|
From: Paul S. <psh...@st...> - 2001-11-08 13:11:23
|
At 17:11 07/11/01 +0100, you wrote: > >1 i am download new redhat 7.2 distribution with kernel 2.4 >2. i am install on new system with asus maiboard, ATA100, Vanta, 2 x >D-link 220 ethernet cards with AUI, BNC, UTP support, also i have HUB with >AUI, BNC, UTP [snip] >after changing in /etc/grub.conf > >kernel /boot/bzImage etc ether=3,0x300,eth0 ether=4,0x320,eth1 >it is look like ok both of cards are one TCP/IP network live I don't know the D-Link 220 or grub, but does this mean the cards are using IRQ 3 and 4? This is a very bad idea since IRQ4 is used by the first serial port and IRQ3 by the second serial port. This may result in some very strange behaviour. On most PCs, IRQs 5 and 10 are free. HTH, Paul Paul Sherwin Consulting 22 Monmouth Road, Oxford OX1 4TD, UK Phone +44 (0)1865 721438 http://www.psherwin.strayduck.com Mobile +44 (0)7931 578334 mailto:psh...@st... |
