Arguments

Program Arguments

Usage

linnetx <action> [options]

Hierarchy

• \<action>
  • scan
  • get \<attribute>
  • set \<attribute> \<value>
• \<attribute>
  • all (for get)
  • macaddr
  • ipaddr
  • name
  • model
  • ver

---

Organization

Action	arg	Description
scan	-S	Display out all switches in broadcast domain.
get	-g	Display specified setting for a given switch
set	-s	Set the specified setting for a given switch

Utility Organization

The following is the organizational structure that the Netgear configuration utility appears to have.

• System
  • Status
    • Switch Selection
      • Discovered Switches
        • Product, Switch Name, MAC Address, IP Address, Located on IP Network
        • (select switch from list)
      • Port Status
        • Port, Port Status, Linked Speed
        • (all ports | up/down | speed)
    • Switch Information
      • Product Name, Switch Name, MAC Address, Firmware Version, DHCP Mode, IP Address, Subnet Mask, Gateway Address
      • (DHCP Mode is a drop down box Enabled or Disabled, and IP subnet and gateway are text fields)
  • Matintenance
    • Change Password
    • Device Reboot
    • Factory Default
    • Firmware Upgrade
  • Monitoring
    • Port Statistics
    • Mirroring
    • Cable Tester
  • MultiCast
    • IGMP Snooping
• VLAN
  • Port Based
    • Basic
    • Advanced
  • 802.1Q
    • Basic
    • Advanced
      • VLAN Configuration
        • 
          
          
          

          Advanced 802.1Q VLAN Status	Disable/Enable
          VLAN Identifier Setting	-delete and add VLAN IDs -show current port membership

      • VLAN Membership
        • Select each ports membership type for each VLAN ID. (none, un tagged, or tagged)
      • Port PVID
        • Assign a physical port to a VLAN.
• QoS
  • Qos
    • Global Configuration
  • Rate Limit
    • Rate Limit
  • Broadcast Filtering
    • Broadcast Filtering

[Craig]

Still subject to change