Re: [Linux-decnet-user] Applying Kernel patch
Brought to you by:
chrissie_c,
ph3-der-loewe
Menu
▾
▴
Re: [Linux-decnet-user] Applying Kernel patch
|
From: Akihiko T. <TAN...@sp...> - 2000-08-19 16:25:49
|
I skipped "make clean" but I still got the same error:
make: *** No rule to make target 'bzImage'. Stop.
Do I need to upgrade a kernel 2.2.16 before applying DECNET kernel patch 2.2.16?
Akihiko
---------- Original Message ----------------------------------
From: ecc <ec...@cy...>
Date: Thu, 17 Aug 2000 07:49:04 -0700
>Here is what I do.
>
>cd/usr/src/linux
>make config
>make dep
>make bzImage
>make modules
>make modules_install
>
>I believe your problem is "make clean"..is cleaning!
>You can use make clean before make dep if you would like, but try not doing it
>before bzImage.
>
>good luck!
>Ed
>
>Akihiko Tanaka wrote:
>
>> I tried the following commands to make bzImaze:
>>
>> cd /usr/src/linux
>> make dep; make clean
>> make bzImage
>>
>> I got a make error:
>>
>> make: *** No rule to make target 'bzImage'. Stop.
>>
>> DO I need to modify Makefile? Is it in /usr/src/linux/arch/i386/boot directory?
>>
>> Akihiko
>> >-----Original Message-----
>> >From: Akihiko Tanaka [mailto:TAN...@sp...]
>> >Sent: Tuesday, 15 August 2000 9:04
>> >To: Patrick Caulfield
>> >Cc: lin...@li...; ak...@co...
>> >Subject: Re: [Linux-decnet-user] Applying Kernel patch
>> >
>> >
>> >I modified proc_fs.h and executed "make zImage" as shown in the kernel
>> >installation guide. It complied and linked. However, the following errors
>> >were displayed:
>> >
>> >Root device is (3,8)
>> >Boot sector 512 bytes.
>> >Setup is 3440 bytes.
>> >System is 619kB
>> >System is too big. Try using bzImage or modules.
>> >make[1]:***[zImage] Error 1
>> >make[1]:Leaving directory 'usr/src/linux-2.2.14/arch/i386/boot'
>> >make:***[zImage]Error 2
>> >
>> >Do I need to fix these errors? It looks zImage is created.
>> >
>> >Akihiko
>> >---------- Original Message ----------------------------------
>> >From: Patrick Caulfield <pa...@pa...>
>> >Date: Fri, 11 Aug 2000 08:27:54 +0100
>> >
>> >>On Thu, Aug 10, 2000 at 08:54:21PM -0400, Akihiko Tanaka wrote:
>> >>> I downloaded the latest patch for DECNET and tried to install on my Red
>> >Hat 6.2 Kernel 2.2.14-50 i586 machine for the first time. I follwed the
>> >Kernel Patch Installation Guide on the web. When I did
>> >>>
>> >>> patch -p1 <decnet-2_2_16.diff
>> >>>
>> >>> I got an error and created proc_fs.h.rej file. It seems that patch tried
>> >to add PROC_NET_PNP and PROC_NET_DECNET to proc_fs.h file.
>> >>>
>> >>> I went ahead to execute make zImage. But because PROC_NET_DECNET is not
>> >defined in proc_fs.h, I had a compile error from af_decnet.c.
>> >>>
>> >>> How can I correct a patch error? Do I need to start from patch and the
>> >follow the instruction again? 'Make config' asked a lot of questions. It
>> >looks like defining a lot of Environment Variables. Can I skip this and use
>> >the previously defined values?
>> >>
>> >>
>> >>That's normal for applying the 2.2.16 patch to a 2.2.14 kernel. You should
>> >>either upgrade to 2.2.16 or edit the include/proc_fs.h file as follows:
>> >>
>> >>Look for PROC_NET_LAST and add the following line just before it:
>> >>
>> >>PROC_NET_DECNET,
>> >>
>> >>Don't forget the trailing comma or it won't compile.
>> >>
>> >><whinge mode>
>> >>Considering 2.2.x is supposed to be a stable kernel I find it a little
>> >galling
>> >>that new /proc/net entries seem to turn up in almost every new release :-(
>> >></whinge mode>
>> >>
>> >>Just to confirm that, the file should look a little like this in that area:
>> >>
>> >>
>> >> PROC_NET_BRIDGE,
>> >> PROC_NET_DECNET,
>> >> PROC_NET_LAST
>> >>};
>> >>
>> >>enum scsi_directory_inos {
>> >> PROC_SCSI_SCSI = 256,
>> >> PROC_SCSI_ADVANSYS,
>> >>
>> >>
>> >>Patrick
>> >>
>> >>_______________________________________________
>> >>Linux-decnet-user mailing list
>> >>Lin...@li...
>> >>http://lists.sourceforge.net/mailman/listinfo/linux-decnet-user
>> >>
>> >
>> >_______________________________________________
>> >Linux-decnet-user mailing list
>> >Lin...@li...
>> >http://lists.sourceforge.net/mailman/listinfo/linux-decnet-user
>> >
>> >EOM
>> >
>> >NOTICE - This message contains information intended only for the use of the
>> >addressee named above. It may also be confidential and/or privileged. If
>> >you are not the intended recipient of this message you are hereby notified
>> >that you must not disseminate, copy or take any action in reliance on it.
>> >If you have received this message in error please notify pos...@bh....
>> >
>> >
>> >_______________________________________________
>> >Linux-decnet-user mailing list
>> >Lin...@li...
>> >http://lists.sourceforge.net/mailman/listinfo/linux-decnet-user
>> >
>>
>> _______________________________________________
>> Linux-decnet-user mailing list
>> Lin...@li...
>> http://lists.sourceforge.net/mailman/listinfo/linux-decnet-user
>
>
|
