linux-fbdev-devel

[Linux-fbdev-devel] atyfb has always failed here

[Felipe C. <al5...@ma...>]

Hi,

Since I have tryied to use atyfb (2.4.x) I've never been able to make it
work. Even on the new 2.5 and the dj4 one it fails.

This is my card:
ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 100)

I don't know if it's supported but at least I know someone that has the
same card and it doesn't work neither.

Should I stop waiting for atyfb to work on my chip?

-- 
Felipe Contreras

Re: [Linux-fbdev-devel] atyfb has always failed here

[Allan S. J. <sno...@on...>]

On Thursday 24 January 2002 07:28, Felipe Contreras wrote:
> Hi,
>
> Since I have tryied to use atyfb (2.4.x) I've never been able to make it
> work. Even on the new 2.5 and the dj4 one it fails.
>
> This is my card:
> ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 100)
>
> I don't know if it's supported but at least I know someone that has the
> same card and it doesn't work neither.
>
> Should I stop waiting for atyfb to work on my chip?

I can confirm I have same problem with (rev 64). Although it works on one of 
my collegues _almost_ identical slightly older Thinkpad.

Re: [Linux-fbdev-devel] atyfb has always failed here

[James S. <jsi...@tr...>]

> Since I have tryied to use atyfb (2.4.x) I've never been able to make it
> work. Even on the new 2.5 and the dj4 one it fails.
> 
> This is my card:
> ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 100)

Can you use vga text and run lspci then post the results. You might be
using the framebuffer driver. 

Re: [Linux-fbdev-devel] atyfb has always failed here

[Felipe C. <al5...@ma...>]

It seems the message was lost, so I'm resending:

On Thu, Jan 24, 2002 at 11:06:58AM -0800, James Simmons wrote:
> 
> > Since I have tryied to use atyfb (2.4.x) I've never been able to make it
> > work. Even on the new 2.5 and the dj4 one it fails.
> > 
> > This is my card:
> > ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 100)
> 
> Can you use vga text and run lspci then post the results. You might be
> using the framebuffer driver.

I'm not, I have it as a moudule, that string was obtained from cat
/proc/pci, as I don't have lspci.

Bus  1, device   0, function  0:
        VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 100).
        IRQ 10.
        Master Capable.  Latency=66.  Min Gnt=8.
        Non-prefetchable 32 bit memory at 0xf5000000
        [0xf5ffffff].
        I/O at 0x2000 [0x20ff].
        Non-prefetchable 32 bit memory at
        0xf4100000 [0xf4100fff].

You still want me compile without atyfb.o and download lspci?

-- 
Felipe Contreras