Thread: [Linux-fbdev-devel] Rivafb not working properly in kernel 2.5.15.

Brought to you by: bradd, geertu, jsimmons, wyo

linux-fbdev-devel

[Linux-fbdev-devel] Rivafb not working properly in kernel 2.5.15.

From: Miles L. <mi...@me...> - 2002-05-11 15:15:53

I am running development kernel 2.5.15 and am having some
trouble getting rivafb to display in the correct mode.

After booting with "video=riva:1600x1200-16", fbset says:

mode "1600x1200-60"
     # D: 162.022 MHz, H: 75.010 kHz, V: 60.008 Hz
     geometry 1600 1200 1600 1200 16
     timings 6172 304 64 46 1 192 3
     hsync high
     vsync high
     accel true
     rgba 5/11,6/5,5/0,0/0
endmode

But the Tux logo is all purple.  After running fbset -a "1600x1200-76",
I seem to have the correct mode:

mode "1600x1200-76"
     # D: 197.981 MHz, H: 95.183 kHz, V: 76.146 Hz
     geometry 1600 1200 1600 1200 8
     timings 5051 304 40 42 3 136 5
     accel true
     rgba 8/0,8/0,8/0,0/0
endmode

What do I need to change about my append= line in order to get
the corrent mode set at boot time or is this a bug in the
rivafb code in 2.5.15?

Re: [Linux-fbdev-devel] Rivafb not working properly in kernel 2.5.15.

From: Jeff G. <jg...@ma...> - 2002-05-11 15:51:57

Miles Lane wrote:

> I am running development kernel 2.5.15 and am having some
> trouble getting rivafb to display in the correct mode.



Does 2.4.19-pre8 work for you?

Re: [Linux-fbdev-devel] Rivafb not working properly in kernel 2.5.15.

From: Miles L. <mi...@me...> - 2002-05-12 08:02:25

On Sat, 2002-05-11 at 08:50, Jeff Garzik wrote:
> Miles Lane wrote:
> 
> > I am running development kernel 2.5.15 and am having some
> > trouble getting rivafb to display in the correct mode.
>
> Does 2.4.19-pre8 work for you?

Yes, 2.4.19-pre8-ac2 fails in exactly the same way.

	Miles

Re: [Linux-fbdev-devel] Rivafb not working properly in kernel 2.5.15.

From: Ani J. <aj...@sh...> - 2002-05-12 17:23:50

What video board and arch (i'm assuming i386)?


ani

On Sat, 11 May 2002, Miles Lane wrote:

> I am running development kernel 2.5.15 and am having some
> trouble getting rivafb to display in the correct mode.
>
> After booting with "video=riva:1600x1200-16", fbset says:
>
> mode "1600x1200-60"
>      # D: 162.022 MHz, H: 75.010 kHz, V: 60.008 Hz
>      geometry 1600 1200 1600 1200 16
>      timings 6172 304 64 46 1 192 3
>      hsync high
>      vsync high
>      accel true
>      rgba 5/11,6/5,5/0,0/0
> endmode
>
> But the Tux logo is all purple.  After running fbset -a "1600x1200-76",
> I seem to have the correct mode:
>
> mode "1600x1200-76"
>      # D: 197.981 MHz, H: 95.183 kHz, V: 76.146 Hz
>      geometry 1600 1200 1600 1200 8
>      timings 5051 304 40 42 3 136 5
>      accel true
>      rgba 8/0,8/0,8/0,0/0
> endmode
>
> What do I need to change about my append= line in order to get
> the corrent mode set at boot time or is this a bug in the
> rivafb code in 2.5.15?
>
>
> _______________________________________________________________
>
> Have big pipes? SourceForge.net is looking for download mirrors. We supply
> the hardware. You get the recognition. Email Us: ban...@so...
> _______________________________________________
> Linux-fbdev-devel mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
>

Re: [Linux-fbdev-devel] Rivafb not working properly in kernel 2.5.15.

From: Miles L. <mi...@me...> - 2002-05-12 18:27:05

On Sun, 2002-05-12 at 10:34, Ani Joshi wrote:
> What video board and arch (i'm assuming i386)?


May 12 07:08:53 turbulence kernel: Linux version 2.4.19-pre8-ac2
(ro...@tu...) (gcc version 2.96 20000731 (Red Hat
Linux 7.1 2.96-98)) #1 Sun May 12 00:41:02 PDT 2002
May 12 07:08:54 turbulence kernel: Kernel command line: ro
root=/dev/hda6 hdd=ide-scsi console=ttyS0,38400 console=tty0
video=riva:1600x1200-16
May 12 07:08:54 turbulence kernel: Local APIC disabled by BIOS --
reenabling.
May 12 07:08:54 turbulence kernel: Found and enabled local APIC!
May 12 07:08:54 turbulence kernel: Initializing CPU#0
May 12 07:08:54 turbulence kernel: CPU: Before vendor init, caps:
0183fbff c1c3fbff 00000000, vendor = 2
May 12 07:08:54 turbulence kernel: CPU: L1 I Cache: 64K (64 bytes/line),
D cache 64K (64 bytes/line)
May 12 07:08:54 turbulence kernel: CPU: L2 Cache: 512K (64 bytes/line)
May 12 07:08:54 turbulence kernel: CPU: After vendor init, caps:
0183fbff c1c3fbff 00000000 00000000
May 12 07:08:54 turbulence kernel: Intel machine check architecture
supported.
May 12 07:08:54 turbulence kernel: Intel machine check reporting enabled
on CPU#0.
May 12 07:08:54 turbulence kernel: CPU:     After generic, caps:
0183fbff c1c3fbff 00000000 00000000
May 12 07:08:54 turbulence kernel: CPU:             Common caps:
0183fbff c1c3fbff 00000000 00000000
May 12 07:08:56 turbulence kernel: rivafb: RIVA MTRR set to ON
May 12 07:08:57 turbulence kernel: rivafb: PCI nVidia NV10 framebuffer
ver 0.9.3 (GeForce-DDR, 32MB @ 0xE8000000)

01:05.0 VGA compatible controller: nVidia Corporation GeForce 256 DDR
(rev 10) (prog-if 00 [VGA])
	Subsystem: VISIONTEK: Unknown device 000b
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at feaf0000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 2.0
		Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>


> 
> 
> ani
> 
> On Sat, 11 May 2002, Miles Lane wrote:
> 
> > I am running development kernel 2.5.15 and am having some
> > trouble getting rivafb to display in the correct mode.
> >
> > After booting with "video=riva:1600x1200-16", fbset says:
> >
> > mode "1600x1200-60"
> >      # D: 162.022 MHz, H: 75.010 kHz, V: 60.008 Hz
> >      geometry 1600 1200 1600 1200 16
> >      timings 6172 304 64 46 1 192 3
> >      hsync high
> >      vsync high
> >      accel true
> >      rgba 5/11,6/5,5/0,0/0
> > endmode
> >
> > But the Tux logo is all purple.  After running fbset -a "1600x1200-76",
> > I seem to have the correct mode:
> >
> > mode "1600x1200-76"
> >      # D: 197.981 MHz, H: 95.183 kHz, V: 76.146 Hz
> >      geometry 1600 1200 1600 1200 8
> >      timings 5051 304 40 42 3 136 5
> >      accel true
> >      rgba 8/0,8/0,8/0,0/0
> > endmode
> >
> > What do I need to change about my append= line in order to get
> > the corrent mode set at boot time or is this a bug in the
> > rivafb code in 2.5.15?
> >
> >
> > _______________________________________________________________
> >
> > Have big pipes? SourceForge.net is looking for download mirrors. We supply
> > the hardware. You get the recognition. Email Us: ban...@so...
> > _______________________________________________
> > Linux-fbdev-devel mailing list
> > Lin...@li...
> > https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
> >
>

[Linux-fbdev-devel] Re: Rivafb not working properly in kernel 2.5.15.

From: Miles L. <mi...@me...> - 2002-05-13 00:52:01

Hmm.  I just realised may still not have given enough information.
Here is a bit more.

vendor_id 
: AuthenticAMD
cpu family	: 6
model 
	: 2
model name	: AMD Athlon(tm) Processor
cpu MHz		: 848.383

00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] 
System Controller (rev 25)
	Flags: bus master, medium devsel, latency 64
	Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Memory at fc9ff000 (32-bit, prefetchable) [size=4K]
	I/O ports at ffe4 [disabled] [size=4]
	Capabilities: <available only to root>

00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP 
Bridge (rev 01) (prog-if 00 [Normal decode])
	Flags: bus master, 66Mhz, medium devsel, latency 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fca00000-feafffff
	Prefetchable memory behind bridge: e4800000-f48fffff

00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA 
(rev 01)
	Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE 
(rev 03) (prog-if 8a [Master SecP PriP])
	Flags: bus master, medium devsel, latency 64
	I/O ports at cb00 [size=16]

00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
	Flags: medium devsel

00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB 
(rev 06) (prog-if 10 [OHCI])
	Flags: bus master, medium devsel, latency 16, IRQ 10
	Memory at febfe000 (32-bit, non-prefetchable) [size=4K]

00:0f.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)
	Subsystem: Adaptec: Unknown device 3869
	Flags: bus master, medium devsel, latency 64, IRQ 11
	I/O ports at f800 [disabled] [size=256]
	Memory at febff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at febe0000 [disabled] [size=64K]
	Capabilities: <available only to root>

00:11.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation USB
	Flags: bus master, medium devsel, latency 40, IRQ 11
	Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <available only to root>

00:11.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation USB
	Flags: bus master, medium devsel, latency 40, IRQ 5
	Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <available only to root>

00:11.2 USB Controller: NEC Corporation: Unknown device 00e0 (rev 01) 
(prog-if 20)
	Subsystem: NEC Corporation: Unknown device 00e0
	Flags: bus master, medium devsel, latency 64, IRQ 9
	Memory at febfdf00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <available only to root>

00:12.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 
(rev 07)
	Subsystem: Creative Labs CT4831 SBLive! Value
	Flags: bus master, medium devsel, latency 64, IRQ 5
	I/O ports at ff80 [size=32]
	Capabilities: <available only to root>

00:12.1 Input device controller: Creative Labs SB Live! (rev 07)
	Subsystem: Creative Labs Gameport Joystick
	Flags: bus master, medium devsel, latency 64
	I/O ports at fff0 [size=8]
	Capabilities: <available only to root>

00:13.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] 
(rev 78)
	Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
	Flags: bus master, medium devsel, latency 64, IRQ 9
	I/O ports at fc00 [size=128]
	Memory at febfde80 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at febc0000 [disabled] [size=128K]
	Capabilities: <available only to root>

00:14.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 03)
	Flags: medium devsel
	Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
	I/O window 0: 00000000-00000003 [disabled]
	I/O window 1: 00000000-00000003 [disabled]
	16-bit legacy interface ports at 0001

00:14.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 03)
	Flags: medium devsel
	Memory at 10001000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=0
	I/O window 0: 00000000-00000003 [disabled]
	I/O window 1: 00000000-00000003 [disabled]
	16-bit legacy interface ports at 0001