_per; /* destination peripheral 0-3 */ + } vc[4]; + + struct mutex lock; + + struct completion bta_completion; + + spinlock_t update_lock; + int update_ongoing; + int update_syncers; + struct completion update_completion; + struct work_struct framedone_work; + + enum omap_dss_update_mode update_mode; + int use_te; + int framedone_scheduled; /* helps to catch strange framedone bugs */ + + struct { + struct omap_display *display; + int x, y, w, h; + int bytespp; + } update_region; + +#ifdef MEASURE_PERF + ktime_t measure_time; + int measure_frames; +#endif +} dsi; + + +static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) +{ + __raw_writel(val, dsi.base + idx.idx); +} + +static inline u32 dsi_read_reg(const struct dsi_reg idx) +{ + return __raw_readl(dsi.base + idx.idx); +} + +static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, + int value) +{ + int t = 1000; + + while (REG_GET(idx, bitnum, bitnum) != value) { + if (--t == 0) + return !value; + } + + return value; +} + + +#ifdef MEASURE_PERF +static void start_measuring(void) +{ + dsi.measure_time = ktime_get(); +} + +static void end_measuring(const char *name) +{ + ktime_t t; + u32 total_bytes; + u32 us; + const int numframes = 100; + + if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) + return; + + if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { + dsi.measure_frames++; + if (dsi.measure_frames < numframes) + return; + dsi.measure_frames = 0; + } + + t = ktime_get(); + t = ktime_sub(t, dsi.measure_time); + us = (u32)ktime_to_us(t); + if (us == 0) + us = 1; + + total_bytes = dsi.update_region.w * + dsi.update_region.h * + dsi.update_region.bytespp; + + if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { + DSSINFO("%s update: %d frames in %u us, %u frames/sec\n", + name, numframes, + us, + 1000*1000 / us); + } else { + DSSINFO("%s update in %u us (%u Hz), %u bytes, %u kbytes/sec\n", + name, + us, + 1000*1000 / us, + total_bytes, + total_bytes * 1000 / us); + } +} +#else +#define start_measuring() +#define end_measuring(x) +#endif + + + + +static void print_irq_status(u32 status) +{ +#ifndef VERBOSE_IRQ + if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) + return; +#endif + printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); + +#define PIS(x) \ + if (status & DSI_IRQ_##x) \ + printk(#x " "); +#ifdef VERBOSE_IRQ + PIS(VC0); + PIS(VC1); + PIS(VC2); + PIS(VC3); +#endif + PIS(WAKEUP); + PIS(RESYNC); + PIS(PLL_LOCK); + PIS(PLL_UNLOCK); + PIS(PLL_RECALL); + PIS(COMPLEXIO_ERR); + PIS(HS_TX_TIMEOUT); + PIS(LP_RX_TIMEOUT); + PIS(TE_TRIGGER); + PIS(ACK_TRIGGER); + PIS(SYNC_LOST); + PIS(LDO_POWER_GOOD); + PIS(TA_TIMEOUT); +#undef PIS + + printk("\n"); +} + +static void print_irq_status_vc(int channel, u32 status) +{ +#ifndef VERBOSE_IRQ + if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) + return; +#endif + printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); + +#define PIS(x) \ + if (status & DSI_VC_IRQ_##x) \ + printk(#x " "); + PIS(CS); + PIS(ECC_CORR); +#ifdef VERBOSE_IRQ + PIS(PACKET_SENT); +#endif + PIS(FIFO_TX_OVF); + PIS(FIFO_RX_OVF); + PIS(BTA); + PIS(ECC_NO_CORR); + PIS(FIFO_TX_UDF); + PIS(PP_BUSY_CHANGE); +#undef PIS + printk("\n"); +} + +static void print_irq_status_cio(u32 status) +{ + printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); + +#define PIS(x) \ + if (status & DSI_CIO_IRQ_##x) \ + printk(#x " "); + PIS(ERRSYNCESC1); + PIS(ERRSYNCESC2); + PIS(ERRSYNCESC3); + PIS(ERRESC1); + PIS(ERRESC2); + PIS(ERRESC3); + PIS(ERRCONTROL1); + PIS(ERRCONTROL2); + PIS(ERRCONTROL3); + PIS(STATEULPS1); + PIS(STATEULPS2); + PIS(STATEULPS3); + PIS(ERRCONTENTIONLP0_1); + PIS(ERRCONTENTIONLP1_1); + PIS(ERRCONTENTIONLP0_2); + PIS(ERRCONTENTIONLP1_2); + PIS(ERRCONTENTIONLP0_3); + PIS(ERRCONTENTIONLP1_3); + PIS(ULPSACTIVENOT_ALL0); + PIS(ULPSACTIVENOT_ALL1); +#undef PIS + + printk("\n"); +} + +static int debug_irq; + +/* called from dss */ +void dsi_irq_handler(void) +{ + u32 irqstatus, vcstatus, ciostatus; + int i; + + irqstatus = dsi_read_reg(DSI_IRQSTATUS); + + if (irqstatus & DSI_IRQ_ERROR_MASK) { + DSSERR("DSI error, irqstatus %x\n", irqstatus); + print_irq_status(irqstatus); + } else if (debug_irq) { + print_irq_status(irqstatus); + } + + for (i = 0; i < 4; ++i) { + if ((irqstatus & (1<<i)) == 0) + continue; + + vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i)); + + if (vcstatus & DSI_VC_IRQ_BTA) + complete(&dsi.bta_completion); + + if (vcstatus & DSI_VC_IRQ_ERROR_MASK) { + DSSERR("DSI VC(%d) error, vc irqstatus %x\n", + i, vcstatus); + print_irq_status_vc(i, vcstatus); + } else if (debug_irq) { + print_irq_status_vc(i, vcstatus); + } + + dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus); + } + + if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) { + ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); + + dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus); + + DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); + print_irq_status_cio(ciostatus); + } + + dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); +} + + +static void _dsi_initialize_irq(void) +{ + u32 l; + int i; + + /* disable all interrupts */ + dsi_write_reg(DSI_IRQENABLE, 0); + for (i = 0; i < 4; ++i) + dsi_write_reg(DSI_VC_IRQENABLE(i), 0); + dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0); + + /* clear interrupt status */ + l = dsi_read_reg(DSI_IRQSTATUS); + dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK); + + for (i = 0; i < 4; ++i) { + l = dsi_read_reg(DSI_VC_IRQSTATUS(i)); + dsi_write_reg(DSI_VC_IRQSTATUS(i), l); + } + + l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); + dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l); + + /* enable error irqs */ + l = DSI_IRQ_ERROR_MASK; + dsi_write_reg(DSI_IRQENABLE, l); + + l = DSI_VC_IRQ_ERROR_MASK; + for (i = 0; i < 4; ++i) + dsi_write_reg(DSI_VC_IRQENABLE(i), l); + + /* XXX zonda responds incorrectly, causing control error: + Exit from LP-ESC mode to LP11 uses wrong transition states on the + data lines LP0 and LN0. */ + dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, + -1 & (~DSI_CIO_IRQ_ERRCONTROL2)); +} + +static void dsi_vc_enable_bta_irq(int channel) +{ + u32 l; + + l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); + l |= DSI_VC_IRQ_BTA; + dsi_write_reg(DSI_VC_IRQENABLE(channel), l); +} + +static void dsi_vc_disable_bta_irq(int channel) +{ + u32 l; + + l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); + l &= ~DSI_VC_IRQ_BTA; + dsi_write_reg(DSI_VC_IRQENABLE(channel), l); +} + +/* DSI func clock. this could also be DSI2_PLL_FCLK */ +static inline void enable_clocks(int enable) +{ + if (enable) { + clk_enable(dsi.dss_ick); + clk_enable(dsi.dss1_fck); + } else { + clk_disable(dsi.dss1_fck); + clk_disable(dsi.dss_ick); + } +} + +/* source clock for DSI PLL. this could also be PCLKFREE */ +static inline void dsi_enable_pll_clock(int enable) +{ + if (enable) + clk_enable(dsi.dss2_fck); + else + clk_disable(dsi.dss2_fck); +} + +#if 1 + +#ifdef DEBUG +static void _dsi_print_reset_status(void) +{ + u32 l; + + /* A dummy read using the SCP interface to any DSIPHY register is + * required after DSIPHY reset to complete the reset of the DSI complex + * I/O. */ + l = dsi_read_reg(DSIPHY_CFG5); + + printk(KERN_DEBUG "DSI resets: "); + + l = dsi_read_reg(DSI_PLL_STATUS); + printk("PLL (%d) ", FLD_GET(l, 0, 0)); + + l = dsi_read_reg(DSI_COMPLEXIO_CFG1); + printk("CIO (%d) ", FLD_GET(l, 29, 29)); + + l = dsi_read_reg(DSIPHY_CFG5); + printk("PHY (%x, %d, %d, %d)\n", + FLD_GET(l, 28, 26), + FLD_GET(l, 29, 29), + FLD_GET(l, 30, 30), + FLD_GET(l, 31, 31)); +} +#else +#define _dsi_print_reset_status() +#endif + +static int _dsi_reset(void) +{ + int r = 0; + + /* Soft reset */ + REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1); + + if (wait_for_bit_change(DSI_SYSSTATUS, 0, 1) != 1) { + DSSERR("soft reset failed\n"); + r = -ENODEV; + } + + /* A dummy read using the SCP interface to any DSIPHY register is + * required after DSIPHY reset to complete the reset of the DSI complex + * I/O. */ + dsi_read_reg(DSIPHY_CFG5); + + _dsi_print_reset_status(); + + return r; +} +#endif + +static inline int dsi_if_enable(int enable) +{ + DSSDBG("dsi_if_enable(%d)\n", enable); + + enable = enable ? 1 : 0; + REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */ + + if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) { + DSSERR("Failed to set dsi_if_enable to %d\n", enable); + return -EIO; + } + + return 0; +} + +static unsigned long dsi_fclk_rate(void) +{ + unsigned long r; + + if (dss_get_dsi_clk_source() == 0) { + /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */ + r = clk_get_rate(dsi.dss1_fck); + } else { + /* DSI FCLK source is DSI2_PLL_FCLK */ + r = dsi.dsi2_pll_fclk; + } + + return r; +} + +static int dsi_set_lp_clk_divisor(void) +{ + int n; + unsigned long dsi_fclk; + unsigned long mhz; + + /* LP_CLK_DIVISOR, DSI fclk/n, should be 20MHz - 32kHz */ + + dsi_fclk = dsi_fclk_rate(); + + for (n = 1; n < (1 << 13) - 1; ++n) { + mhz = dsi_fclk / n; + if (mhz <= 20*1000*1000) + break; + } + + if (n == (1 << 13) - 1) { + DSSERR("DSI: Failed to find LP_CLK_DIVISOR\n"); + return -EINVAL; + } + + DSSDBG("LP_CLK_DIV %d, LP_CLK %ld\n", n, mhz); + + REG_FLD_MOD(DSI_CLK_CTRL, n, 12, 0); /* LP_CLK_DIVISOR */ + if (dsi_fclk > 30*1000*1000) + REG_FLD_MOD(DSI_CLK_CTRL, 1, 21, 21); /* LP_RX_SYNCHRO_ENABLE */ + + return 0; +} + + +enum dsi_pll_power_state { + DSI_PLL_POWER_OFF = 0x0, + DSI_PLL_POWER_ON_HSCLK = 0x1, + DSI_PLL_POWER_ON_ALL = 0x2, + DSI_PLL_POWER_ON_DIV = 0x3, +}; + +static int dsi_pll_power(enum dsi_pll_power_state state) +{ + int t = 0; + + REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ + + /* PLL_PWR_STATUS */ + while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { + udelay(1); + if (t++ > 1000) { + DSSERR("DSI: Failed to set DSI PLL power mode to %d\n", + state); + return -ENODEV; + } + } + + return 0; +} + +/* return 1 for exact match */ +static int iterate_dispc_divs(int is_tft, unsigned long pck, + struct dsi_clock_info *cur, struct dsi_clock_info *best) +{ + int pcd_min = is_tft ? 2 : 3; + + for (cur->lck_div = 1; cur->lck_div <= 255; ++cur->lck_div) { + unsigned long lck = cur->dispc_fck / cur->lck_div; + + for (cur->pck_div = pcd_min; cur->pck_div <= 255; + ++cur->pck_div) { + + cur->pck = lck / cur->pck_div; + + if (abs(cur->pck - pck) < abs(best->pck - pck)) { + *best = *cur; + /* + DSSDBG("best match fck %ld, pck %ld, regn %d, " + "regm %d, regm3 %d, ld %d, pd %d\n", + best->dispc_fck, + best->pck, + best->regn, best->regm, + best->regm3, + best->lck_div, best->pck_div); + */ + } + + if (cur->pck == pck) + return 1; + + if (cur->pck < pck) + break; + } + + if (lck / pcd_min < cur->pck) + break; + } + + return 0; +} + +int dsi_pll_calc_pck(int is_tft, unsigned long pck, + struct dsi_clock_info *cinfo) +{ + struct dsi_clock_info cur, best; + + DSSDBG("dsi_pll_calc\n"); + + memset(&best, 0, sizeof(best)); + + memset(&cur, 0, sizeof(cur)); + cur.clkin = clk_get_rate(dsi.dss2_fck); + cur.use_dss2_fck = 1; + cur.highfreq = 0; + + /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ + /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ + /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ + for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { + if (cur.highfreq == 0) + cur.fint = cur.clkin / cur.regn; + else + cur.fint = cur.clkin / (2 * cur.regn); + + if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) + continue; + + /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ + for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { + unsigned long a, b; + + a = 2 * cur.regm * (cur.clkin/1000); + b = cur.regn * (cur.highfreq + 1); + cur.dsiphy = a / b * 1000; + + if (cur.dsiphy > 1800 * 1000 * 1000) + break; + + /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ + for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; + ++cur.regm3) { + int r; + + cur.dispc_fck = cur.dsiphy / cur.regm3; + + /* this will narrow down the search a bit, + * but still give pixclocks below what was + * requested */ + if (cur.dispc_fck < pck) + break; + + if (cur.dispc_fck > DISPC_MAX_FCK) + continue; + +#ifdef CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK + if (cur.dispc_fck < + pck * CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK) + continue; +#endif + r = iterate_dispc_divs(is_tft, pck, + &cur, &best); + if (r == 1) + goto found; + + } + } + } +found: + + /* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4 < 173MHz */ + /* hardcoded 48MHz for now. what should it be? */ + best.regm4 = best.dsiphy / (48000000); + if (best.regm4 > REGM4_MAX) + best.regm4 = REGM4_MAX; + best.dsi_fck = best.dsiphy / best.regm4; + + *cinfo = best; + + return 0; +} + +static int dsi_pll_calc_datafreq(unsigned long datafreq, + struct dsi_clock_info *cinfo) +{ + struct dsi_clock_info cur, best; + const int use_dss2_fck = 1; + + DSSDBG("dsi_pll_calc_datarate\n"); + + memset(&best, 0, sizeof(best)); + + memset(&cur, 0, sizeof(cur)); + cur.use_dss2_fck = use_dss2_fck; + if (use_dss2_fck) { + cur.clkin = clk_get_rate(dsi.dss2_fck); + cur.highfreq = 0; + } else { + cur.clkin = dispc_pclk_rate(); + if (cur.clkin < 32000000) + cur.highfreq = 0; + else + cur.highfreq = 1; + } + + /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ + /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ + /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ + for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { + if (cur.highfreq == 0) + cur.fint = cur.clkin / cur.regn; + else + cur.fint = cur.clkin / (2 * cur.regn); + + if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) + continue; + + /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ + for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { + unsigned long a, b; + + a = 2 * cur.regm * (cur.clkin/1000); + b = cur.regn * (cur.highfreq + 1); + cur.dsiphy = a / b * 1000; + + if (cur.dsiphy > 1800 * 1000 * 1000) + break; + + if (abs(cur.dsiphy - datafreq) < + abs(best.dsiphy - datafreq)) { + best = cur; + /* DSSDBG("best %ld\n", best.dsiphy); */ + } + + if (cur.dsiphy == datafreq) + goto found; + } + } +found: + /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ + /* hardcoded 48MHz for now. what should it be? */ + best.regm3 = best.dsiphy / (48000000); + if (best.regm3 > REGM3_MAX) + best.regm3 = REGM3_MAX; + best.dispc_fck = best.dsiphy / best.regm3; + + /* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4 < 173MHz */ + /* hardcoded 48MHz for now. what should it be? */ + best.regm4 = best.dsiphy / (48000000); + if (best.regm4 > REGM4_MAX) + best.regm4 = REGM4_MAX; + best.dsi_fck = best.dsiphy / best.regm4; + + *cinfo = best; + + return 0; +} + +int dsi_pll_program(struct dsi_clock_info *cinfo) +{ + int r = 0; + u32 l; + + DSSDBG("dsi_pll_program\n"); + + enable_clocks(1); + + dsi.dsiphy = cinfo->dsiphy; + dsi.ddr_clk = dsi.dsiphy / 4; + dsi.dsi1_pll_fclk = cinfo->dispc_fck; + dsi.dsi2_pll_fclk = cinfo->dsi_fck; + + DSSDBG("DSI Fint %ld\n", cinfo->fint); + + DSSDBG("clkin (%s) rate %ld, highfreq %d\n", + cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", + cinfo->clkin, + cinfo->highfreq); + + /* DSIPHY == CLKIN4DDR */ + DSSDBG("DSIPHY = 2 * %d / %d * %lu / %d = %lu\n", + cinfo->regm, + cinfo->regn, + cinfo->clkin, + cinfo->highfreq + 1, + cinfo->dsiphy); + + DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", + dsi.dsiphy / 1000 / 1000 / 2); + + DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk); + + DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", + cinfo->regm3, cinfo->dispc_fck); + DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", + cinfo->regm4, cinfo->dsi_fck); + + REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ + + l = dsi_read_reg(DSI_PLL_CONFIGURATION1); + l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ + l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ + l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ + l = FLD_MOD(l, cinfo->regm3 - 1, 22, 19); /* DSI_CLOCK_DIV */ + l = FLD_MOD(l, cinfo->regm4 - 1, 26, 23); /* DSIPROTO_CLOCK_DIV */ + dsi_write_reg(DSI_PLL_CONFIGURATION1, l); + + l = dsi_read_reg(DSI_PLL_CONFIGURATION2); + l = FLD_MOD(l, 7, 4, 1); /* DSI_PLL_FREQSEL */ + /* DSI_PLL_CLKSEL */ + l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, 11, 11); + l = FLD_MOD(l, cinfo->highfreq, 12, 12); /* DSI_PLL_HIGHFREQ */ + l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ + l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ + l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ + dsi_write_reg(DSI_PLL_CONFIGURATION2, l); + + REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ + + if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { + DSSERR("dsi pll go bit not going down.\n"); + r = -EIO; + goto err; + } + + if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { + DSSERR("DSI: cannot lock PLL\n"); + r = -EIO; + goto err; + } + + l = dsi_read_reg(DSI_PLL_CONFIGURATION2); + l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ + l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ + l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ + l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ + l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ + l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ + l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ + l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ + l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ + l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ + l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ + l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ + l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ + l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ + dsi_write_reg(DSI_PLL_CONFIGURATION2, l); + + DSSDBG("PLL config done\n"); +err: + enable_clocks(0); + + return r; +} + +int dsi_pll_init(int enable_hsclk, int enable_hsdiv) +{ + int r = 0; + int fck_div, lck_div, pck_div; + unsigned long fck; + enum dsi_pll_power_state pwstate; + + DSSDBG("PLL init\n"); + + enable_clocks(1); + dsi_enable_pll_clock(1); + + /* configure dispc fck and pixel clock to something sane */ + fck = dispc_calc_clock_div(1, 48 * 1000 * 1000, + &fck_div, &lck_div, &pck_div); + if (fck == 0) + return -EINVAL; + + dispc_set_clock_div(fck_div, lck_div, pck_div); + + /* PLL does not come out of reset without this... */ + dispc_pck_free_enable(1); + + if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { + DSSERR("DSI: PLL not coming out of reset.\n"); + r = -ENODEV; + goto err; + } + + /* ... but if left on, we get problems when planes do not + * fill the whole display. No idea about this XXX */ + dispc_pck_free_enable(0); + + if (enable_hsclk && enable_hsdiv) + pwstate = DSI_PLL_POWER_ON_ALL; + else if (enable_hsclk) + pwstate = DSI_PLL_POWER_ON_HSCLK; + else if (enable_hsdiv) + pwstate = DSI_PLL_POWER_ON_DIV; + else + pwstate = DSI_PLL_POWER_OFF; + + r = dsi_pll_power(pwstate); + + if (r) + goto err; + + enable_clocks(0); + + DSSDBG("PLL init done\n"); + + return 0; +err: + enable_clocks(0); + dsi_enable_pll_clock(0); + return r; +} + +void dsi_pll_uninit(void) +{ + dsi_pll_power(DSI_PLL_POWER_OFF); + dsi_enable_pll_clock(0); + DSSDBG("PLL uninit done\n"); +} + +unsigned long dsi_get_dsi1_pll_rate(void) +{ + return dsi.dsi1_pll_fclk; +} + +unsigned long dsi_get_dsi2_pll_rate(void) +{ + return dsi.dsi2_pll_fclk; +} + +ssize_t dsi_print_clocks(char *buf, ssize_t size) +{ + ssize_t l = 0; + int clksel; + + enable_clocks(1); + + clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); + + l += snprintf(buf + l, size - l, "- dsi -\n"); + + l += snprintf(buf + l, size - l, "dsi fclk source = %s\n", + dss_get_dsi_clk_source() == 0 ? + "dss1_alwon_fclk" : "dsi2_pll_fclk"); + + l += snprintf(buf + l, size - l, "dsi pll source = %s\n", + clksel == 0 ? + "dss2_alwon_fclk" : "pclkfree"); + + l += snprintf(buf + l, size - l, + "DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n", + dsi.dsiphy, dsi.ddr_clk); + + l += snprintf(buf + l, size - l, + "dsi1_pll_fck\t%lu (%s)\n" + "dsi2_pll_fck\t%lu (%s)\n", + dsi.dsi1_pll_fclk, + dss_get_dispc_clk_source() == 0 ? "off" : "on", + dsi.dsi2_pll_fclk, + dss_get_dsi_clk_source() == 0 ? "off" : "on"); + + enable_clocks(0); + + return l; +} + + +enum dsi_complexio_power_state { + DSI_COMPLEXIO_POWER_OFF = 0x0, + DSI_COMPLEXIO_POWER_ON = 0x1, + DSI_COMPLEXIO_POWER_ULPS = 0x2, +}; + +static int dsi_complexio_power(enum dsi_complexio_power_state state) +{ + int t = 0; + + /* PWR_CMD */ + REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); + + /* PWR_STATUS */ + while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { + udelay(1); + if (t++ > 1000) { + DSSERR("DSI: failed to set complexio power state to " + "%d\n", state); + return -ENODEV; + } + } + + return 0; +} + +static void dsi_complexio_config(struct omap_display *display) +{ + u32 r; + + int clk_lane = display->hw_config.u.dsi.clk_lane; + int data1_lane = display->hw_config.u.dsi.data1_lane; + int data2_lane = display->hw_config.u.dsi.data2_lane; + int clk_pol = display->hw_config.u.dsi.clk_pol; + int data1_pol = display->hw_config.u.dsi.data1_pol; + int data2_pol = display->hw_config.u.dsi.data2_pol; + + r = dsi_read_reg(DSI_COMPLEXIO_CFG1); + r = FLD_MOD(r, clk_lane, 2, 0); + r = FLD_MOD(r, clk_pol, 3, 3); + r = FLD_MOD(r, data1_lane, 6, 4); + r = FLD_MOD(r, data1_pol, 7, 7); + r = FLD_MOD(r, data2_lane, 10, 8); + r = FLD_MOD(r, data2_pol, 11, 11); + dsi_write_reg(DSI_COMPLEXIO_CFG1, r); + + /* The configuration of the DSI complex I/O (number of data lanes, + position, differential order) should not be changed while + DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for + the hardware to take into account a new configuration of the complex + I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to + follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, + then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set + DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the + DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the + DSI complex I/O configuration is unknown. */ + + /* + REG_FLD_MOD(DSI_CTRL, 1, 0, 0); + REG_FLD_MOD(DSI_CTRL, 0, 0, 0); + REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); + REG_FLD_MOD(DSI_CTRL, 1, 0, 0); + */ +} + +static inline int ns2ddr(int ns) +{ + /* convert time in ns to ddr ticks, rounding up */ + return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000; +} + +static void dsi_complexio_timings(void) +{ + u32 r; + u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; + u32 tlpx_half, tclk_trail, tclk_zero; + u32 tclk_prepare; + + /* calculate timings */ + + /* 1 * DDR_CLK = 2 * UI */ + + /* min 40ns + 4*UI max 85ns + 6*UI */ + ths_prepare = ns2ddr(59) + 2; + + /* min 145ns + 10*UI */ + ths_prepare_ths_zero = ns2ddr(145) + 5; + + /* min max(8*UI, 60ns+4*UI) */ + ths_trail = max(4, ns2ddr(60) + 2); + + /* min 100ns */ + ths_exit = ns2ddr(100); + + /* tlpx min 50n */ + tlpx_half = ns2ddr(25); + + /* min 60ns */ + tclk_trail = ns2ddr(60); + + /* min 38ns, max 95ns */ + tclk_prepare = ns2ddr(38); + + /* min tclk-prepare + tclk-zero = 300ns */ + tclk_zero = ns2ddr(300 - 38); + +#ifdef VERBOSE + DSSDBG("ths_prepare %d, ths_prepare_ths_zero %d\n", + ths_prepare, ths_prepare_ths_zero); + DSSDBG("ths_trail %d, ths_exit %d\n", ths_trail, ths_exit); + + + DSSDBG("tlpx_half %d, tclk_trail %d, tclk_zero %d\n", tlpx_half, + tclk_trail, tclk_zero); + DSSDBG("tclk_prepare %d\n", tclk_prepare); +#endif + + /* program timings */ + + r = dsi_read_reg(DSIPHY_CFG0); + r = FLD_MOD(r, ths_prepare, 31, 24); + r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); + r = FLD_MOD(r, ths_trail, 15, 8); + r = FLD_MOD(r, ths_exit, 7, 0); + dsi_write_reg(DSIPHY_CFG0, r); + + r = dsi_read_reg(DSIPHY_CFG1); + r = FLD_MOD(r, tlpx_half, 22, 16); + r = FLD_MOD(r, tclk_trail, 15, 8); + r = FLD_MOD(r, tclk_zero, 7, 0); + dsi_write_reg(DSIPHY_CFG1, r); + + r = dsi_read_reg(DSIPHY_CFG2); + r = FLD_MOD(r, tclk_prepare, 7, 0); + dsi_write_reg(DSIPHY_CFG2, r); +} + + +static int dsi_complexio_init(struct omap_display *display) +{ + int r = 0; + + DSSDBG("dsi_complexio_init\n"); + + /* CIO_CLK_ICG, enable L3 clk to CIO */ + REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); + + if (wait_for_bit_change(DSIPHY_CFG5, 30, 1) != 1) { + DSSERR("DSI: ComplexIO PHY not coming out of reset.\n"); + r = -ENODEV; + goto err; + } + + dsi_complexio_config(display); + + r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); + + if (r) + goto err; + + if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { + DSSERR("DSI: ComplexIO not coming out of reset.\n"); + r = -ENODEV; + goto err; + } + + if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { + DSSERR("DSI: ComplexIO LDO power down.\n"); + r = -ENODEV; + goto err; + } + + dsi_complexio_timings(); + + /* + The configuration of the DSI complex I/O (number of data lanes, + position, differential order) should not be changed while + DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the + hardware to recognize a new configuration of the complex I/O (done + in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow + this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next + reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] + LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN + bit to 1. If the sequence is not followed, the DSi complex I/O + configuration is undetermined. + */ + dsi_if_enable(1); + dsi_if_enable(0); + REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ + dsi_if_enable(1); + dsi_if_enable(0); + + DSSDBG("CIO init done\n"); +err: + return r; +} + +static void dsi_complexio_uninit(void) +{ + dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); +} + + + +static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, + enum fifo_size size3, enum fifo_size size4) +{ + u32 r = 0; + int add = 0; + int i; + + dsi.vc[0].fifo_size = size1; + dsi.vc[1].fifo_size = size2; + dsi.vc[2].fifo_size = size3; + dsi.vc[3].fifo_size = size4; + + for (i = 0; i < 4; i++) { + u8 v; + int size = dsi.vc[i].fifo_size; + + if (add + size > 4) { + DSSERR("DSI: Illegal FIFO configuration\n"); + BUG(); + } + + v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); + r |= v << (8 * i); + /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ + add += size; + } + + dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); +} + +static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, + enum fifo_size size3, enum fifo_size size4) +{ + u32 r = 0; + int add = 0; + int i; + + dsi.vc[0].fifo_size = size1; + dsi.vc[1].fifo_size = size2; + dsi.vc[2].fifo_size = size3; + dsi.vc[3].fifo_size = size4; + + for (i = 0; i < 4; i++) { + u8 v; + int size = dsi.vc[i].fifo_size; + + if (add + size > 4) { + DSSERR("DSI: Illegal FIFO configuration\n"); + BUG(); + } + + v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); + r |= v << (8 * i); + /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ + add += size; + } + + dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); +} + +static int dsi_force_tx_stop_mode_io(void) +{ + u32 r; + + r = dsi_read_reg(DSI_TIMING1); + r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ + dsi_write_reg(DSI_TIMING1, r); + + if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { + DSSERR("TX_STOP bit not going down\n"); + return -EIO; + } + + return 0; +} + +static void dsi_vc_print_status(int channel) +{ + u32 r; + + r = dsi_read_reg(DSI_VC_CTRL(channel)); + DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " + "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", + channel, + FLD_GET(r, 5, 5), + FLD_GET(r, 6, 6), + FLD_GET(r, 15, 15), + FLD_GET(r, 16, 16), + FLD_GET(r, 20, 20)); + + r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); + DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); +} + +static void dsi_vc_config(int channel) +{ + u32 r; + + DSSDBG("dsi_vc_config %d\n", channel); + + r = dsi_read_reg(DSI_VC_CTRL(channel)); + + r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ + r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ + r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ + r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ + r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ + r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ + r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ + + r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ + r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ + + dsi_write_reg(DSI_VC_CTRL(channel), r); +} + +static void dsi_vc_config_vp(int channel) +{ + u32 r; + + DSSDBG("dsi_vc_config_vp\n"); + + r = dsi_read_reg(DSI_VC_CTRL(channel)); + + r = FLD_MOD(r, 1, 1, 1); /* SOURCE, 1 = video port */ + r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ + r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ + r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ + r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ + r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ + r = FLD_MOD(r, 1, 9, 9); /* MODE_SPEED, high speed on/off */ + + r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ + r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ + + dsi_write_reg(DSI_VC_CTRL(channel), r); +} + + +static int dsi_vc_enable(int channel, int enable) +{ + DSSDBG("dsi_vc_enable channel %d, enable %d\n", channel, enable); + + enable = enable ? 1 : 0; + + REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); + + if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { + DSSERR("Failed to set dsi_vc_enable to %d\n", enable); + return -EIO; + } + + return 0; +} + +static void dsi_vc_enable_hs(int channel, int enable) +{ + DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); + + dsi_vc_enable(channel, 0); + dsi_if_enable(0); + + REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); + + dsi_vc_enable(channel, 1); + dsi_if_enable(1); + + dsi_force_tx_stop_mode_io(); +} + +static void dsi_vc_flush_long_data(int channel) +{ + while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { + u32 val; + val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); + DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", + (val >> 0) & 0xff, + (val >> 8) & 0xff, + (val >> 16) & 0xff, + (val >> 24) & 0xff); + } +} + +static u16 dsi_vc_flush_receive_data(int channel) +{ + /* RX_FIFO_NOT_EMPTY */ + while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { + u32 val; + u8 dt; + val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); + DSSDBG("\trawval %#08x\n", val); + dt = FLD_GET(val, 7, 0); + if (dt == DSI_DT_RX_ACK_WITH_ERR) { + u16 err = FLD_GET(val, 23, 8); + DSSERR("\tACK with ERROR: %#x\n", err); + if (err & (1 << 9)) + DSSERR("\t\tECC multibit\n"); + if (err & (1 << 11)) + DSSERR("\t\tData type not recognized\n"); + if (err & (1 << 12)) + DSSERR("\t\tInvalid VC ID\n"); + + } else if (dt == DSI_DT_RX_SHORT_READ_1) { + DSSDBG("\tDCS short response, 1 byte: %#x\n", + FLD_GET(val, 23, 8)); + return FLD_GET(val, 23, 8); + } else if (dt == DSI_DT_RX_SHORT_READ_2) { + DSSDBG("\tDCS short response, 2 byte: %#x\n", + FLD_GET(val, 23, 8)); + return FLD_GET(val, 23, 8); + } else if (dt == DSI_DT_RX_DCS_LONG_READ) { + DSSDBG("\tDCS long response, len %d\n", + FLD_GET(val, 23, 8)); + dsi_vc_flush_long_data(channel); + } else { + DSSERR("\tunknown datatype\n"); + } + } + return 0; +} + +static int dsi_vc_send_bta(int channel) +{ + unsigned long tmo; + + /*DSSDBG("dsi_vc_send_bta_sync %d\n", channel); */ + + if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ + DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); + dsi_vc_flush_receive_data(channel); + } + + REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ + + tmo = jiffies + msecs_to_jiffies(10); + while (REG_GET(DSI_VC_CTRL(channel), 6, 6) == 1) { + if (time_after(jiffies, tmo)) { + DSSERR("Failed to send BTA\n"); + return -EIO; + } + } + + return 0; +} + +static int dsi_vc_send_bta_sync(int channel) +{ + int r = 0; + + init_completion(&dsi.bta_completion); + + dsi_vc_enable_bta_irq(channel); + + r = dsi_vc_send_bta(channel); + if (r) + goto err; + + if (wait_for_completion_timeout(&dsi.bta_completion, + msecs_to_jiffies(500)) == 0) { + DSSERR("Failed to receive BTA\n"); + r = -EIO; + goto err; + } +err: + dsi_vc_disable_bta_irq(channel); + + return r; +} + +static inline void dsi_vc_write_long_header(int channel, u8 data_type, + u16 len, u8 ecc) +{ + u32 val; + u8 data_id; + + /*data_id = data_type | channel << 6; */ + data_id = data_type | dsi.vc[channel].dest_per << 6; + + val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | + FLD_VAL(ecc, 31, 24); + + dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); +} + +static inline void dsi_vc_write_long_payload(int channel, + u8 b1, u8 b2, u8 b3, u8 b4) +{ + u32 val; + + val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; + +/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", + b1, b2, b3, b4, val); */ + + dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); +} + +static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, + u8 ecc) +{ + /*u32 val; */ + int i; + u8 *p; + int r = 0; + u8 b1, b2, b3, b4; + + /*DSSDBG("dsi_vc_send_long, %d bytes\n", len); */ + + /* len + header */ + if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { + DSSERR("DSI: unable to send long packet: packet too long.\n"); + return -EINVAL; + } + + dsi_vc_write_long_header(channel, data_type, len, ecc); + + /*dsi_vc_print_status(0); */ + + p = data; + for (i = 0; i < len >> 2; i++) { + /*DSSDBG("\tsending full packet %d\n", i); */ + /*dsi_vc_print_status(0); */ + + b1 = *p++; + b2 = *p++; + b3 = *p++; + b4 = *p++; + + dsi_vc_write_long_payload(channel, b1, b2, b3, b4); + } + + i = len % 4; + if (i) { + b1 = 0; b2 = 0; b3 = 0; + + /*DSSDBG("\tsending remainder bytes %d\n", i); */ + + switch (i) { + case 3: + b1 = *p++; + b2 = *p++; + b3 = *p++; + break; + case 2: + b1 = *p++; + b2 = *p++; + break; + case 1: + b1 = *p++; + break; + } + + dsi_vc_write_long_payload(channel, b1, b2, b3, 0); + } + + return r; +} + +static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) +{ + u32 r; + u8 data_id; +/* + DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", + channel, + data_type, data & 0xff, (data >> 8) & 0xff); +*/ + if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { + DSSERR("ERROR FIFO FULL, aborting transfer\n"); + return -EINVAL; + } + + data_id = data_type | channel << 6; + + r = (data_id << 0) | (data << 8) | (ecc << 24); + + dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); + + return 0; +} + +int dsi_vc_send_null(int channel) +{ + u8 nullpkg[] = {0, 0, 0, 0}; + return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); +} +EXPORT_SYMBOL(dsi_vc_send_null); + +int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) +{ + int r; + + BUG_ON(len == 0); + + if (len == 1) { + r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, + data[0], 0); + } else if (len == 2) { + r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, + data[0] | (data[1] << 8), 0); + } else { + /* 0x39 = DCS Long Write */ + r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, + data, len, 0); + } + + return r; +} +EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); + +int dsi_vc_dcs_write(int channel, u8 *data, int len) +{ + int r; + + r = dsi_vc_dcs_write_nosync(channel, data, len); + if (r) + return r; + + /* Some devices need time to process the msg in low power mode. + This also makes the write synchronous, and checks that + the peripheral is still alive */ + r = dsi_vc_send_bta_sync(channel); + + return r; +} +EXPORT_SYMBOL(dsi_vc_dcs_write); + +int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) +{ + u32 val; + u8 dt; + int debug = 0; + + if (debug) + DSSDBG("dsi_vc_dcs_read\n"); + + dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); + + dsi_vc_send_bta_sync(channel); + + val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); + if (debug) + DSSDBG("\trawval %#08x\n", val); + dt = FLD_GET(val, 7, 0); + if (dt == DSI_DT_RX_ACK_WITH_ERR) { + u16 err = FLD_GET(val, 23, 8); + DSSERR("\tACK with ERROR: %#x\n", err); + if (err & (1 << 9)) + DSSERR("\t\tECC multibit\n"); + if (err & (1 << 11)) + DSSERR("\t\tData type not recognized\n"); + if (err & (1 << 12)) + DSSERR("\t\tInvalid VC ID\n"); + return -1; + + } else if (dt == DSI_DT_RX_SHORT_READ_1) { + u8 data = FLD_GET(val, 15, 8); + if (debug) + DSSDBG("\tDCS short response, 1 byte: %#x\n", data); + + if (buflen < 1) + return -1; + + buf[0] = data; + + return 1; + } else if (dt == DSI_DT_RX_SHORT_READ_2) { + u16 data = FLD_GET(val, 23, 8); + if (debug) + DSSDBG("\tDCS short response, 2 byte: %#x\n", data); + + if (buflen < 2) + return -1; + + buf[0] = data & 0xff; + buf[1] = (data >> 8) & 0xff; + + return 2; + } else if (dt == DSI_DT_RX_DCS_LONG_READ) { + int x; + int len = FLD_GET(val, 23, 8); + if (debug) + DSSDBG("\tDCS long response, len %d\n", len); + + if (len > buflen) + return -1; + + x = 0; + while (x < len) { + val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); + if (debug) + DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 " + "%#02x\n", + (val >> 0) & 0xff, + (val >> 8) & 0xff, + (val >> 16) & 0xff, + (val >> 24) & 0xff); + + if (x < len) + buf[x++] = (val >> 0) & 0xff; + if (x < len) + buf[x++] = (val >> 8) & 0xff; + if (x < len) + buf[x++] = (val >> 16) & 0xff; + if (x < len) + buf[x++] = (val >> 24) & 0xff; + } + + return len; + } else { + DSSERR("\tunknown datatype\n"); + return -1; + } +} +EXPORT_SYMBOL(dsi_vc_dcs_read); + + +int dsi_vc_set_max_rx_packet_size(int channel, u16 len) +{ + return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, + len, 0); +} +EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); + + +static int dsi_set_lp_rx_timeout(int ns, int x4, int x16) +{ + u32 r; + unsigned long fck; + int ticks; + + /* ticks in DSI_FCK */ + + fck = dsi_fclk_rate(); + ticks = (fck / 1000 / 1000) * ns / 1000; + + if (ticks > 0x1fff) { + DSSERR("LP_TX_TO too high\n"); + return -EINVAL; + } + + r = dsi_read_reg(DSI_TIMING2); + r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ + r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ + r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ + r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ + dsi_write_reg(DSI_TIMING2, r); + + DSSDBG("LP_RX_TO %ld ns (%#x ticks)\n", + (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / + (fck / 1000 / 1000), + ticks); + + return 0; +} + +static int dsi_set_ta_timeout(int ns, int x8, int x16) +{ + u32 r; + unsigned long fck; + int ticks; + + /* ticks in DSI_FCK */ + + fck = dsi_fclk_rate(); + ticks = (fck / 1000 / 1000) * ns / 1000; + + if (ticks > 0x1fff) { + DSSERR("TA_TO too high\n"); + return -EINVAL; + } + + r = dsi_read_reg(DSI_TIMING1); + r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ + r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ + r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ + r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ + dsi_write_reg(DSI_TIMING1, r); + + DSSDBG("TA_TO %ld ns (%#x ticks)\n", + (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / + (fck / 1000 / 1000), + ticks); + + return 0; +} + +static int dsi_set_stop_state_counter(int ns, int x4, int x16) +{ + u32 r; + unsigned long fck; + int ticks; + + /* ticks in DSI_FCK */ + + fck = dsi_fclk_rate(); + ticks = (fck / 1000 / 1000) * ns / 1000; + + if (ticks > 0x1fff) { + DSSERR("STOP_STATE_COUNTER_IO too high\n"); + return -EINVAL; + } + + r = dsi_read_reg(DSI_TIMING1); + r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ + r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ + r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ + r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ + dsi_write_reg(DSI_TIMING1, r); + + DSSDBG("STOP_STATE_COUNTER %ld ns (%#x ticks)\n", + (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / + (fck / 1000 / 1000), + ticks); + + return 0; +} + +static int dsi_set_hs_tx_timeout(int ns, int x4, int x16) +{ + u32 r; + unsigned long fck; + int ticks; + + /* ticks in TxByteClkHS */ + + fck = dsi.ddr_clk / 4; + ticks = (fck / 1000 / 1000) * ns / 1000; + + if (ticks > 0x1fff) { + DSSERR("HS_TX_TO too high\n"); + return -EINVAL; + } + + r = dsi_read_reg(DSI_TIMING2); + r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ + r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ + r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ + r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ + dsi_write_reg(DSI_TIMING2, r); + + DSSDBG("HS_TX_TO %ld ns (%#x ticks)\n", + (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / + (fck / 1000 / 1000), + ticks); + + return 0; +} +static int dsi_proto_config(struct omap_display *display) +{ + u32 r; + int buswidth = 0; + + dsi_config_tx_fifo(DSI_FIFO_SIZE_128, + DSI_FIFO_SIZE_0, + DSI_FIFO_SIZE_0, + DSI_FIFO_SIZE_0); + + dsi_config_rx_fifo(DSI_FIFO_SIZE_128, + DSI_FIFO_SIZE_0, + DSI_FIFO_SIZE_0, + DSI_FIFO_SIZE_0); + + /* XXX what values for the timeouts? */ + dsi_set_stop_state_counter(1000, 0, 0); + + dsi_set_ta_timeout(50000, 1, 1); + + /* 3000ns * 16 */ + dsi_set_lp_rx_timeout(3000, 0, 1); + + /* 10000ns * 4 */ + dsi_set_hs_tx_timeout(10000, 1, 0); + + switch (display->bpp) { + case 16: + buswidth = 0; + break; + case 18: + buswidth = 1; + break; + case 24: + buswidth = 2; + break; + default: + BUG(); + } + + r = dsi_read_reg(DSI_CTRL); + r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ + r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ + r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ + /* XXX what should the ratio be */ + r = FLD_MOD(r, 0, 4, 4); /* VP_CLK_RATIO, VP_PCLK = VP_CLK/2 */ + r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ + r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ + r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ + r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ + r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ + r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ + r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ + + dsi_write_reg(DSI_CTRL, r); + + /* we configure vc0 for L4 communication, and + * vc1 for dispc */ + dsi_vc_config(0); + dsi_vc_config_vp(1); + + /* set all vc targets to peripheral 0 */ + dsi.vc[0].dest_per = 0; + dsi.vc[1].dest_per = 0; + dsi.vc[2].dest_per = 0; + dsi.vc[3].dest_per = 0; + + return 0; +} + +static void dsi_proto_timings(void) +{ + int tlpx_half, tclk_zero, tclk_prepare, tclk_trail; + int tclk_pre, tclk_post; + int ddr_clk_pre, ddr_clk_post; + u32 r; + + r = dsi_read_reg(DSIPHY_CFG1); + tlpx_half = FLD_GET(r, 22, 16); + tclk_trail = FLD_GET(r, 15, 8); + tclk_zero = FLD_GET(r, 7, 0); + + r = dsi_read_reg(DSIPHY_CFG2); + tclk_prepare = FLD_GET(r, 7, 0); + + /* min 8*UI */ + tclk_pre = 4; + /* min 60ns + 52*UI */ + tclk_post = ns2ddr(60) + 26; + + ddr_clk_pre = (tclk_pre + tlpx_half*2 + tclk_zero + tclk_prepare) / 4; + ddr_clk_post = (tclk_post + tclk_trail) / 4; + + r = dsi_read_reg(DSI_CLK_TIMING); + r = FLD_MOD(r, ddr_clk_pre, 15, 8); + r = FLD_MOD(r, ddr_clk_post, 7, 0); + dsi_write_reg(DSI_CLK_TIMING, r); + +#ifdef VERBOSE + DSSDBG("ddr_clk_pre %d, ddr_clk_post %d\n", + ddr_clk_pre, + ddr_clk_post); +#endif +} + + +#define DSI_DECL_VARS \ + int __dsi_cb = 0; u32 __dsi_cv = 0; + +#define DSI_FLUSH(ch) \ + if (__dsi_cb > 0) { \ + /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ + dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ + __dsi_cb = __dsi_cv = 0; \ + } + +#define DSI_PUSH(ch, data) \ + do { \ + __dsi_cv |= (data) << (__dsi_cb * 8); \ + /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ + if (++__dsi_cb > 3) \ + DSI_FLUSH(ch); \ + } while (0) + +static int dsi_update_screen_l4(struct omap_display *display, + int x, int y, int w, int h) +{ + /* Note: supports only 24bit colors in 32bit container */ + int first = 1; + int fifo_stalls = 0; + int max_dsi_packet_size; + int max_data_per_packet; + int max_pixels_per_packet; + int pixels_left; + int bytespp = 3; + int scr_width; + u32 *data; + int start_offset; + int horiz_inc; + int current_x; + struct omap_overlay *ovl; + + debug_irq = 0; + + DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", + x, y, w, h); + + ovl = &display->manager->overlays[0]; + + if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) + return -EINVAL; + + if (display->ctrl->bpp != 24) + return -EINVAL; + + enable_clocks(1); + + scr_width = ovl->info.screen_width; + data = ovl->info.vaddr; + + start_offset = scr_width * y + x; + horiz_inc = scr_width - w; + current_x = x; + + /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes + * in fifo */ + + /* When using CPU, max long packet size is TX buffer size */ + max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; + + /* we seem to get better perf if we divide the tx fifo to half, + and while the other half is being sent, we fill the other half + max_dsi_packet_size /= 2; */ + + max_data_per_packet = max_dsi_packet_size - 4 - 1; + + max_pixels_per_packet = max_data_per_packet / bytespp; + + DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); + + display->ctrl->setup_update(display, x, y, w, h); + + pixels_left = w * h; + + DSSDBG("total pixels %d\n", pixels_left); + + data += start_offset; + + dsi.update_region.x = x; + dsi.update_region.y = y; + dsi.update_region.w = w; + dsi.update_region.h = h; + dsi.update_region.bytespp = bytespp; + + start_measuring(); + + while (pixels_left > 0) { + /* 0x2c = write_memory_start */ + /* 0x3c = write_memory_continue */ + u8 dcs_cmd = first ? 0x2c : 0x3c; + int pixels; + DSI_DECL_VARS; + first = 0; + +#if 1 + /* using fifo not empty */ + /* TX_FIFO_NOT_EMPTY */ + while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { + udelay(1); + fifo_stalls++; + if (fifo_stalls > 0xfffff) { + DSSERR("fifo stalls overflow, pixels left %d\n", + pixels_left); + dsi_if_enable(0); + enable_clocks(0); + return -EIO; + } + } +#elif 1 + /* using fifo emptiness */ + while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < + max_dsi_packet_size) { + fifo_stalls++; + if (fifo_stalls > 0xfffff) { + DSSERR("fifo stalls overflow, pixels left %d\n", + pixels_left); + dsi_if_enable(0); + enable_clocks(0); + return -EIO; + } + } +#else + while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { + fifo_stalls++; + if (fifo_stalls > 0xfffff) { + DSSERR("fifo stalls overflow, pixels left %d\n", + pixels_left); + dsi_if_enable(0); + enable_clocks(0); + return -EIO; + } + } +#endif + pixels = min(max_pixels_per_packet, pixels_left); + + pixels_left -= pixels; + + dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, + 1 + pixels * bytespp, 0); + + DSI_PUSH(0, dcs_cmd); + + while (pixels-- > 0) { + u32 pix = *data++; + + DSI_PUSH(0, (pix >> 16) & 0xff); + DSI_PUSH(0, (pix >> 8) & 0xff); + DSI_PUSH(0, (pix >> 0) & 0xff); + + current_x++; + if (current_x == x+w) { + current_x = x; + data += horiz_inc; + } + } + + DSI_FLUSH(0); + } + + end_measuring("L4"); + + enable_clocks(0); + + return 0; +} + +#if 0 +static void dsi_clear_screen_l4(struct omap_display *display, + int x, int y, int w, int h) +{ + int first = 1; + int fifo_stalls = 0; + int max_dsi_packet_size; + int max_data_per_packet; + int max_pixels_per_packet; + int pixels_left; + int bytespp = 3; + int pixnum; + + debug_irq = 0; + + DSSDBG("dsi_clear_screen_l4 (%d,%d %dx%d)\n", + x, y, w, h); + + if (display->ctrl->bpp != 24) + return -EINVAL; + + /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) + * bytes in fifo */ + + /* When using CPU, max long packet size is TX buffer size */ + max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; + + max_data_per_packet = max_dsi_packet_size - 4 - 1; + + max_pixels_per_packet = max_data_per_packet / bytespp; + + enable_clocks(1); + + display->ctrl->setup_update(display, x, y, w, h); + + pixels_left = w * h; + + dsi.update_region.x = x; + dsi.update_region.y = y; + dsi.update_region.w = w; + dsi.update_region.h = h; + dsi.update_region.bytespp = bytespp; + + start_measuring(); + + pixnum = 0; + + while (pixels_left > 0) { + /* 0x2c = write_memory_start */ + /* 0x3c = write_memory_continue */ + u8 dcs_cmd = first ? 0x2c : 0x3c; + int pixels; + DSI_DECL_VARS; + first = 0; + + /* TX_FIFO_NOT_EMPTY */ + while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { + fifo_stalls++; + if (fifo_stalls > 0xfffff) { + DSSERR("fifo stalls overflow\n"); + dsi_if_enable(0); + enable_clocks(0); + return; + } + } + + pixels = min(max_pixels_per_packet, pixels_left); + + pixels_left -= pixels; + + dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, + 1 + pixels * bytespp, 0); + + DSI_PUSH(0, dcs_cmd); + + while (pixels-- > 0) { + u32 pix; + + pix = 0x000000; + + DSI_PUSH(0, (pix >> 16) & 0xff); + DSI_PUSH(0, (pix >> 8) & 0xff); + DSI_PUSH(0, (pix >> 0) & 0xff); + } + + DSI_FLUSH(0); + } + + enable_clocks(0); + + end_measuring("L4 CLEAR"); +} +#endif + +static int dsi_wait_for_framedone(void) +{ + unsigned long flags; + + spin_lock_irqsave(&dsi.update_lock, flags); + if (dsi.update_ongoing) { + long wait = msecs_to_jiffies(1000); + dsi.update_syncers++; + spin_unlock_irqrestore(&dsi.update_lock, flags); + wait = wait_for_completion_timeout(&dsi.update_completion, + wait); + if (wait == 0) { + DSSERR("timeout waiting sync\n"); + return -ETIME; + } + } else { + spin_unlock_irqrestore(&dsi.update_lock, flags); + } + + return 0; +} + +static void dsi_setup_update_dispc(struct omap_display *display, + int x, int y, int w, int h) +{ + int bytespp = 3; + + DSSDBG("dsi_setup_update_dispc(%d,%d %dx%d)\n", + x, y, w, h); + + dsi.update_region.display = display; + dsi.update_region.x = x; + dsi.update_region.y = y; + dsi.update_region.w = w; + dsi.update_region.h = h; + dsi.update_region.bytespp = bytespp; + + enable_clocks(1); + + dispc_setup_partial_planes(display, &x, &y, &w, &h); + + dispc_set_lcd_size(w, h); + + enable_clocks(0); +} + +static void dsi_update_screen_dispc(struct omap_display *display) +{ + int bytespp = 3; + int total_len; + int line_packet_len; + int x, y, w, h; + u32 l; + + x = dsi.update_region.x; + y = dsi.update_region.y; + w = dsi.update_region.w; + h = dsi.update_region.h; + + DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", + x, y, w, h); + + enable_clocks(1); + + /* TODO: one packet could be longer, I think? Max is the line buffer */ + line_packet_len = w * bytespp + 1; /* 1 byte for DCS cmd */ + total_len = line_packet_len * h; + + display->ctrl->setup_update(display, x, y, w, h); + + if (0) + dsi_vc_print_status(1); + + start_measuring(); + + l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ + dsi_write_reg(DSI_VC_TE(1), l); + + dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, line_packet_len, 0); + + if (dsi.use_te) + l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ + else + l = FLD_MOD(l, 1, 31, 31); /* TE_START */ + dsi_write_reg(DSI_VC_TE(1), l); + + dispc_enable_lcd_out(1); + + if (dsi.use_te) + dsi_vc_send_bta(1); +} + +static void framedone_callback(void *data, u32 mask) +{ + if (dsi.framedone_scheduled) { + DSSERR("Framedone already scheduled. Bogus FRAMEDONE IRQ?\n"); + return; + } + + dsi.framedone_scheduled = 1; + + /* We get FRAMEDONE when DISPC has finished sending pixels and turns + * itself off. However, DSI still has the pixels in its buffers, and + * is sending the data. Thus we have to wait until we can do a new + * transfer or turn the clocks off. We do that in a separate work + * func. */ + schedule_work(&dsi.framedone_work); +} + +static void framedone_worker(struct work_struct *work) +{ + unsigned long flags; + u32 l; + unsigned long tmo; + int i = 0; + + l = REG_GET(DSI_VC_TE(1), 23, 0); /* TE_SIZE */ + + /* There shouldn't be much stuff in DSI buffers, if any, so we'll + * just busyloop */ + if (l > 0) { + tmo = jiffies + msecs_to_jiffies(50); + while (REG_GET(DSI_VC_TE(1), 23, 0) > 0) { /* TE_SIZE */ + i++; + if (time_after(jiffies, tmo)) { + DSSERR("timeout waiting TE_SIZE to zero\n"); + break; + } + cpu_relax(); + } + } + + if (REG_GET(DSI_VC_TE(1), 30, 30)) + DSSERR("TE_EN not zero\n"); + + if (REG_GET(DSI_VC_TE(1), 31, 31)) + DSSERR("TE_START not zero\n"); + + spin_lock_irqsave(&dsi.update_lock, flags); + if (dsi.update_ongoing == 0) { + spin_unlock_irqrestore(&dsi.update_lock, flags); + DSSERR("framedone irq without update request\n"); + return; + } + spin_unlock_irqrestore(&dsi.update_lock, flags); + + end_measuring("DISPC"); + + DSSDBG("FRAMEDONE\n"); + +#if 0 + if (l) + DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); +#else + if (l > 1024*3) + DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); +#endif + + spin_lock_irqsave(&dsi.update_lock, flags); + dsi.update_ongoing = 0; + while (dsi.update_syncers > 0) { + complete(&dsi.update_completion); + --dsi.update_syncers; + } + spin_unlock_irqrestore(&dsi.update_lock, flags); + +#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC + dispc_fake_vsync_irq(); +#endif + enable_clocks(0); + + dsi.framedone_scheduled = 0; + + if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { + spin_lock_irqsave(&dsi.update_lock, flags); + dsi.update_ongoing = 1; + spin_unlock_irqrestore(&dsi.update_lock, flags);... [truncated message content] |
