Update of /cvsroot/linux-atm/linux-atm
In directory usw-pr-cvs1:/tmp/cvs-serv5287
Modified Files:
Tag: V2_4_0
config.h.in
Log Message:
Chas Williams' ia64 build fixes...
Index: config.h.in
===================================================================
RCS file: /cvsroot/linux-atm/linux-atm/Attic/config.h.in,v
retrieving revision 1.1.2.1
retrieving revision 1.1.2.2
diff -C2 -d -r1.1.2.1 -r1.1.2.2
*** config.h.in 2001/09/03 10:56:35 1.1.2.1
--- config.h.in 2001/09/14 21:17:58 1.1.2.2
***************
*** 1,2 ****
! /* config.h.in */
--- 1,84 ----
! /* config.h.in. Generated automatically from configure.in by autoheader. */
! #ifndef _ATM_CONFIG_H
! #define _ATM_CONFIG_H
!
!
! /* Define if lex declares yytext as a char * by default, not a char[]. */
! #undef YYTEXT_POINTER
!
! /*
! Default config file location for atmsigd
! */
! #define ATMSIGD_CONF "/usr/local/etc/atmsigd.conf"
!
! #undef YY_USE_CONST
!
! /*
! The UNI version can be configured at run time. Dynamic is the default. Use the
! explicit version selections only in case of problems.
! */
! #undef DYNAMIC_UNI
!
! #undef UNI30
!
! /*
! Note: some UNI 3.0 switches will show really strange behaviour if confronted
! with using 3.1 signaling, so be sure to test your network *very*
! carefully before permanently configuring machines to use UNI 3.1.
! */
! #undef UNI31
! #undef ALLOW_UNI30
!
! /*
! Some partial support for UNI 4.0 can be enabled by using UNI40
! */
! #undef UNI40
!
! /*
! If using UNI40, you can also enable peak cell rate modification as
! specified in Q.2963.1
! */
! #undef Q2963_1
!
! /*
! If you're using a Cisco LS100 or LS7010 switch, you should add the following
! line to work around a bug in their point-to-multipoint signaling (it got
! confused when receiving a CALL PROCEEDING, so we don't send it, which of
! course makes our clearing procedure slightly non-conformant):
! */
! #undef CISCO
!
! /*
! Some versions of the Thomson Thomflex 5000 won't do any signaling before they
! get a RESTART. Uncomment the next line to enable sending of a RESTART
! whenever SAAL comes up. Note that the RESTART ACKNOWLEDGE sent in response to
! the RESTART will yield a warning, because we don't implement the full RESTART
! state machine.
! */
! #undef THOMFLEX
!
! /*
! Use select() instead of poll() with MPOA
! */
! #undef BROKEN_POLL
!
! /*
! Use proposed MPOA 1.1 features
! */
! #undef MPOA_1_1
!
! /* Define if you have the mpr library (-lmpr). */
! #undef HAVE_LIBMPR
!
! /* Define if you have the resolv library (-lresolv). */
! #undef HAVE_LIBRESOLV
!
! /* Name of package */
! #undef PACKAGE
!
! /* Version number of package */
! #undef VERSION
!
!
! #endif
|
