From: Antonino A. D. <ad...@gm...> - 2007-02-26 17:22:16
|
On Mon, 2007-02-26 at 18:13 +0100, DervishD wrote: > Hi Antonino :) > > * Antonino A. Daplas <ad...@gm...> dixit: > > On Mon, 2007-02-26 at 15:47 +0100, DervishD wrote: > > > From time to time, the tdfxfb driver from 2.6.19.5 (sorry, I cannot > > > test in 2.6.20.x because it doesn't compile, the infamous BDF negative > > > offset problem) garbles the display, leaving only a lot of thin lines, > > > just like sync was lost. The display can be repaired by switching to > > > another console, but this is annoying. This happens with a Voodoo 3 > > > 3000, using 800x600x8@100 mode. > > > > Try fbset -a -vyres 600 first and let us know of the result. > > After doing this, I no longer can garble the display (before, just a > "ls -lR /" was enough to do it, in fact, any big output garbled the > display). The only problem with this solution is that the scroll speed > has decreased a bit. In fact, the scroll speed is affected by the vyres > parameter a lot! The highter the vyres, the faster the scroll, and I > cannot reproduce the problem anymore after changing it once! Display panning is what makes scrolling fast which is the default scroll method if vyres > yres. Unfortunately, tdfxfb occasionally have problems with this method, the higher the vyres, the greater the likelihood of screen corruption. That's why tdfxb limits the vyres to a maximum of 4096. As to why the problem disappeared just by changing this parameter, that I too don't know. Tony |