Menu
▾
▴
linux-fbdev-devel
|
From: Sven L. <lu...@la...> - 2002-07-01 07:25:50
|
Hello, ... I have compiled a 2.5.24 kernel and added the few things needed to make the pm3fb work (basically, i had to patch Config.in and Config.help so i could enable it in the configuration process). Is there a reason why it was not enabled previously, or is it just forgetting the these two files (which probably did not patch correctly due to the Config.in and Config.help location and format change). Anyway, it works fine (well as good as with the 2.4.x kernel), there still is problem with the copying of the text console data at bootup, but apart from that everything is fine. Should i send over a patch for adding it to the Config.xxx files ? Friendly, Sven Luther |
|
From: Romain D. <do...@ir...> - 2002-07-01 07:58:07
|
Sven Luther wrote: > I have compiled a 2.5.24 kernel and added the few things needed to make > the pm3fb work (basically, i had to patch Config.in and Config.help so i > could enable it in the configuration process). Could you send me the patch please ? > Is there a reason why it was not enabled previously, or is it just > forgetting the these two files (which probably did not patch correctly > due to the Config.in and Config.help location and format change). I though the old-format drivers wouldn't work so I never bothered submitting for inclusion. > Anyway, it works fine (well as good as with the 2.4.x kernel), there > still is problem with the copying of the text console data at bootup, > but apart from that everything is fine. > > Should i send over a patch for adding it to the Config.xxx files ? Please send me the patch, I'll submit them for inclusion Thanks for the help, -- DOLBEAU Romain | I witness a time and a place that never dies, ENS Cachan / Ker Lann | still frozen in time, this darkness the only Thesard IRISA / CAPS | place that I can hide. I witness, a dream. dol...@cl...| -- Black Sabbath, 'I Witness' |
|
From: James S. <jsi...@tr...> - 2002-07-01 16:59:24
|
> > still is problem with the copying of the text console data at bootup, > > but apart from that everything is fine. > > > > Should i send over a patch for adding it to the Config.xxx files ? > > Please send me the patch, I'll submit them for inclusion Good news. I already included Config.help and Config.in entries for the PM3 driver. As a note please consider porting it over to the new fbgen api. I'm going to removal the old fbgen code soon. |
|
From: Romain D. <do...@ir...> - 2002-07-01 17:02:25
|
James Simmons wrote: > Good news. I already included Config.help and Config.in entries for the > PM3 driver. As a note please consider porting it over to the new fbgen > api. I'm going to removal the old fbgen code soon. It's on my TODO list, and has been for months. But I still can't get 2.5.x to compile, much less work, on my PPC box. So there's not much I can do ATM. -- DOLBEAU Romain | Who'd believe we'd spend more ENS Cachan / Ker Lann | Shippin' drugs and guns Thesard IRISA / CAPS | Than to educate our sons? dol...@cl... | -- Megadeth, 'Youthanasia' |
|
From: Sven L. <lu...@la...> - 2002-07-02 06:26:25
|
On Mon, Jul 01, 2002 at 09:59:16AM -0700, James Simmons wrote: > > > > still is problem with the copying of the text console data at bootup, > > > but apart from that everything is fine. > > > > > > Should i send over a patch for adding it to the Config.xxx files ? > > > > Please send me the patch, I'll submit them for inclusion > > Good news. I already included Config.help and Config.in entries for the > PM3 driver. As a note please consider porting it over to the new fbgen nice :))) > api. I'm going to removal the old fbgen code soon. how soon, and is there documentation or sample code for the changed api ? BTW, i suppose now it will be easier to implement dual head with a dual output board ? Friendly, Sven Luther > |
|
From: Romain D. <do...@ir...> - 2002-07-02 08:37:03
|
Sven Luther wrote: > > api. I'm going to removal the old fbgen code soon. > > how soon, and is there documentation or sample code for the changed api > ? According from a recent message by James Simmons on LKML: > Note I removed the old fbgen stuff so some drivers are going to > break. Well with time running out I need to push ahead. Sorry but I have > to choose. So pm3fb won't work anymore I guess (due to the ultimate brokenness of linux on PowerPC I haven't yet ported pm3fb to the new API). -- DOLBEAU Romain | Nothing is real but the way that I feel ENS Cachan / Ker Lann | And I feel like going down, down, down Thesard IRISA / CAPS | -- Rainbow, dol...@cl... | 'Self Portrait' |
|
From: Sven L. <lu...@la...> - 2002-07-02 12:31:40
|
On Tue, Jul 02, 2002 at 10:36:39AM +0200, Romain Dolbeau wrote: > Sven Luther wrote: > > > > api. I'm going to removal the old fbgen code soon. > > > > how soon, and is there documentation or sample code for the changed api > > ? > > According from a recent message by James Simmons on LKML: > > > Note I removed the old fbgen stuff so some drivers are going to > > break. Well with time running out I need to push ahead. Sorry but I have > > to choose. > > So pm3fb won't work anymore I guess (due to the ultimate brokenness > of linux on PowerPC I haven't yet ported pm3fb to the new API). But it works fine right now on linus's 2.5.24, with the above sent patch. But it does need porting, i guess. Friendly, Sven Luther |
|
From: James S. <jsi...@tr...> - 2002-07-05 02:40:42
|
> So pm3fb won't work anymore I guess (due to the ultimate brokenness > of linux on PowerPC I haven't yet ported pm3fb to the new API). Have you tried the BK ppc tree for 2.5.X? Dose it work? I noticed there were some updates just a few hours ago. |
|
From: Romain D. <do...@ir...> - 2002-07-05 08:33:10
|
James Simmons wrote: > > > So pm3fb won't work anymore I guess (due to the ultimate brokenness > > of linux on PowerPC I haven't yet ported pm3fb to the new API). > > Have you tried the BK ppc tree for 2.5.X? Dose it work? I noticed there > were some updates just a few hours ago. My usual tree (BenH) has a 2.5 variant, locked a 2.5.8pre3... I'm willing to try another one, but I'm still disapointed that regular Linus kernel can't even compile main.c on PPC. Just tried: all rsync access seems locked on 2.5.8pre3, and of course debian doesn't have bitkeeper in packages. And bitkeeper download site isn't really user-friendly (guess the "let's register yourself before download" attitude explain why it's not in debian, and not on my system either).Xorsis (ppckernel.org) has nothing beyond 2.4 ATM. Well, I'm still waiting for an accessible, ppc-usable 2.5.[something big enough] before I can port pm3fb. -- DOLBEAU Romain | Who'd believe we'd spend more ENS Cachan / Ker Lann | Shippin' drugs and guns Thesard IRISA / CAPS | Than to educate our sons? dol...@cl... | -- Megadeth, 'Youthanasia' |
|
From: Michel <mi...@da...> - 2002-08-04 13:00:34
|
On Fri, 2002-07-05 at 10:32, Romain Dolbeau wrote: > Well, I'm still waiting for an accessible, ppc-usable > 2.5.[something big enough] before I can port pm3fb. For accessibility, try rsync source.mvista.com::linuxppc-2.5 . Don't know about usability yet though. :) --=20 Earthling Michel D=E4nzer (MrCooper)/ Debian GNU/Linux (powerpc) developer XFree86 and DRI project member / CS student, Free Software enthusiast |
|
From: Romain D. <do...@ir...> - 2002-08-05 11:17:07
|
Michel D=E4nzer wrote: >=20 > On Fri, 2002-07-05 at 10:32, Romain Dolbeau wrote: >=20 > > Well, I'm still waiting for an accessible, ppc-usable > > 2.5.[something big enough] before I can port pm3fb. >=20 > For accessibility, try rsync source.mvista.com::linuxppc-2.5 . It's the one I tried, last time I checked (around 2.5.23), it was still in 2.5.8pre3 (i.e., w/o the new framebuffer layer). Thanks for the tip anyway, I'll try it again, just in case. --=20 DOLBEAU Romain | For a hill, men would kill, =20 ENS Cachan / Ker Lann | Why ? They do not know. =20 Thesard IRISA / CAPS | -- Metallica, =20 dol...@cl... | 'For Whom The Bell Tolls' |
|
From: Michel <mi...@da...> - 2002-08-05 11:22:38
|
On Mon, 2002-08-05 at 13:16, Romain Dolbeau wrote: > Michel D=E4nzer wrote: > >=20 > > On Fri, 2002-07-05 at 10:32, Romain Dolbeau wrote: > >=20 > > > Well, I'm still waiting for an accessible, ppc-usable > > > 2.5.[something big enough] before I can port pm3fb. > >=20 > > For accessibility, try rsync source.mvista.com::linuxppc-2.5 . >=20 > It's the one I tried, last time I checked (around 2.5.23), > it was still in 2.5.8pre3 (i.e., w/o the new framebuffer layer). It's at 2.5.30 now at least. --=20 Earthling Michel D=E4nzer (MrCooper)/ Debian GNU/Linux (powerpc) developer XFree86 and DRI project member / CS student, Free Software enthusiast |
|
From: Romain D. <do...@ir...> - 2002-08-06 08:57:53
|
Michel D=E4nzer wrote: > It's at 2.5.30 now at least. Thanks, but this doesn't help: beside the not really needed serial ports and floppy drive, the SCSI drivers also don't compile. And this box has no IDE channel. It's better than it once was, but it still 2.4.x only for me :-( Thanks for the help, --=20 DOLBEAU Romain | I tell you to enjoy life, =20 ENS Cachan / Ker Lann | I wish I could =20 Thesard IRISA / CAPS | but it's too late. =20 dol...@cl... | -- Black Sabbath, 'Paranoid' |
|
From: Romain D. <do...@ir...> - 2002-08-06 10:00:25
|
Romain Dolbeau wrote:
> Thanks, but this doesn't help: beside the not really
> needed serial ports and floppy drive, the SCSI
> drivers also don't compile. And this box has no
> IDE channel.
Good news: Only 53c94 doesn't compile, but MESH is OK,
and linux is on the internal bus (w/ MESH)
Bad news: arch/ppc/kernel/process.c doesn't compile.
So the conlusion stand: 2.4.x only for my box ATM
--
DOLBEAU Romain | I witness a time and a place that never dies,
ENS Cachan / Ker Lann | still frozen in time, this darkness the only
Thesard IRISA / CAPS | place that I can hide. I witness, a dream.
dol...@cl...| -- Black Sabbath, 'I Witness'
|
|
From: James S. <jsi...@tr...> - 2002-07-05 02:38:38
|
> > api. I'm going to removal the old fbgen code soon. > > how soon, and is there documentation or sample code for the changed api > ? In the next few days. Take a look at several drivers that have been ported over. Plus take a look at skeletonfb.c. It details alot. If you have furthur questions feel free to ask. > BTW, i suppose now it will be easier to implement dual head with a dual > output board ? Yes :-) ON struct fb_info for each framebuffer and a struct xxx_par for the hardware. In this case your xxx_par struct would be shared betweem each struct fb_info. > > Friendly, > > Sven Luther > > > |
|
From: Sven L. <lu...@la...> - 2002-07-05 05:51:22
|
On Thu, Jul 04, 2002 at 07:38:27PM -0700, James Simmons wrote: > > > > api. I'm going to removal the old fbgen code soon. > > > > how soon, and is there documentation or sample code for the changed api > > ? > > In the next few days. Take a look at several drivers that have been ported > over. Plus take a look at skeletonfb.c. It details alot. If you have > furthur questions feel free to ask. Well, the only problem is that i don't have much time :((( But i will have a look at it. do i need to get the bk tree, or can i start working with the 2.5.24 linus tree i now have ? Maybe there is a patch available somewhere ? > > BTW, i suppose now it will be easier to implement dual head with a dual > > output board ? > > Yes :-) ON struct fb_info for each framebuffer and a struct xxx_par for > the hardware. In this case your xxx_par struct would be shared betweem > each struct fb_info. :))) Friendly, Sven Luther |
|
From: James S. <jsi...@tr...> - 2002-07-05 22:44:23
|
> > In the next few days. Take a look at several drivers that have been ported > > over. Plus take a look at skeletonfb.c. It details alot. If you have > > furthur questions feel free to ask. > > Well, the only problem is that i don't have much time :((( > > But i will have a look at it. > > do i need to get the bk tree, or can i start working with the 2.5.24 > linus tree i now have ? You can use Linus tree now. |
|
From: Sven L. <lu...@la...> - 2002-07-02 06:23:50
Attachments:
pm3fb.diff
|
On Mon, Jul 01, 2002 at 09:57:49AM +0200, Romain Dolbeau wrote: > Sven Luther wrote: > > > I have compiled a 2.5.24 kernel and added the few things needed to make > > the pm3fb work (basically, i had to patch Config.in and Config.help so i > > could enable it in the configuration process). > > Could you send me the patch please ? Ok, but they are triviel (attached here ...) > > Is there a reason why it was not enabled previously, or is it just > > forgetting the these two files (which probably did not patch correctly > > due to the Config.in and Config.help location and format change). > > I though the old-format drivers wouldn't work so I never bothered > submitting for inclusion. :))) > > Anyway, it works fine (well as good as with the 2.4.x kernel), there > > still is problem with the copying of the text console data at bootup, > > but apart from that everything is fine. > > > > Should i send over a patch for adding it to the Config.xxx files ? > > Please send me the patch, I'll submit them for inclusion Ok, ... Friendly, Sven Luther |
Thanks for helping keep SourceForge clean.
X