Robert Pearce committed [r52] on Code

Change but irreverent (for now)

Robert Pearce committed [r51] on Code

The "DIY" AccDecoder "LTRYG-1"

Robert Pearce committed [r50] on Code

The same only different ;)

Robert Pearce committed [r49] on Code

LED_Lights - 74LS02

Robert Pearce committed [r48] on Code

Support for smart throttle on status bus

Robert Pearce committed [r47] on Code

Adjusted for newer gputils and my updated build environment

Robert Pearce committed [r46] on Code

Python3 compatibility and provide accessors to match pure Python version

Robert Pearce committed [r45] on Code

Further Python3 fixes

Robert Pearce committed [r44] on Code

Notes on the "LT-Ring" comms used by the booster / block detector

Robert Pearce committed [r43] on Code

Made the context header variant-specific so that feature tests work

Robert Pearce committed [r42] on Code

Placeholder for new design command station

Robert Pearce committed [r41]

First pass at code for the PIC on the booster boards. There are some issues

Robert Pearce committed [r40]

Two versions of a DCC power booster design:

Robert Pearce committed [r39]

Added a Python module to communicate with the new command station and present

Robert Pearce committed [r38]

Improved the button ordering on the encoder throttle

Robert Pearce committed [r37]

Minor documentation and error reporting improvements

Robert Pearce committed [r36]

Implemented control of loco speed from cabs - the original version acted on

Robert Pearce committed [r35]

Corrected a capacitor value, added some non-value values

Robert Pearce committed [r34]

Added a new accessory decoder with eight outputs for LED lighting only.

Robert Pearce committed [r33]

Use a SOT-23 voltage regulator instead of TO92

Robert Pearce committed [r32]

Bug fix - the operations mode CV write functions were both wrong

Robert Pearce committed [r31]

Show some progress messages while reading CVs (as it takes a while)

Robert Pearce committed [r30]

Implemented operations mode CV writes for timings and boost level

Robert Pearce committed [r29]

DCC stimulus generator for GPSim now restricts DC bias setting to valid range

Robert Pearce committed [r28]

Smart throttle receiver re-designed with surface mount parts

Robert Pearce committed [r27]

More robust handling of the smart throttle comms in the receiver

Robert Pearce committed [r26]

Partial updates for changes to the NMRA standards for CVs

Robert Pearce committed [r25]

Support for updated XtrkCAD file format (from V5.2)

Robert Pearce committed [r24]

Use a dummy version of the driver if the real one can't be loaded

Robert Pearce committed [r23]

Enhancements to CDU decoder PIC code:

Robert Pearce committed [r22]

Clean out an unwanted file - legacy of CVS

Robert Pearce committed [r21]

Modified CDU turnout decoder hardware to use parts from the JLCPCB SMD stock

Robert Pearce committed [r20]

Updated the "light accessory" decoder design to use a more modern PIC in SMD

Robert Pearce committed [r19]

Updated optical detector design to use a more modern PIC

Robert Pearce committed [r18]

Small adjustments to the CDU turnout decoder hardware design.

Robert Pearce committed [r17]

Updated GUI scripts to Python 3

Robert Pearce committed [r16]

Created a new, standalone command station using an STM32 ARM CPU

Robert Pearce committed [r15]

Updated web page with new release info

LinTrain released /lintrain/v0.4/lintrain-0.4.tgz

Robert Pearce committed [r14]

Removed a bunch of inappropriate "executable" tags from non-trunk paths

Robert Pearce committed [r13]

Updated Python module to build against Python 3 (Python 2.7 still OK, too)

Robert Pearce committed [r12]

Updated kernel driver to build against kernel 5.6 and use PARPORT if available

Robert Pearce committed [r11]

Minor tweaks in Eagle version of original command station - changed fuse

Robert Pearce committed [r10]

Oops - missed these files from the last commit!

Robert Pearce committed [r9]

"Converted" the original Seetrax Ranger command station design to Eagle

Robert Pearce committed [r8]

Updated to build on a recent system with kernel>2.6 and GCC>4

Robert Pearce committed [r7]

Added some files that were missed from the initial commit

Robert Pearce committed [r6]

Removed some stray "svn:executable" properties

Robert Pearce committed [r5]

Updated GPSim module library (for firmware testing) to build against current

Robert Pearce committed [r4]

Web page update

Robert Pearce committed [r3]

Updated PIC code including the new encoder-based smart throttle

Robert Pearce committed [r2]

Updates to hardware designs and a new type of throttle

Robert Pearce committed [r1]

Initial commit of CVS repository surface