Red Hat Linux
Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
You seem to have CSS turned off.
Please don't fill out this field.
Briefly describe the problem (required):
Please provide the ad click URL, if possible:
begin mail (beginmail@...) has submitted this feedback
cpu:athlon xp 1800+
The vesafb suceeded in loading framebuffer in vga=771,but failed even in vga=773.
I need a 1024x768 resolution with framebuffer.Is there the way to change the
vesafb driver to fit my video card?
$ dmesg |grep vesa
vesafb: probe of vesafb0 failed with error -6
And hereis ddcprobe\'s output:
VESA 3.0 detected.
OEM Name: NVIDIA
Vendor Name: NVIDIA Corporation
Product Name: NV18 Board
Product Revision: Chip Rev A2
Memory installed = 1024 * 64k blocks = 65536kb
Supported standard modes:
EDID ver. 1 rev. 3.
EISA ID: SAM0022
Serial number: 414e3137.
Manufactured in week 1 of 2003.
Input signal type: analog signal.
Screen size max 32 cm horizontal, 24 cm vertical.
DPMS flags: RGB, active off, no suspend, no standby.
640x480 @ 60 Hz (VGA)
640x480 @ 75 Hz (VESA)
800x600 @ 60 Hz (VESA)
Standard timing 0: 60 Hz, 640x480
Standard timing 1: 85 Hz, 640x480
Standard timing 2: 85 Hz, 800x600
Standard timing 3: 85 Hz, 1024x768
Standard timing 4: 60 Hz, 1280x1024
Detailed timing 0:
Pixel clock: 94500000
Horizontal active time (pixel width): 256
Horizontal blank time (pixel width): 1120
Vertical active time (pixel height): 0
Vertical blank time (pixel height): 808
Horizontal sync offset: 48
Horizontal sync pulse width: 96
Vertical sync offset: 3
Vertical sync pulse width: 1
Monitor details 1:
Timing ranges: horizontal = 30 - 71, vertical = 50 - 160
Monitor details 2:
Monitor details 3:
Serial number: HVCW100208
Sign up for the SourceForge newsletter: