linux-atm-general — General discussion of ATM networking under linux

Re: [Linux-ATM-General] atm-tools and Ubuntu 10.10

[chas w. - C. <ch...@cm...>]

nothing that i know about specifically.  what is your hardware and what
are commands are you running?

On Thu, 20 Jan 2011 11:03:59 +0000
Maestrelli Francesco <fra...@aa...> wrote:

> Are there know issues with the atm daemons and Ubuntu 10.10? When I l start them following instructions in here http://www.linuxjournal.com/article/3005 the machine freezes.
> 
> Thanks
> 
> Francesco
> 
> 
> ------------------------------------------------------------------------------
> Protect Your Site and Customers from Malware Attacks
> Learn about various malware tactics and how to avoid them. Understand 
> malware threats, the impact they can have on your business, and how you 
> can protect your company and customers by using code signing.
> http://p.sf.net/sfu/oracle-sfdevnl
> _______________________________________________
> Linux-atm-general mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linux-atm-general
> 

[Linux-ATM-General] atm-tools and Ubuntu 10.10

[Maestrelli F. <fra...@aa...>]

Are there know issues with the atm daemons and Ubuntu 10.10? When I l start them following instructions in here http://www.linuxjournal.com/article/3005 the machine freezes.

Thanks

Francesco

[Linux-ATM-General] Patch for soloscli

[Philip P. <phi...@re...>]

Parse the output of successfully sending a GET/SET.

Exit with 2 on error.  Also signal error if sequence number is wrong.

--- solos-pci-r26/soloscli/soloscli.c.orig	2011-01-07 20:33:43.000000000 -0700
+++ solos-pci-r26/soloscli/soloscli.c	2011-01-07 23:54:23.000000000 -0700
@@ -239,10 +239,13 @@ int receive_reply(char *path, char *buf)
  	if (strcmp(buf,pid) == 0) {
  /*		printf("Sequence matches.\n"); */
  		printf("%s\n",bufp);
+		if (strcmp(bufp, "OK"))
+			return 2;
  	} else {
  		printf("Sequence incorrect.\n");
  		buf[i] = '\n';
  		printf("Expected %s, buffer was:\n%s\n",pid,buf);
+		return 1;
  	}
  	return 0;
  }

Re: [Linux-ATM-General] [PATCH] Madge Ambassador ATM Adapter driver: Always release_firmware() in ucode_init() and don't leak memory.

[chas w. - C. <ch...@cm...>]

instead of duplicating the same section again and again, could you
write something like:

	errmsg = "no start record";
	goto fail;

	...

	errmsg = "record to long"
	goto fail;

	.... whatever ...

	return 0;

fail:
	release_firmware(fw)
	PRINTK(KERN_ERR, "Bad microcode data (%s)\n", errmsg);
	return -EINVAL;
}

On Thu, 6 Jan 2011 22:06:37 +0100 (CET)
Jesper Juhl <jj...@ch...> wrote:

> 
> Failure to call release_firmware() will result in memory leak in 
> drivers/atm/ambassador.c::ucode_init().
> This patch makes sure we always call release_firmware() when needed, thus 
> removing the leak(s).
> 
> Signed-off-by: Jesper Juhl <jj...@ch...>
> ---
>  ambassador.c |    5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
>   Compile tested only since I have no way to actually test this.
> 
> diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
> index ffe9b65..ab56539 100644
> --- a/drivers/atm/ambassador.c
> +++ b/drivers/atm/ambassador.c
> @@ -1927,7 +1927,7 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
>    unsigned long start_address;no start record
>    const struct ihex_binrec *rec;
>    int res;
> -  
> +
>    res = request_ihex_firmware(&fw, "atmsar11.fw", &dev->pci_dev->dev);
>    if (res) {
>      PRINTK (KERN_ERR, "Cannot load microcode data");
> @@ -1937,6 +1937,7 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
>    /* First record contains just the start address */
>    rec = (const struct ihex_binrec *)fw->data;
>    if (be16_to_cpu(rec->len) != sizeof(__be32) || be32_to_cpu(rec->addr)) {
> +    release_firmware(fw);
>      PRINTK (KERN_ERR, "Bad microcode data (no start record)");
>      return -EINVAL;
>    }
> @@ -1950,10 +1951,12 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
>      PRINTD (DBG_LOAD, "starting region (%x, %u)", be32_to_cpu(rec->addr),
>  	    be16_to_cpu(rec->len));
>      if (be16_to_cpu(rec->len) > 4 * MAX_TRANSFER_DATA) {
> +	    release_firmware(fw);
>  	    PRINTK (KERN_ERR, "Bad microcode data (record too long)");
>  	    return -EINVAL;
>      }
>      if (be16_to_cpu(rec->len) & 3) {
> +	    release_firmware(fw);
>  	    PRINTK (KERN_ERR, "Bad microcode data (odd number of bytes)");
>  	    return -EINVAL;
>      }
> 
> 
> 

Re: [Linux-ATM-General] [PATCH 1/1] Use VPI.VCI notation consistently in solos-pci driver

[Philip P. <phi...@re...>]

Is anyone else still building solos drivers from sourceforge, or is everyone expected to be using the ones in-tree at this point?

Because a few projects out there are still building from 2.6.27.x and want to build the drivers from what's on sourceforge, but if that's no longer maintained then they might have to improvise.

Maybe it's time to yank the tarball on sourceforge as a way of telling people to use the in-tree sources, and if that's not an option, to light a fire under them to bump their kernel versions...


On 12/26/10 12:02 PM, Philip Prindeville wrote:
> Hang on, I just looked upstream in git.kernel.org and realized that there are a lot of fixes there that aren't in the openadsl tree...
>
> It would be nice to update openadsl and release a solos-pci driver 0.12 with these updates.
>

Re: [Linux-ATM-General] Due for a new release?

[Guy E. <gu...@tr...>]

Hi Philip,

I'm just working on a new manual, and trying to build a full list of 
usefull ADSL parameters.
If this trick works let me know and I'll include it in the manual.

You could try turning off ADSL2/2+ support, that might speedup training.
Try setting these parameters in this order...

ActivateLine Abort
BisACapability Disable {disable Annex A ADSL2 and ADSL2+}
BisMCapability Disable {disable Annex M ADSL2 and ADSL2+}
ActivateLine Start

To set ADSL parameters use soloscli...

<snip>
Included in the driver tarball on SourceForge is a simple CLI utility to 
allow access to the ADSL
parameters for each port. Usage...
$soloscli -g Port Parameter
$soloscli -s Port Parameter Value
Notes :
g = get
s = set
Port is the ADSL port number with a value of 0 or 1
</snip>

Cheers,

  - Guy.




On 29/12/2010 7:18 AM, Philip Prindeville wrote:
> On 12/28/10 11:20 AM, Philip Prindeville wrote:
>    
>> On 12/28/10 9:31 AM, Philip Prindeville wrote:
>>      
>>> On 12/28/10 8:40 AM, chas williams - CONTRACTOR wrote:
>>>        
>>>> i have released 2.5.2
>>>>          
>>> Awesome.  B

>>> uilding now.
>>>
>>>        
>> Well, with:
>>
>> astlinux, unmodified other than bumping linux-atm to 2.5.2
>> keeping the experimental firmware on the solos PCI card
>> and using the solos-0.11 download with the same patches as before
>>
>> it fails to train up.
>>
>> ...
>> NET: Registered protocol family 8
>> NET: Registered protocol family 20
>> Solos PCI Driver Version 0.11 svn-25
>> solos 0000:00:0c.0: Solos FPGA Version 0.03 svn-38
>> solos 0000:00:0c.0: Registered ATM device 0
>> solos 0000:00:0c.0: Registered ATM device 1
>> solos 0000:00:0c.0: Port 0: HandShake
>> Bridge firewalling registered
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>> device eth0 entered promiscuous mode
>> eth1: link down
>> device eth1 entered promiscuous mode
>> Bringing up br1 as 192.168.0.2
>> br1: topology change detected, propagating
>> br1: port 1(eth0) entering forwarding state
>> Sleeping for 30 seconds before I bring up ppp0...
>> Attempting to bring up PPPoA on atm0
>> This could take some time...
>> PPP generic driver version 2.4.2
>> NET: Registered protocol family 24
>> Starting ppp.............................. timeout!
>> Pppd timed out waiting for negotiation!
>>
>>
>> not sure why this would fail.  I'm using PPPoA.  From dmesg:
>>
>> Device: 0 Vpi: 0 Vci: 32
>> ip_tables: (C) 2000-2006 Netfilter Core Team
>> nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>> solos 0000:00:0c.0: Port 1: Idle
>> solos 0000:00:0c.0: Port 1: HandShake
>> Device: 0 Vpi: 0 Vci: 32
>> Device: 0 Vpi: 0 Vci: 32
>> solos 0000:00:0c.0: Port 1: Idle
>> solos 0000:00:0c.0: Port 0: Idle
>> solos 0000:00:0c.0: Port 1: HandShake
>> solos 0000:00:0c.0: Port 0: HandShake
>> Device: 0 Vpi: 0 Vci: 32
>> solos 0000:00:0c.0: Port 0: Training
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Port 0: Showtime @1536/896 kb/s, SNR 29.5 dB, Attn 27.5 dB
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>> Device: 0 Vpi: 0 Vci: 32
>>
>>
>> If I kill and restart pppd it works.
>>
>>      
>
> Not sure what might have changed, but the link is taking longer to come up than before.
>
> Would be nice to be able to limit the profile (Annex A/T1.413) that it tries to train up as, but that's not an option.
>
> If I bump the "sleep 30" to "sleep 90" then it works.
>
> -Philip
>
>
> ------------------------------------------------------------------------------
> Learn how Oracle Real Application Clusters (RAC) One Node allows customers
> to consolidate database storage, standardize their database environment, and,
> should the need arise, upgrade to a full multi-node Oracle RAC database
> without downtime or disruption
> http://p.sf.net/sfu/oracle-sfdevnl
> _______________________________________________
> Linux-atm-general mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linux-atm-general
>
>    


-- 
Guy Ellis
gu...@tr...
http://www.traverse.com.au
Skype: guy.ellis1
Tel:  +613 9386 4430
Fax:  +613 9386 4435

Re: [Linux-ATM-General] Due for a new release?

[Guy E. <gu...@tr...>]

What makes you think you are using ADSL2+???

<snip>
solos 0000:00:0c.0: Port 0: Showtime @1536/896 kb/s, SNR 29.5 dB, Attn 
27.5 dB
</snip>

That looks like ADSL1 to me.

To disable ADSL1 support..

ActivateLine Abort
AnnexACapability Disable
ActivateLine Start

Cheers,

  - Guy.


On 29/12/2010 8:27 AM, Philip Prindeville wrote:
> I'm using ADSL2+, just not the G.DMT stuff which is what I'm guessing 
> it tries to train up with first.
>
>
> On 12/28/10 1:21 PM, Guy Ellis wrote:
>> Hi Philip,
>>
>> I'm just working on a new manual, and trying to build a full list of 
>> usefull ADSL parameters.
>> If this trick works let me know and I'll include it in the manual.
>>
>> You could try turning off ADSL2/2+ support, that might speedup training.
>> Try setting these parameters in this order...
>>
>> ActivateLine Abort
>> BisACapability Disable {disable Annex A ADSL2 and ADSL2+}
>> BisMCapability Disable {disable Annex M ADSL2 and ADSL2+}
>> ActivateLine Start
>>
>> To set ADSL parameters use soloscli...
>>
>> <snip>
>> Included in the driver tarball on SourceForge is a simple CLI utility 
>> to allow access to the ADSL
>> parameters for each port. Usage...
>> $soloscli -g Port Parameter
>> $soloscli -s Port Parameter Value
>> Notes :
>> g = get
>> s = set
>> Port is the ADSL port number with a value of 0 or 1
>> </snip>
>>
>> Cheers,
>>
>>  - Guy.
>>
>>
>>
>>
>> On 29/12/2010 7:18 AM, Philip Prindeville wrote:
>>> On 12/28/10 11:20 AM, Philip Prindeville wrote:
>>>> On 12/28/10 9:31 AM, Philip Prindeville wrote:
>>>>> On 12/28/10 8:40 AM, chas williams - CONTRACTOR wrote:
>>>>>> i have released 2.5.2
>>>>> Awesome.  B
>>
>>>>> uilding now.
>>>>>
>>>> Well, with:
>>>>
>>>> astlinux, unmodified other than bumping linux-atm to 2.5.2
>>>> keeping the experimental firmware on the solos PCI card
>>>> and using the solos-0.11 download with the same patches as before
>>>>
>>>> it fails to train up.
>>>>
>>>> ...
>>>> NET: Registered protocol family 8
>>>> NET: Registered protocol family 20
>>>> Solos PCI Driver Version 0.11 svn-25
>>>> solos 0000:00:0c.0: Solos FPGA Version 0.03 svn-38
>>>> solos 0000:00:0c.0: Registered ATM device 0
>>>> solos 0000:00:0c.0: Registered ATM device 1
>>>> solos 0000:00:0c.0: Port 0: HandShake
>>>> Bridge firewalling registered
>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>>>> device eth0 entered promiscuous mode
>>>> eth1: link down
>>>> device eth1 entered promiscuous mode
>>>> Bringing up br1 as 192.168.0.2
>>>> br1: topology change detected, propagating
>>>> br1: port 1(eth0) entering forwarding state
>>>> Sleeping for 30 seconds before I bring up ppp0...
>>>> Attempting to bring up PPPoA on atm0
>>>> This could take some time...
>>>> PPP generic driver version 2.4.2
>>>> NET: Registered protocol family 24
>>>> Starting ppp.............................. timeout!
>>>> Pppd timed out waiting for negotiation!
>>>>
>>>>
>>>> not sure why this would fail.  I'm using PPPoA.  From dmesg:
>>>>
>>>> Device: 0 Vpi: 0 Vci: 32
>>>> ip_tables: (C) 2000-2006 Netfilter Core Team
>>>> nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>>>> solos 0000:00:0c.0: Port 1: Idle
>>>> solos 0000:00:0c.0: Port 1: HandShake
>>>> Device: 0 Vpi: 0 Vci: 32
>>>> Device: 0 Vpi: 0 Vci: 32
>>>> solos 0000:00:0c.0: Port 1: Idle
>>>> solos 0000:00:0c.0: Port 0: Idle
>>>> solos 0000:00:0c.0: Port 1: HandShake
>>>> solos 0000:00:0c.0: Port 0: HandShake
>>>> Device: 0 Vpi: 0 Vci: 32
>>>> solos 0000:00:0c.0: Port 0: Training
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Port 0: Showtime @1536/896 kb/s, SNR 29.5 dB, 
>>>> Attn 27.5 dB
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>>> Device: 0 Vpi: 0 Vci: 32
>>>>
>>>>
>>>> If I kill and restart pppd it works.
>>>>
>>>
>>> Not sure what might have changed, but the link is taking longer to 
>>> come up than before.
>>>
>>> Would be nice to be able to limit the profile (Annex A/T1.413) that 
>>> it tries to train up as, but that's not an option.
>>>
>>> If I bump the "sleep 30" to "sleep 90" then it works.
>>>
>>> -Philip
>
>


-- 
Guy Ellis
gu...@tr...
http://www.traverse.com.au
Skype: guy.ellis1
Tel:  +613 9386 4430
Fax:  +613 9386 4435

Re: [Linux-ATM-General] Due for a new release?

[Philip P. <phi...@re...>]

I'm using ADSL2+, just not the G.DMT stuff which is what I'm guessing it tries to train up with first.


On 12/28/10 1:21 PM, Guy Ellis wrote:
> Hi Philip,
>
> I'm just working on a new manual, and trying to build a full list of usefull ADSL parameters.
> If this trick works let me know and I'll include it in the manual.
>
> You could try turning off ADSL2/2+ support, that might speedup training.
> Try setting these parameters in this order...
>
> ActivateLine Abort
> BisACapability Disable {disable Annex A ADSL2 and ADSL2+}
> BisMCapability Disable {disable Annex M ADSL2 and ADSL2+}
> ActivateLine Start
>
> To set ADSL parameters use soloscli...
>
> <snip>
> Included in the driver tarball on SourceForge is a simple CLI utility to allow access to the ADSL
> parameters for each port. Usage...
> $soloscli -g Port Parameter
> $soloscli -s Port Parameter Value
> Notes :
> g = get
> s = set
> Port is the ADSL port number with a value of 0 or 1
> </snip>
>
> Cheers,
>
>  - Guy.
>
>
>
>
> On 29/12/2010 7:18 AM, Philip Prindeville wrote:
>> On 12/28/10 11:20 AM, Philip Prindeville wrote:
>>> On 12/28/10 9:31 AM, Philip Prindeville wrote:
>>>> On 12/28/10 8:40 AM, chas williams - CONTRACTOR wrote:
>>>>> i have released 2.5.2
>>>> Awesome.  B
>
>>>> uilding now.
>>>>
>>> Well, with:
>>>
>>> astlinux, unmodified other than bumping linux-atm to 2.5.2
>>> keeping the experimental firmware on the solos PCI card
>>> and using the solos-0.11 download with the same patches as before
>>>
>>> it fails to train up.
>>>
>>> ...
>>> NET: Registered protocol family 8
>>> NET: Registered protocol family 20
>>> Solos PCI Driver Version 0.11 svn-25
>>> solos 0000:00:0c.0: Solos FPGA Version 0.03 svn-38
>>> solos 0000:00:0c.0: Registered ATM device 0
>>> solos 0000:00:0c.0: Registered ATM device 1
>>> solos 0000:00:0c.0: Port 0: HandShake
>>> Bridge firewalling registered
>>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>>> device eth0 entered promiscuous mode
>>> eth1: link down
>>> device eth1 entered promiscuous mode
>>> Bringing up br1 as 192.168.0.2
>>> br1: topology change detected, propagating
>>> br1: port 1(eth0) entering forwarding state
>>> Sleeping for 30 seconds before I bring up ppp0...
>>> Attempting to bring up PPPoA on atm0
>>> This could take some time...
>>> PPP generic driver version 2.4.2
>>> NET: Registered protocol family 24
>>> Starting ppp.............................. timeout!
>>> Pppd timed out waiting for negotiation!
>>>
>>>
>>> not sure why this would fail.  I'm using PPPoA.  From dmesg:
>>>
>>> Device: 0 Vpi: 0 Vci: 32
>>> ip_tables: (C) 2000-2006 Netfilter Core Team
>>> nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>>> solos 0000:00:0c.0: Port 1: Idle
>>> solos 0000:00:0c.0: Port 1: HandShake
>>> Device: 0 Vpi: 0 Vci: 32
>>> Device: 0 Vpi: 0 Vci: 32
>>> solos 0000:00:0c.0: Port 1: Idle
>>> solos 0000:00:0c.0: Port 0: Idle
>>> solos 0000:00:0c.0: Port 1: HandShake
>>> solos 0000:00:0c.0: Port 0: HandShake
>>> Device: 0 Vpi: 0 Vci: 32
>>> solos 0000:00:0c.0: Port 0: Training
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Port 0: Showtime @1536/896 kb/s, SNR 29.5 dB, Attn 27.5 dB
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
>>> Device: 0 Vpi: 0 Vci: 32
>>>
>>>
>>> If I kill and restart pppd it works.
>>>
>>
>> Not sure what might have changed, but the link is taking longer to come up than before.
>>
>> Would be nice to be able to limit the profile (Annex A/T1.413) that it tries to train up as, but that's not an option.
>>
>> If I bump the "sleep 30" to "sleep 90" then it works.
>>
>> -Philip

Re: [Linux-ATM-General] Due for a new release?

[Philip P. <phi...@re...>]

On 12/28/10 11:20 AM, Philip Prindeville wrote:
> On 12/28/10 9:31 AM, Philip Prindeville wrote:
>> On 12/28/10 8:40 AM, chas williams - CONTRACTOR wrote:
>>> i have released 2.5.2
>> Awesome.  Building now.
>>
> Well, with:
>
> astlinux, unmodified other than bumping linux-atm to 2.5.2
> keeping the experimental firmware on the solos PCI card
> and using the solos-0.11 download with the same patches as before
>
> it fails to train up.
>
> ...
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> Solos PCI Driver Version 0.11 svn-25
> solos 0000:00:0c.0: Solos FPGA Version 0.03 svn-38
> solos 0000:00:0c.0: Registered ATM device 0
> solos 0000:00:0c.0: Registered ATM device 1
> solos 0000:00:0c.0: Port 0: HandShake
> Bridge firewalling registered
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> device eth0 entered promiscuous mode
> eth1: link down
> device eth1 entered promiscuous mode
> Bringing up br1 as 192.168.0.2
> br1: topology change detected, propagating
> br1: port 1(eth0) entering forwarding state
> Sleeping for 30 seconds before I bring up ppp0...
> Attempting to bring up PPPoA on atm0
> This could take some time...
> PPP generic driver version 2.4.2
> NET: Registered protocol family 24
> Starting ppp.............................. timeout!
> Pppd timed out waiting for negotiation!
>
>
> not sure why this would fail.  I'm using PPPoA.  From dmesg:
>
> Device: 0 Vpi: 0 Vci: 32
> ip_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
> solos 0000:00:0c.0: Port 1: Idle
> solos 0000:00:0c.0: Port 1: HandShake
> Device: 0 Vpi: 0 Vci: 32
> Device: 0 Vpi: 0 Vci: 32
> solos 0000:00:0c.0: Port 1: Idle
> solos 0000:00:0c.0: Port 0: Idle
> solos 0000:00:0c.0: Port 1: HandShake
> solos 0000:00:0c.0: Port 0: HandShake
> Device: 0 Vpi: 0 Vci: 32
> solos 0000:00:0c.0: Port 0: Training
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Port 0: Showtime @1536/896 kb/s, SNR 29.5 dB, Attn 27.5 dB
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
> Device: 0 Vpi: 0 Vci: 32
>
>
> If I kill and restart pppd it works.
>


Not sure what might have changed, but the link is taking longer to come up than before.

Would be nice to be able to limit the profile (Annex A/T1.413) that it tries to train up as, but that's not an option.

If I bump the "sleep 30" to "sleep 90" then it works.

-Philip

Re: [Linux-ATM-General] Due for a new release?

[Philip P. <phi...@re...>]

On 12/28/10 9:31 AM, Philip Prindeville wrote:
> On 12/28/10 8:40 AM, chas williams - CONTRACTOR wrote:
>> i have released 2.5.2
> Awesome.  Building now.
>

Well, with:

astlinux, unmodified other than bumping linux-atm to 2.5.2
keeping the experimental firmware on the solos PCI card
and using the solos-0.11 download with the same patches as before

it fails to train up.

...
NET: Registered protocol family 8
NET: Registered protocol family 20
Solos PCI Driver Version 0.11 svn-25
solos 0000:00:0c.0: Solos FPGA Version 0.03 svn-38
solos 0000:00:0c.0: Registered ATM device 0
solos 0000:00:0c.0: Registered ATM device 1
solos 0000:00:0c.0: Port 0: HandShake
Bridge firewalling registered
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
device eth0 entered promiscuous mode
eth1: link down
device eth1 entered promiscuous mode
Bringing up br1 as 192.168.0.2
br1: topology change detected, propagating
br1: port 1(eth0) entering forwarding state
Sleeping for 30 seconds before I bring up ppp0...
Attempting to bring up PPPoA on atm0
This could take some time...
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Starting ppp.............................. timeout!
Pppd timed out waiting for negotiation!


not sure why this would fail.  I'm using PPPoA.  From dmesg:

Device: 0 Vpi: 0 Vci: 32
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
solos 0000:00:0c.0: Port 1: Idle
solos 0000:00:0c.0: Port 1: HandShake
Device: 0 Vpi: 0 Vci: 32
Device: 0 Vpi: 0 Vci: 32
solos 0000:00:0c.0: Port 1: Idle
solos 0000:00:0c.0: Port 0: Idle
solos 0000:00:0c.0: Port 1: HandShake
solos 0000:00:0c.0: Port 0: HandShake
Device: 0 Vpi: 0 Vci: 32
solos 0000:00:0c.0: Port 0: Training
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Port 0: Showtime @1536/896 kb/s, SNR 29.5 dB, Attn 27.5 dB
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
solos 0000:00:0c.0: Received packet for unknown VPI.VCI 0.32 on port 0
Device: 0 Vpi: 0 Vci: 32


If I kill and restart pppd it works.

Re: [Linux-ATM-General] Due for a new release?

[Philip P. <phi...@re...>]

On 12/28/10 8:40 AM, chas williams - CONTRACTOR wrote:
> i have released 2.5.2

Awesome.  Building now.

Re: [Linux-ATM-General] Due for a new release?

[chas w. - C. <ch...@cm...>]

i have released 2.5.2

Re: [Linux-ATM-General] [PATCH 1/1] Use VPI.VCI notation consistently in solos-pci driver

[Philip P. <phi...@re...>]

Nix.

My sed script mangled the paths, and after doing a quick check on git.kernel.org I see this one has already been applied... it just hasn't made it back downstream into the openadsl project on SourceForge.


On 12/26/10 11:09 AM, Philip Prindeville wrote:
> Use VPI.VCI notation consistently.
>
> Signed-of-by: Philip Prindeville<ph...@re...>
> ---
>
> --- a/drivers/atm/solos-pci-0.11/solos-pci.c    2010-12-24 01:07:09.000000000 -0700
> +++ b/drivers/atm/solos-pci-0.11/solos-pci.c    2010-12-24 14:18:45.000000000 -0700
> @@ -734,8 +734,8 @@ void solos_bh(unsigned long card_arg)
>                             le16_to_cpu(header->vci));
>                  if (!vcc) {
>                      if (net_ratelimit())
> -                        dev_warn(&card->dev->dev, "Received packet for unknown VCI.VPI %d.%d on port %d\n",
> -                             le16_to_cpu(header->vci), le16_to_cpu(header->vpi),
> +                        dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
> +                             le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
>                               port);
>                      continue;
>                  }
>
>

Re: [Linux-ATM-General] [PATCH 1/1] Use VPI.VCI notation consistently in solos-pci driver

[Philip P. <phi...@re...>]

Hang on, I just looked upstream in git.kernel.org and realized that there are a lot of fixes there that aren't in the openadsl tree...

It would be nice to update openadsl and release a solos-pci driver 0.12 with these updates.



On 12/26/10 11:09 AM, Philip Prindeville wrote:
> Use VPI.VCI notation consistently.
>
> Signed-of-by: Philip Prindeville<ph...@re...>
> ---
>
> --- a/drivers/atm/solos-pci-0.11/solos-pci.c	2010-12-24 01:07:09.000000000 -0700
> +++ b/drivers/atm/solos-pci-0.11/solos-pci.c	2010-12-24 14:18:45.000000000 -0700
> @@ -734,8 +734,8 @@ void solos_bh(unsigned long card_arg)
>    					       le16_to_cpu(header->vci));
>    				if (!vcc) {
>    					if (net_ratelimit())
> -						dev_warn(&card->dev->dev, "Received packet for unknown VCI.VPI %d.%d on port %d\n",
> -							 le16_to_cpu(header->vci), le16_to_cpu(header->vpi),
> +						dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
> +							 le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
>    							 port);
>    					continue;
>    				}
>

Re: [Linux-ATM-General] Fwd: Re: [PATCH] pppoatm carrier status

[Philip P. <phi...@re...>]

On 12/26/10 2:27 AM, Karl Hiramoto wrote:
> What kernel version are these logs from?   For what it's worth, i tried these patches months ago with adumy and atmtcp, and they seemed to work.
>
> With the logs you should check the "ip link" status.  to verify if the carrier flag changes.
>
> -- 
> Kkarl

These are from 2.6.27.49.  If they're supposed to indicate against "ppp0", I'm not seeing that happen.

And there is no 'native' net_device that they would indicate on (like 'atm0').

[Linux-ATM-General] [PATCH 1/1] Use VPI.VCI notation consistently in solos-pci driver

[Philip P. <phi...@re...>]

Use VPI.VCI notation consistently.

Signed-of-by: Philip Prindeville<ph...@re...>
---

--- a/drivers/atm/solos-pci-0.11/solos-pci.c	2010-12-24 01:07:09.000000000 -0700
+++ b/drivers/atm/solos-pci-0.11/solos-pci.c	2010-12-24 14:18:45.000000000 -0700
@@ -734,8 +734,8 @@ void solos_bh(unsigned long card_arg)
  					       le16_to_cpu(header->vci));
  				if (!vcc) {
  					if (net_ratelimit())
-						dev_warn(&card->dev->dev, "Received packet for unknown VCI.VPI %d.%d on port %d\n",
-							 le16_to_cpu(header->vci), le16_to_cpu(header->vpi),
+						dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
+							 le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
  							 port);
  					continue;
  				}

Re: [Linux-ATM-General] Fwd: Re: [PATCH] pppoatm carrier status

[Karl H. <ka...@hi...>]

What kernel version are these logs from?   For what it's worth, i tried 
these patches months ago with adumy and atmtcp, and they seemed to work.

With the logs you should check the "ip link" status.  to verify if the 
carrier flag changes.

--
Kkarl

Re: [Linux-ATM-General] Fwd: Re: [PATCH] pppoatm carrier status

[Philip P. <phi...@re...>]

Guy & Nathan sent me new firmware, which I loaded into my Geos box.

And I built an image with Karl's carrier patch.  Here's the output:

Dec 23 22:26:17 pbx2 auth.info login[2857]: root login on 'ttyS0'
Dec 23 22:28:14 pbx2 user.info kernel: solos_bh:751 got pkt status
Dec 23 22:28:14 pbx2 user.info kernel: process_status:401 lost 0 de622000
Dec 23 22:28:14 pbx2 user.debug kernel: atm_dev_signal_change signal=0 dev=de622000 number=0 dev->signal=2
Dec 23 22:28:14 pbx2 user.debug kernel: pppoatm_dev_event:134 devent=0 dev=de622000
Dec 23 22:28:14 pbx2 user.debug kernel: pppoatm_dev_event:140 atm_vcc=df13e800 pvcc->atmvcc=df13e800
Dec 23 22:28:14 pbx2 user.debug kernel: pppoatm_dev_event:144 pppoa Carrier off
Dec 23 22:28:14 pbx2 user.info kernel: ppp_channel_carrier_off:2829 pch->ppp=df0cdbc0
Dec 23 22:28:14 pbx2 user.info kernel: ppp_channel_carrier_off:2832 dev=df13e400
Dec 23 22:28:14 pbx2 user.info kernel: solos 0000:00:0c.0: Port 0: HandShake
Dec 23 22:28:24 pbx2 user.info kernel: solos_bh:751 got pkt status
Dec 23 22:28:24 pbx2 user.info kernel: process_status:401 lost 0 de622000
Dec 23 22:28:24 pbx2 user.debug kernel: atm_dev_signal_change signal=0 dev=de622000 number=0 dev->signal=0
Dec 23 22:28:24 pbx2 user.info kernel: solos 0000:00:0c.0: Port 0: Training
Dec 23 22:28:34 pbx2 user.info kernel: solos_bh:751 got pkt status
Dec 23 22:28:34 pbx2 user.info kernel: solos 0000:00:0c.0: Port 0: Showtime @1536/896 kb/s, SNR 30.0 dB, Attn 27.5 dB
Dec 23 22:28:34 pbx2 user.info kernel: process_status:420 found 0 de622000
Dec 23 22:28:34 pbx2 user.debug kernel: atm_dev_signal_change signal=2 dev=de622000 number=0 dev->signal=0
Dec 23 22:28:34 pbx2 user.debug kernel: pppoatm_dev_event:134 devent=2 dev=de622000
Dec 23 22:28:34 pbx2 user.debug kernel: pppoatm_dev_event:140 atm_vcc=df13e800 pvcc->atmvcc=df13e800
Dec 23 22:28:34 pbx2 user.debug kernel: pppoatm_dev_event:147 pppoa Carrier on
Dec 23 22:28:34 pbx2 user.info kernel: ppp_channel_carrier_on:2812 pch->ppp=df0cdbc0
Dec 23 22:28:34 pbx2 user.info kernel: ppp_channel_carrier_on:2815 dev=df13e400
Dec 23 22:28:37 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:28:46 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:28:47 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:28:57 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:06 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:08 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:10 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:12 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:14 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:16 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:18 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:20 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:22 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:24 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:26 pbx2 daemon.info pppd[1603]: No response to 3 echo-requests
Dec 23 22:29:26 pbx2 daemon.notice pppd[1603]: Serial link appears to be disconnected.
Dec 23 22:29:26 pbx2 daemon.info pppd[1603]: Connect time 4.7 minutes.
Dec 23 22:29:26 pbx2 daemon.info pppd[1603]: Sent 252 bytes, received 252 bytes.
Dec 23 22:29:26 pbx2 daemon.debug pppd[1603]: sent [LCP TermReq id=0x2 "Peer not responding"]
Dec 23 22:29:26 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:28 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:29 pbx2 daemon.debug pppd[1603]: sent [LCP TermReq id=0x3 "Peer not responding"]
Dec 23 22:29:29 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:31 pbx2 user.warn kernel: solos 0000:00:0c.0: Received packet for unknown VCI.VPI 32.0 on port 0
Dec 23 22:29:32 pbx2 daemon.notice pppd[1603]: Connection terminated.
Dec 23 22:29:32 pbx2 daemon.notice pppd[1603]: Modem hangup
Dec 23 22:29:32 pbx2 user.debug kernel: removing ATMPPP VCC df2f6de0
Dec 23 22:30:02 pbx2 user.debug kernel: vcc_connect (vpi 0, vci 32)
Dec 23 22:30:02 pbx2 user.debug kernel: vcc_connect (TX: cl 1,bw 0-0,sdu 16386; RX: cl 1,bw 0-0,sdu 1502,AAL 5)
Dec 23 22:30:02 pbx2 user.debug kernel: VCC 0.32, AAL 5
Dec 23 22:30:02 pbx2 user.debug kernel:   TX: 1, PCR 0..0, SDU 16386
Dec 23 22:30:02 pbx2 user.debug kernel:   RX: 1, PCR 0..0, SDU 1502
Dec 23 22:30:02 pbx2 user.debug kernel: Device: 0 Vpi: 0 Vci: 32
Dec 23 22:30:02 pbx2 daemon.debug pppd[1603]: using channel 2
Dec 23 22:30:02 pbx2 daemon.info pppd[1603]: Using interface ppp0
Dec 23 22:30:02 pbx2 daemon.notice pppd[1603]: Connect: ppp0<-->  0.0.32
Dec 23 22:30:02 pbx2 daemon.debug pppd[1603]: sent [LCP ConfReq id=0x4<magic 0xbbae10a9>]
Dec 23 22:30:02 pbx2 daemon.debug pppd[1603]: rcvd [LCP ConfReq id=0x1<auth pap>  <magic 0x6be1415>]
Dec 23 22:30:02 pbx2 daemon.debug pppd[1603]: sent [LCP ConfAck id=0x1<auth pap>  <magic 0x6be1415>]
Dec 23 22:30:04 pbx2 daemon.debug pppd[1603]: rcvd [LCP ConfReq id=0x2<auth pap>  <magic 0x6be1415>]
Dec 23 22:30:04 pbx2 daemon.debug pppd[1603]: sent [LCP ConfAck id=0x2<auth pap>  <magic 0x6be1415>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: sent [LCP ConfReq id=0x4<magic 0xbbae10a9>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: rcvd [LCP ConfAck id=0x4<magic 0xbbae10a9>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: sent [LCP EchoReq id=0x0 magic=0xbbae10a9]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: sent [PAP AuthReq id=0x2 user="prp...@qw..." password="******"]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: rcvd [LCP EchoRep id=0x0 magic=0x6be1415]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: rcvd [PAP AuthAck id=0x2 ""]
Dec 23 22:30:05 pbx2 daemon.notice pppd[1603]: PAP authentication succeeded
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: sent [IPCP ConfReq id=0x4<compress VJ 0f 01>  <addr 0.0.0.0>  <ms-dns1 0.0.0.0>  <ms-dns2 0.0.0.0>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: rcvd [IPCP ConfReq id=0x1<addr 207.225.84.221>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: sent [IPCP ConfAck id=0x1<addr 207.225.84.221>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: rcvd [IPCP ConfRej id=0x4<compress VJ 0f 01>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: sent [IPCP ConfReq id=0x5<addr 0.0.0.0>  <ms-dns1 0.0.0.0>  <ms-dns2 0.0.0.0>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: rcvd [IPCP ConfNak id=0x5<addr 97.120.23.148>  <ms-dns1 205.171.3.25>  <ms-dns2 205.171.2.25>]
Dec 23 22:30:05 pbx2 daemon.debug pppd[1603]: sent [IPCP ConfReq id=0x6<addr 97.120.23.148>  <ms-dns1 205.171.3.25>  <ms-dns2 205.171.2.25>]
Dec 23 22:30:06 pbx2 daemon.debug pppd[1603]: rcvd [IPCP ConfAck id=0x6<addr 97.120.23.148>  <ms-dns1 205.171.3.25>  <ms-dns2 205.171.2.25>]
Dec 23 22:30:06 pbx2 daemon.notice pppd[1603]: local  IP address 97.120.23.148
Dec 23 22:30:06 pbx2 daemon.notice pppd[1603]: remote IP address 207.225.84.221
Dec 23 22:30:06 pbx2 daemon.notice pppd[1603]: primary   DNS address 205.171.3.25
Dec 23 22:30:06 pbx2 daemon.notice pppd[1603]: secondary DNS address 205.171.2.25
Dec 23 22:37:06 pbx2 user.info kernel: solos_bh:751 got pkt status
Dec 23 22:37:06 pbx2 user.info kernel: process_status:401 lost 1 de663a00
Dec 23 22:37:06 pbx2 user.debug kernel: atm_dev_signal_change signal=0 dev=de663a00 number=1 dev->signal=1
Dec 23 22:37:06 pbx2 user.debug kernel: pppoatm_dev_event:134 devent=0 dev=de663a00
Dec 23 22:37:06 pbx2 user.debug kernel: pppoatm_dev_event:140 atm_vcc=df36b800 pvcc->atmvcc=df36b800
Dec 23 22:37:06 pbx2 user.info kernel: solos 0000:00:0c.0: Port 1: Idle
Dec 23 22:37:16 pbx2 user.info kernel: solos_bh:751 got pkt status
Dec 23 22:37:16 pbx2 user.info kernel: process_status:401 lost 1 de663a00
Dec 23 22:37:16 pbx2 user.debug kernel: atm_dev_signal_change signal=0 dev=de663a00 number=1 dev->signal=0
Dec 23 22:37:16 pbx2 user.info kernel: solos 0000:00:0c.0: Port 1: HandShake
Dec 23 22:38:14 pbx2 auth.info /usr/sbin/sshd[2874]: Accepted publickey for root from 192.168.0.4 port 60473 ssh2
Dec 23 22:39:06 pbx2 user.info kernel: solos_bh:751 got pkt status
Dec 23 22:39:06 pbx2 user.info kernel: process_status:401 lost 1 de663a00
Dec 23 22:39:06 pbx2 user.debug kernel: atm_dev_signal_change signal=0 dev=de663a00 number=1 dev->signal=0
Dec 23 22:39:06 pbx2 user.info kernel: solos 0000:00:0c.0: Port 1: Idle
Dec 23 22:39:16 pbx2 user.info kernel: solos_bh:751 got pkt status
Dec 23 22:39:16 pbx2 user.info kernel: process_status:401 lost 1 de663a00
Dec 23 22:39:16 pbx2 user.debug kernel: atm_dev_signal_change signal=0 dev=de663a00 number=1 dev->signal=0
Dec 23 22:39:16 pbx2 user.info kernel: solos 0000:00:0c.0: Port 1: HandShake


Note that I unplugged the cable to test retrain messages, etc.

Re: [Linux-ATM-General] Due for a new release?

[Philip P. <phi...@re...>]

On 12/23/10 1:44 PM, chas williams - CONTRACTOR wrote:
> On Wed, 22 Dec 2010 16:10:53 -0800
> Philip Prindeville<phi...@re...>  wrote:
>
>> Fix attached for the first issue.
> how about this for the second issue?  instead of overriding CC and
> CFLAGS, i will override COMPILE and LINK.  this will also get rid of a
> potential issue of having to override any LDFLAGS that the cross
> environment might require for building target binaries that would break
> when building host tools.

Looks to me like it worked:

$ make linux-atm
(cd /home/philipp/kernel2/build_i586/linux-atm-V2_5_2; \
		if [ -f autotools ]; then \
			./autotools ; \
		fi ; \
		rm -rf config.cache; \
		PATH=/home/philipp/kernel2/build_i586/staging_dir/bin:$PATH \
		./configure \
		--target=i586-linux-uclibc \
		--host=i586-linux-uclibc \
		--build=x86_64-pc-linux-gnu \
		--prefix=/usr \
		--sysconfdir=/etc \
		--program-transform-name='' \
		CC_FOR_BUILD=gcc \
		CFLAGS_FOR_BUILD= \
		CC=i586-linux-uclibc-gcc \
		CFLAGS='-Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE' \
	)
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal...
Running autoconf...
Running autoheader...
Running automake...
configure.in:12: installing `./config.guess'
configure.in:12: installing `./config.sub'
configure.in:14: installing `./install-sh'
configure.in:14: installing `./missing'
src/arpd/Makefile.am: installing `./depcomp'
configure.in: installing `./ylwrap'
Finished...  Now run './configure' and 'make'...
checking build system type... x86_64-pc-linux-gnu
checking host system type... i586-pc-linux-uclibc
checking target system type... i586-pc-linux-uclibc
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for i586-linux-uclibc-strip... i586-linux-uclibc-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i586-linux-uclibc-gcc... i586-linux-uclibc-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... yes
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i586-linux-uclibc-gcc accepts -g... yes
checking for i586-linux-uclibc-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of i586-linux-uclibc-gcc... gcc3
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking for bison... bison -y
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by i586-linux-uclibc-gcc... /home/philipp/kernel2/build_i586/staging_dir/i586-linux-uclibc/bin/ld
checking if the linker (/home/philipp/kernel2/build_i586/staging_dir/i586-linux-uclibc/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /home/philipp/kernel2/build_i586/staging_dir/bin/i586-linux-uclibc-nm -B
checking the name lister (/home/philipp/kernel2/build_i586/staging_dir/bin/i586-linux-uclibc-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1966080
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /home/philipp/kernel2/build_i586/staging_dir/i586-linux-uclibc/bin/ld option to reload object files... -r
checking for i586-linux-uclibc-objdump... i586-linux-uclibc-objdump
checking how to recognize dependent libraries... pass_all
checking for i586-linux-uclibc-ar... i586-linux-uclibc-ar
checking for i586-linux-uclibc-strip... (cached) i586-linux-uclibc-strip
checking for i586-linux-uclibc-ranlib... i586-linux-uclibc-ranlib
checking command to parse /home/philipp/kernel2/build_i586/staging_dir/bin/i586-linux-uclibc-nm -B output from i586-linux-uclibc-gcc object... ok
checking how to run the C preprocessor... i586-linux-uclibc-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if i586-linux-uclibc-gcc supports -fno-rtti -fno-exceptions... no
checking for i586-linux-uclibc-gcc option to produce PIC... -fPIC -DPIC
checking if i586-linux-uclibc-gcc PIC flag -fPIC -DPIC works... yes
checking if i586-linux-uclibc-gcc static flag -static works... yes
checking if i586-linux-uclibc-gcc supports -c -o file.o... yes
checking if i586-linux-uclibc-gcc supports -c -o file.o... (cached) yes
checking whether the i586-linux-uclibc-gcc linker (/home/philipp/kernel2/build_i586/staging_dir/i586-linux-uclibc/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for perl... /usr/bin/perl
checking asm/errno.h usability... yes
checking asm/errno.h presence... yes
checking for asm/errno.h... yes
checking linux/atmsap.h usability... yes
checking linux/atmsap.h presence... yes
checking for linux/atmsap.h... yes
checking for main in -lresolv... yes
checking cc for build... checking for gcc... gcc
gcc
configure: WARNING: *** atmoamd will not be built.  Missing kernel support?
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/include/Makefile
config.status: creating src/lib/Makefile
config.status: creating src/test/Makefile
config.status: creating src/debug/Makefile
config.status: creating src/qgen/Makefile
config.status: creating src/saal/Makefile
config.status: creating src/q2931/Makefile
config.status: creating src/sigd/Makefile
config.status: creating src/maint/Makefile
config.status: creating src/arpd/Makefile
config.status: creating src/ilmid/Makefile
config.status: creating src/ilmid/asn1/Makefile
config.status: creating src/man/Makefile
config.status: creating src/led/Makefile
config.status: creating src/lane/Makefile
config.status: creating src/mpoad/Makefile
config.status: creating src/oamd/Makefile
config.status: creating src/switch/Makefile
config.status: creating src/switch/debug/Makefile
config.status: creating src/switch/tcp/Makefile
config.status: creating src/br2684/Makefile
config.status: creating src/config/Makefile
config.status: creating src/extra/Makefile
config.status: creating src/extra/linux-atm.spec
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
touch /home/philipp/kernel2/build_i586/linux-atm-V2_5_2/.configured
PATH=/home/philipp/kernel2/build_i586/staging_dir/bin:$PATH \
	make -C /home/philipp/kernel2/build_i586/linux-atm-V2_5_2
make[1]: Entering directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2'
make  all-recursive
make[2]: Entering directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2'
Making all in src
make[3]: Entering directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src'
Making all in include
make[4]: Entering directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/include'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/include'
Making all in lib
make[4]: Entering directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/lib'
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2atm.lo -MD -MP -MF .deps/text2atm.Tpo -c -o text2atm.lo text2atm.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2atm.lo -MD -MP -MF .deps/text2atm.Tpo -c text2atm.c  -fPIC -DPIC -o .libs/text2atm.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2atm.lo -MD -MP -MF .deps/text2atm.Tpo -c text2atm.c -o text2atm.o>/dev/null 2>&1
mv -f .deps/text2atm.Tpo .deps/text2atm.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT atm2text.lo -MD -MP -MF .deps/atm2text.Tpo -c -o atm2text.lo atm2text.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT atm2text.lo -MD -MP -MF .deps/atm2text.Tpo -c atm2text.c  -fPIC -DPIC -o .libs/atm2text.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT atm2text.lo -MD -MP -MF .deps/atm2text.Tpo -c atm2text.c -o atm2text.o>/dev/null 2>&1
mv -f .deps/atm2text.Tpo .deps/atm2text.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT atmequal.lo -MD -MP -MF .deps/atmequal.Tpo -c -o atmequal.lo atmequal.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT atmequal.lo -MD -MP -MF .deps/atmequal.Tpo -c atmequal.c  -fPIC -DPIC -o .libs/atmequal.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT atmequal.lo -MD -MP -MF .deps/atmequal.Tpo -c atmequal.c -o atmequal.o>/dev/null 2>&1
mv -f .deps/atmequal.Tpo .deps/atmequal.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sdu2cell.lo -MD -MP -MF .deps/sdu2cell.Tpo -c -o sdu2cell.lo sdu2cell.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sdu2cell.lo -MD -MP -MF .deps/sdu2cell.Tpo -c sdu2cell.c  -fPIC -DPIC -o .libs/sdu2cell.o
sdu2cell.c: In function 'sdu2cell':
sdu2cell.c:21: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sdu2cell.lo -MD -MP -MF .deps/sdu2cell.Tpo -c sdu2cell.c -o sdu2cell.o>/dev/null 2>&1
mv -f .deps/sdu2cell.Tpo .deps/sdu2cell.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2qos.lo -MD -MP -MF .deps/text2qos.Tpo -c -o text2qos.lo text2qos.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2qos.lo -MD -MP -MF .deps/text2qos.Tpo -c text2qos.c  -fPIC -DPIC -o .libs/text2qos.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2qos.lo -MD -MP -MF .deps/text2qos.Tpo -c text2qos.c -o text2qos.o>/dev/null 2>&1
mv -f .deps/text2qos.Tpo .deps/text2qos.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT qos2text.lo -MD -MP -MF .deps/qos2text.Tpo -c -o qos2text.lo qos2text.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT qos2text.lo -MD -MP -MF .deps/qos2text.Tpo -c qos2text.c  -fPIC -DPIC -o .libs/qos2text.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT qos2text.lo -MD -MP -MF .deps/qos2text.Tpo -c qos2text.c -o qos2text.o>/dev/null 2>&1
mv -f .deps/qos2text.Tpo .deps/qos2text.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT qosequal.lo -MD -MP -MF .deps/qosequal.Tpo -c -o qosequal.lo qosequal.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT qosequal.lo -MD -MP -MF .deps/qosequal.Tpo -c qosequal.c  -fPIC -DPIC -o .libs/qosequal.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT qosequal.lo -MD -MP -MF .deps/qosequal.Tpo -c qosequal.c -o qosequal.o>/dev/null 2>&1
mv -f .deps/qosequal.Tpo .deps/qosequal.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sap2text.lo -MD -MP -MF .deps/sap2text.Tpo -c -o sap2text.lo sap2text.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sap2text.lo -MD -MP -MF .deps/sap2text.Tpo -c sap2text.c  -fPIC -DPIC -o .libs/sap2text.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sap2text.lo -MD -MP -MF .deps/sap2text.Tpo -c sap2text.c -o sap2text.o>/dev/null 2>&1
mv -f .deps/sap2text.Tpo .deps/sap2text.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2sap.lo -MD -MP -MF .deps/text2sap.Tpo -c -o text2sap.lo text2sap.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2sap.lo -MD -MP -MF .deps/text2sap.Tpo -c text2sap.c  -fPIC -DPIC -o .libs/text2sap.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2sap.lo -MD -MP -MF .deps/text2sap.Tpo -c text2sap.c -o text2sap.o>/dev/null 2>&1
mv -f .deps/text2sap.Tpo .deps/text2sap.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sapequal.lo -MD -MP -MF .deps/sapequal.Tpo -c -o sapequal.lo sapequal.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sapequal.lo -MD -MP -MF .deps/sapequal.Tpo -c sapequal.c  -fPIC -DPIC -o .libs/sapequal.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT sapequal.lo -MD -MP -MF .deps/sapequal.Tpo -c sapequal.c -o sapequal.o>/dev/null 2>&1
mv -f .deps/sapequal.Tpo .deps/sapequal.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT misc.lo -MD -MP -MF .deps/misc.Tpo -c -o misc.lo misc.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT misc.lo -MD -MP -MF .deps/misc.Tpo -c misc.c  -fPIC -DPIC -o .libs/misc.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT misc.lo -MD -MP -MF .deps/misc.Tpo -c misc.c -o misc.o>/dev/null 2>&1
mv -f .deps/misc.Tpo .deps/misc.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT ans.lo -MD -MP -MF .deps/ans.Tpo -c -o ans.lo ans.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT ans.lo -MD -MP -MF .deps/ans.Tpo -c ans.c  -fPIC -DPIC -o .libs/ans.o
ans.c: In function 'ans':
ans.c:65: warning: pointer targets in passing argument 4 of '__dn_expand' differ in signedness
ans.c:80: warning: pointer targets in passing argument 4 of '__dn_expand' differ in signedness
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT ans.lo -MD -MP -MF .deps/ans.Tpo -c ans.c -o ans.o>/dev/null 2>&1
mv -f .deps/ans.Tpo .deps/ans.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT common.lo -MD -MP -MF .deps/common.Tpo -c -o common.lo common.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT common.lo -MD -MP -MF .deps/common.Tpo -c common.c  -fPIC -DPIC -o .libs/common.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT common.lo -MD -MP -MF .deps/common.Tpo -c common.c -o common.o>/dev/null 2>&1
mv -f .deps/common.Tpo .deps/common.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT diag.lo -MD -MP -MF .deps/diag.Tpo -c -o diag.lo diag.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT diag.lo -MD -MP -MF .deps/diag.Tpo -c diag.c  -fPIC -DPIC -o .libs/diag.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT diag.lo -MD -MP -MF .deps/diag.Tpo -c diag.c -o diag.o>/dev/null 2>&1
mv -f .deps/diag.Tpo .deps/diag.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT kptr.lo -MD -MP -MF .deps/kptr.Tpo -c -o kptr.lo kptr.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT kptr.lo -MD -MP -MF .deps/kptr.Tpo -c kptr.c  -fPIC -DPIC -o .libs/kptr.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT kptr.lo -MD -MP -MF .deps/kptr.Tpo -c kptr.c -o kptr.o>/dev/null 2>&1
mv -f .deps/kptr.Tpo .deps/kptr.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2ip.lo -MD -MP -MF .deps/text2ip.Tpo -c -o text2ip.lo text2ip.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2ip.lo -MD -MP -MF .deps/text2ip.Tpo -c text2ip.c  -fPIC -DPIC -o .libs/text2ip.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT text2ip.lo -MD -MP -MF .deps/text2ip.Tpo -c text2ip.c -o text2ip.o>/dev/null 2>&1
mv -f .deps/text2ip.Tpo .deps/text2ip.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c -o timer.lo timer.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c timer.c  -fPIC -DPIC -o .libs/timer.o
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT timer.lo -MD -MP -MF .deps/timer.Tpo -c timer.c -o timer.o>/dev/null 2>&1
mv -f .deps/timer.Tpo .deps/timer.Plo
/bin/sh ../../libtool --tag=CC   --mode=compile i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT unix.lo -MD -MP -MF .deps/unix.Tpo -c -o unix.lo unix.c
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT unix.lo -MD -MP -MF .deps/unix.Tpo -c unix.c  -fPIC -DPIC -o .libs/unix.o
unix.c: In function 'un_recv_connect':
unix.c:70: warning: pointer targets in passing argument 6 of 'recvfrom' differ in signedness
unix.c: In function 'un_recv':
unix.c:81: warning: pointer targets in passing argument 6 of 'recvfrom' differ in signedness
libtool: compile:  i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT unix.lo -MD -MP -MF .deps/unix.Tpo -c unix.c -o unix.o>/dev/null 2>&1
mv -f .deps/unix.Tpo .deps/unix.Plo
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -version-info 1:0:0  -o libatm.la -rpath /usr/lib text2atm.lo atm2text.lo atmequal.lo sdu2cell.lo text2qos.lo qos2text.lo qosequal.lo sap2text.lo text2sap.lo sapequal.lo misc.lo ans.lo common.lo diag.lo kptr.lo text2ip.lo timer.lo unix.lo -lresolv
libtool: link: i586-linux-uclibc-gcc -shared  .libs/text2atm.o .libs/atm2text.o .libs/atmequal.o .libs/sdu2cell.o .libs/text2qos.o .libs/qos2text.o .libs/qosequal.o .libs/sap2text.o .libs/text2sap.o .libs/sapequal.o .libs/misc.o .libs/ans.o .libs/common.o .libs/diag.o .libs/kptr.o .libs/text2ip.o .libs/timer.o .libs/unix.o   -lresolv  -march=k6-2 -isysroot /home/philipp/kernel2/build_i586/staging_dir   -Wl,-soname -Wl,libatm.so.1 -o .libs/libatm.so.1.0.0
libtool: link: (cd ".libs"&&  rm -f "libatm.so.1"&&  ln -s "libatm.so.1.0.0" "libatm.so.1")
libtool: link: (cd ".libs"&&  rm -f "libatm.so"&&  ln -s "libatm.so.1.0.0" "libatm.so")
libtool: link: i586-linux-uclibc-ar cru .libs/libatm.a  text2atm.o atm2text.o atmequal.o sdu2cell.o text2qos.o qos2text.o qosequal.o sap2text.o text2sap.o sapequal.o misc.o ans.o common.o diag.o kptr.o text2ip.o timer.o unix.o
libtool: link: i586-linux-uclibc-ranlib .libs/libatm.a
libtool: link: ( cd ".libs"&&  rm -f "libatm.la"&&  ln -s "../libatm.la" "libatm.la" )
make[4]: Leaving directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/lib'
Making all in test
make[4]: Entering directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/test'
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT aread.o -MD -MP -MF .deps/aread.Tpo -c -o aread.o aread.c
mv -f .deps/aread.Tpo .deps/aread.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o aread aread.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/aread aread.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT awrite.o -MD -MP -MF .deps/awrite.Tpo -c -o awrite.o awrite.c
mv -f .deps/awrite.Tpo .deps/awrite.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o awrite awrite.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/awrite awrite.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT ttcp.o -MD -MP -MF .deps/ttcp.Tpo -c -o ttcp.o ttcp.c
ttcp.c: In function 'main':
ttcp.c:464: warning: pointer targets in passing argument 3 of 'accept' differ in signedness
ttcp.c:471: warning: pointer targets in passing argument 3 of 'getpeername' differ in signedness
ttcp.c:509: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
ttcp.c:518: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
ttcp.c: At top level:
ttcp.c:48: warning: 'RCSid' defined but not used
mv -f .deps/ttcp.Tpo .deps/ttcp.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o ttcp_atm ttcp.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/ttcp_atm ttcp.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT atmswitch.o -MD -MP -MF .deps/atmswitch.Tpo -c -o atmswitch.o atmswitch.c
mv -f .deps/atmswitch.Tpo .deps/atmswitch.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o atmswitch atmswitch.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/atmswitch atmswitch.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT svc_recv.o -MD -MP -MF .deps/svc_recv.Tpo -c -o svc_recv.o svc_recv.c
mv -f .deps/svc_recv.Tpo .deps/svc_recv.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o svc_recv svc_recv.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/svc_recv svc_recv.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT svc_send.o -MD -MP -MF .deps/svc_send.Tpo -c -o svc_send.o svc_send.c
svc_send.c: In function 'main':
svc_send.c:28: warning: unused variable 'one'
mv -f .deps/svc_send.Tpo .deps/svc_send.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o svc_send svc_send.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/svc_send svc_send.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT align.o -MD -MP -MF .deps/align.Tpo -c -o align.o align.c
mv -f .deps/align.Tpo .deps/align.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o align align.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/align align.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT aping.o -MD -MP -MF .deps/aping.Tpo -c -o aping.o aping.c
mv -f .deps/aping.Tpo .deps/aping.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o aping aping.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/aping aping.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT br.o -MD -MP -MF .deps/br.Tpo -c -o br.o br.c
mv -f .deps/br.Tpo .deps/br.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o br br.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/br br.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT bw.o -MD -MP -MF .deps/bw.Tpo -c -o bw.o bw.c
mv -f .deps/bw.Tpo .deps/bw.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o bw bw.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/bw bw.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT isp.o -MD -MP -MF .deps/isp.Tpo -c -o isp.o isp.c
mv -f .deps/isp.Tpo .deps/isp.Po
/bin/sh ../../ylwrap ispl_y.y y.tab.c ispl_y.c y.tab.h ispl_y.h y.output ispl_y.output -- bison -y -d
/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/test/ispl_y.y:37.28-37: warning: symbol TOK_LISTEN redeclared
updating ispl_y.h
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT ispl_y.o -MD -MP -MF .deps/ispl_y.Tpo -c -o ispl_y.o ispl_y.c
mv -f .deps/ispl_y.Tpo .deps/ispl_y.Po
/bin/sh ../../ylwrap ispl_l.l lex.yy.c ispl_l.c -- flex
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT ispl_l.o -MD -MP -MF .deps/ispl_l.Tpo -c -o ispl_l.o ispl_l.c
ispl_l.c:1456: warning: 'yyunput' defined but not used
mv -f .deps/ispl_l.Tpo .deps/ispl_l.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o isp isp.o ispl_y.o ispl_l.o ../../src/lib/libatm.la -lfl
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/isp isp.o ispl_y.o ispl_l.o  ../../src/lib/.libs/libatm.so -lresolv -lfl
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT window.o -MD -MP -MF .deps/window.Tpo -c -o window.o window.c
mv -f .deps/window.Tpo .deps/window.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o window window.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/window window.o  ../../src/lib/.libs/libatm.so -lresolv
make[4]: Leaving directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/test'
Making all in debug
make[4]: Entering directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/debug'
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT delay.o -MD -MP -MF .deps/delay.Tpo -c -o delay.o delay.c
mv -f .deps/delay.Tpo .deps/delay.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o delay delay.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/delay delay.o  ../../src/lib/.libs/libatm.so -lresolv
i586-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..     -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -MT svctor.o -MD -MP -MF .deps/svctor.Tpo -c -o svctor.o svctor.c
mv -f .deps/svctor.Tpo .deps/svctor.Po
/bin/sh ../../libtool --tag=CC   --mode=link i586-linux-uclibc-gcc  -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels  -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes   -o svctor svctor.o ../../src/lib/libatm.la
libtool: link: i586-linux-uclibc-gcc -I../../src/include -Os -pipe -fomit-frame-pointer -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps -fno-align-labels -isysroot /home/philipp/kernel2/build_i586/staging_dir -isystem /home/philipp/kernel2/build_i586/staging_dir/usr/include -D_GNU_SOURCE -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/svctor svctor.o  ../../src/lib/.libs/libatm.so -lresolv
make[4]: Leaving directory `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/debug'
Making all in qgen
make[4]: E...
 
[truncated message content]

Re: [Linux-ATM-General] Due for a new release?

[chas w. - C. <ch...@cm...>]

On Wed, 22 Dec 2010 16:10:53 -0800
Philip Prindeville <phi...@re...> wrote:

> Fix attached for the first issue.

how about this for the second issue?  instead of overriding CC and
CFLAGS, i will override COMPILE and LINK.  this will also get rid of a
potential issue of having to override any LDFLAGS that the cross
environment might require for building target binaries that would break
when building host tools.

Re: [Linux-ATM-General] Due for a new release?

[Philip P. <phi...@re...>]

On 12/20/10 1:16 PM, chas williams - CONTRACTOR wrote:
> On Mon, 20 Dec 2010 11:16:22 -0800
> Philip Prindeville<phi...@re...>  wrote:
>
>> Seems to be the same issue:
>>
>> src/q2931/Makefile.am:21: shell $(CC: non-POSIX variable name
>> src/q2931/Makefile.am:21: (probably a GNU make extension)
> we need to find the path to linux/atmsap.h as understood by your cross
> compiler.  this might not be /usr/include
>
>> src/qgen/Makefile.am:8: `CFLAGS' is a user variable, you should not
>> override it; src/qgen/Makefile.am:8: use `AM_CFLAGS' instead.
> qgen runs in the local build environment.  there isnt a good well knwon
> solution for this one as far as i know.  if the user passed in CFLAGS
> i suspect he meant it for the cross compiler, not the local compiler
> i need to build this program.

Fix attached for the first issue.

Re: [Linux-ATM-General] Due for a new release?

[Philip P. <phi...@re...>]

On 12/20/10 1:16 PM, chas williams - CONTRACTOR wrote:
> On Mon, 20 Dec 2010 11:16:22 -0800
> Philip Prindeville<phi...@re...>  wrote:
>
>> Seems to be the same issue:
>>
>> src/q2931/Makefile.am:21: shell $(CC: non-POSIX variable name
>> src/q2931/Makefile.am:21: (probably a GNU make extension)
> we need to find the path to linux/atmsap.h as understood by your cross
> compiler.  this might not be /usr/include

I know why it's done... in fact I added the fix myself.

I'm just wondering why automake is failing to parse Makefile syntax properly, and if there's a simple solution to get rid of this noise.



>> src/qgen/Makefile.am:8: `CFLAGS' is a user variable, you should not
>> override it; src/qgen/Makefile.am:8: use `AM_CFLAGS' instead.
> qgen runs in the local build environment.  there isnt a good well knwon
> solution for this one as far as i know.  if the user passed in CFLAGS
> i suspect he meant it for the cross compiler, not the local compiler
> i need to build this program.

Yeah, I should send the mailing list a question about this...

-Philip

Re: [Linux-ATM-General] Due for a new release?

[Philip P. <phi...@re...>]

On 12/20/10 1:08 PM, chas williams - CONTRACTOR wrote:
> On Mon, 20 Dec 2010 11:31:58 -0800
> Philip Prindeville<phi...@re...>  wrote:
>
>
>> hosts.atm /etc cp: cannot create regular file `/etc/hosts.atm':
>> Permission denied make[4]: [install-exec-local] Error 1 (ignored)
>> test -z "/etc" || /bin/mkdir -p
>> "/home/philipp/kernel2/build_i586/root/etc" /usr/bin/install -c -m
>> 644 hosts.atm '/home/philipp/kernel2/build_i586/root/etc' ...
> this is fixed.
>
>
>> `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/extra' /usr/bin/install
>> -c -m 644 ./pca200e.bin /lib/firmware /usr/bin/install: cannot create
>> regular file `/lib/firmware/pca200e.bin': Permission denied make[6]:
> and this is fixed.  it might take a few hours to get into the
> read only repository on sourceforge.
>

Confirmed on both.

Re: [Linux-ATM-General] Due for a new release?

[chas w. - C. <ch...@cm...>]

On Mon, 20 Dec 2010 11:16:22 -0800
Philip Prindeville <phi...@re...> wrote:

> Seems to be the same issue:
> 
> src/q2931/Makefile.am:21: shell $(CC: non-POSIX variable name
> src/q2931/Makefile.am:21: (probably a GNU make extension)

we need to find the path to linux/atmsap.h as understood by your cross
compiler.  this might not be /usr/include

> src/qgen/Makefile.am:8: `CFLAGS' is a user variable, you should not
> override it; src/qgen/Makefile.am:8: use `AM_CFLAGS' instead.

qgen runs in the local build environment.  there isnt a good well knwon
solution for this one as far as i know.  if the user passed in CFLAGS
i suspect he meant it for the cross compiler, not the local compiler
i need to build this program.

Re: [Linux-ATM-General] Due for a new release?

[chas w. - C. <ch...@cm...>]

On Mon, 20 Dec 2010 11:31:58 -0800
Philip Prindeville <phi...@re...> wrote:


> hosts.atm /etc cp: cannot create regular file `/etc/hosts.atm':
> Permission denied make[4]: [install-exec-local] Error 1 (ignored)
> test -z "/etc" || /bin/mkdir -p
> "/home/philipp/kernel2/build_i586/root/etc" /usr/bin/install -c -m
> 644 hosts.atm '/home/philipp/kernel2/build_i586/root/etc' ...

this is fixed.


> `/home/philipp/kernel2/build_i586/linux-atm-V2_5_2/src/extra' /usr/bin/install
> -c -m 644 ./pca200e.bin /lib/firmware /usr/bin/install: cannot create
> regular file `/lib/firmware/pca200e.bin': Permission denied make[6]:

and this is fixed.  it might take a few hours to get into the 
read only repository on sourceforge.