Re: [Linkt-users] Linkt 0.6.99 nicht compilieren ?!

[Dieter D. <di...@de...>]

DL2GMI wrote:
> 
> Hallo zusammen,
> 
> Linkt-0.6.99-2001xxxx lässt sich auf meinem System Suse 7.1 Kernel
> 2.2.19
> nicht konfigurieren (./configure) und anschliessend compilieren (make).
> 
> bei configure sagt er, ich hätte QT nicht installiert, ist aber.
> Siehe rpm.out. Ich hänge mal noch config.log an, da steht noch mehr
> drin. Was fehlt meinem System noch zum compilieren von linKt ?
> 
> Vy 73 de Michael, DL2GMI
> 
> --
> ##########################################################
> #                                                        #
> # Michael Buser                                          #
> # Burgbergring 44                                        #
> # 88662 Ueberlingen                                      #
> # Deutschland / Germany                                  #
> # Mobilphone-Number: +49 1714718969                      #
> # Faksimile-Number : +49 7551949390                      #
> # E-Mail-Address: mic...@pl...       #
> # Homepage: http://www.planet-interkom.de/michael.buser  #
> #                                                        #
> ##########################################################
> 
>   ------------------------------------------------------------------------
> qt-2.2.3-7
> 
>   ------------------------------------------------------------------------
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
> 
> configure:615: checking host system type
> configure:636: checking target system type
> configure:654: checking build system type
> configure:713: checking for a BSD compatible install
> configure:770: checking for -p flag to install
> configure:793: checking whether build environment is sane
> configure:831: checking whether make sets ${MAKE}
> configure:877: checking for working aclocal
> configure:890: checking for working autoconf
> configure:903: checking for working automake
> configure:916: checking for working autoheader
> configure:929: checking for working makeinfo
> configure:1015: checking for a C-Compiler
> configure:1021: checking for gcc
> configure:1127: checking whether the C compiler (gcc  ) works
> configure:1143: gcc -o conftest    conftest.c  1>&5
> configure:1169: checking whether the C compiler (gcc  ) is a cross-compiler
> configure:1174: checking whether we are using GNU C
> configure:1278: checking how to run the C preprocessor
> configure:1340: checking for a C++-Compiler
> configure:1346: checking for g++
> configure:1462: checking whether the C++ compiler (g++  ) works
> configure:1483: rm -rf SunWS_cache; g++ -o conftest    conftest.C  1>&5
> configure:1509: checking whether the C++ compiler (g++  ) is a cross-compiler
> configure:1514: checking whether we are using GNU C++
> configure:1595: checking whether g++ supports -fno-exceptions
> configure:1628: checking whether g++ supports -fno-check-new
> configure:1666: checking whether g++ supports -Wno-long-long
> configure:1697: checking whether g++ supports -fno-builtin
> configure:1741: checking whether g++ supports -fexceptions
> configure:1775: checking whether g++ supports -frtti
> configure:1811: checking how to run the C++ preprocessor
> configure:1913: checking whether g++ supports -frepo
> configure:1947: checking whether g++ supports -instances=explicit
> configure:2084: checking for ld used by GCC
> configure:2152: checking if the linker (/usr/i486-suse-linux/bin/ld) is GNU ld
> configure:2169: checking for /usr/i486-suse-linux/bin/ld option to reload object files
> configure:2181: checking for BSD-compatible nm
> configure:2217: checking whether ln -s works
> configure:2238: checking how to recognise dependant libraries
> configure:2541: checking for ranlib
> configure:2608: checking for strip
> configure:2780: checking for Cygwin environment
> configure:2813: checking for mingw32 environment
> ltconfig:670:checking for gcc option to produce PIC
> ltconfig:679:checking that gcc PIC flag  -fPIC -DPIC works.
> ltconfig:741: checking if gcc static flag -static works
> ltconfig:787: checking if gcc supports -c -o file.o
> ltconfig:788: gcc -c -O2 -o out/conftest2.o  conftest.c 1>&5
> ltconfig:841: checking if gcc supports -fno-rtti -fno-exceptions
> ltconfig:842: gcc -c -O2 -fno-rtti -fno-exceptions -c conftest.c  conftest.c 1>&5
> ltconfig:1308: checking if global_symbol_pipe works
> ltconfig:1309: gcc -c -O2  conftest.c 1>&5
> ltconfig:1312: eval "/usr/bin/nm -B conftest.o | sed -n -e 's/^.*[      ]\([ABCDGISTW]\)[       ][      ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > conftest.nm"
> ltconfig:1364: gcc -o conftest -O2 -fno-builtin -fno-rtti -fno-exceptions   conftest.c conftstm.o 1>&5
> ltconfig:1705: checking for dlfcn.h
> ltconfig:1744: checking whether a program can dlopen itself
> ltconfig:1817: checking whether a statically linked program can dlopen itself
> g++ -E conftest.cc
> ltconfig:670:checking for g++ option to produce PIC
> ltconfig:679:checking that g++ PIC flag -fPIC -DPIC works.
> ltconfig:689: g++ -c -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -fno-builtin -fPIC -DPIC -DPIC  conftest.cc 1>&5
> ltconfig:741: checking if g++ static flag -static works
> ltconfig:750: g++ -o conftest -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -fno-builtin   -static conftest.cc  1>&5
> ltconfig:787: checking if g++ supports -c -o file.o
> ltconfig:788: g++ -c -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -fno-builtin -o out/conftest2.o  conftest.cc 1>&5
> ltconfig:841: checking if g++ supports -fno-rtti -fno-exceptions
> ltconfig:842: g++ -c -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -fno-builtin -fno-rtti -fno-exceptions -c conftest.cc  conftest.cc 1>&5
> ltconfig:1308: checking if global_symbol_pipe works
> ltconfig:1309: g++ -c -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -fno-builtin  conftest.cc 1>&5
> conftest.cc:9: warning: ANSI C++ forbids declaration `main' with no type
> ltconfig:1312: eval "/usr/bin/nm -B conftest.o | sed -n -e 's/^.*[      ]\([ABCDGISTW]\)[       ][      ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > conftest.nm"
> ltconfig:1364: g++ -o conftest -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -fno-builtin -fno-builtin -fno-rtti -fno-exceptions   conftest.cc conftstm.o 1>&5
> ltconfig:1705: checking for dlfcn.h
> ltconfig:1744: checking whether a program can dlopen itself
> ltconfig:1817: checking whether a statically linked program can dlopen itself
> configure:2961: checking for object suffix
> configure:2967: gcc -c -O2  conftest.c 1>&5
> configure:2987: checking for executable suffix
> configure:2997: gcc -o conftest -O2   conftest.c  1>&5
> configure:3039: checking for msgfmt
> configure:3073: checking for gmsgfmt
> configure:3118: checking for xgettext
> configure:3164: checking for extra includes
> configure:3195: checking for extra libs
> configure:3229: checking for libz
> configure:3255: gcc -o conftest -O2     conftest.c   -lz  1>&5
> configure:3284: checking size of int
> configure:3303: gcc -o conftest -O2   conftest.c  1>&5
> configure:3322: checking size of long
> configure:3341: gcc -o conftest -O2   conftest.c  1>&5
> configure:3360: checking size of char *
> configure:3379: gcc -o conftest -O2   conftest.c  1>&5
> configure:3400: checking for dlopen in -ldl
> configure:3444: checking for shl_unload in -ldld
> configure:3463: gcc -o conftest -O2   conftest.c -ldld   1>&5
> /usr/i486-suse-linux/bin/ld: cannot find -ldld
> collect2: ld returned 1 exit status
> configure: failed program was:
> #line 3452 "configure"
> #include "confdefs.h"
> /* Override any gcc2 internal prototype to avoid an error.  */
> /* We use char because int might match the return type of a gcc2
>     builtin and then its argument prototype would still apply.  */
> char shl_unload();
> 
> int main() {
> shl_unload()
> ; return 0; }
> configure:3492: checking for X
> configure:3531: gcc -E  conftest.c >/dev/null 2>conftest.out
> configure:3607: gcc -o conftest -O2   conftest.c -lXt  1>&5
> /usr/i486-suse-linux/bin/ld: cannot find -lXt
> collect2: ld returned 1 exit status
> configure: failed program was:
> #line 3600 "configure"
> #include "confdefs.h"
> 
> int main() {
> XtMalloc()
> ; return 0; }
> configure:3773: checking for IceConnectionNumber in -lICE
> configure:3792: gcc -o conftest -O2   -L/usr/X11R6/lib conftest.c -lICE   1>&5
> configure:3821: checking for libXext
> configure:3844: gcc -o conftest -O2  -L/usr/X11R6/lib  conftest.c -lXext -lX11  1>&5
> configure:3932: checking for libpng
> configure:3962: gcc -o conftest -O2 -I/usr/X11R6/include    conftest.c  -L/usr/X11R6/lib  -lpng -lz -lm -lX11  1>&5
> configure:3994: checking for libjpeg6b
> configure:4030: gcc -o conftest -O2   conftest.c -L/usr/X11R6/lib  -ljpeg6b -lm 1>&5
> /usr/i486-suse-linux/bin/ld: cannot find -ljpeg6b
> collect2: ld returned 1 exit status
> configure: failed program was:
> #line 4009 "configure"
> #include "confdefs.h"
> /* Override any gcc2 internal prototype to avoid an error.  */
> struct jpeg_decompress_struct;
> typedef struct jpeg_decompress_struct * j_decompress_ptr;
> typedef int size_t;
> #ifdef __cplusplus
> extern "C" {
> #endif
>     void jpeg_CreateDecompress(j_decompress_ptr cinfo,
>                                     int version, size_t structsize);
> #ifdef __cplusplus
> }
> #endif
> /* We use char because int might match the return type of a gcc2
>     builtin and then its argument prototype would still apply.  */
> 
> int main() {
> jpeg_CreateDecompress(0L, 0, 0);
> ; return 0; }
> configure:4052: checking for libjpeg
> configure:4088: gcc -o conftest -O2   conftest.c -L/usr/X11R6/lib  -ljpeg -lm 1>&5
> configure:4152: checking for main in -lcompat
> configure:4167: gcc -o conftest -O2   conftest.c -lcompat   1>&5
> /usr/i486-suse-linux/bin/ld: cannot find -lcompat
> collect2: ld returned 1 exit status
> configure: failed program was:
> #line 4160 "configure"
> #include "confdefs.h"
> 
> int main() {
> main()
> ; return 0; }
> configure:4189: checking for crypt in -lcrypt
> configure:4208: gcc -o conftest -O2   conftest.c -lcrypt   1>&5
> configure:4282: checking for the third argument of getsockname
> configure:4311: g++ -c -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -fno-builtin  conftest.C 1>&5
> In file included from /usr/include/bits/posix1_lim.h:126,
>                  from /usr/include/limits.h:144,
>                  from /usr/lib/gcc-lib/i486-suse-linux/2.95.2/include/limits.h:117,
>                  from /usr/lib/gcc-lib/i486-suse-linux/2.95.2/include/syslimits.h:7,
>                  from /usr/lib/gcc-lib/i486-suse-linux/2.95.2/include/limits.h:11,
>                  from /usr/include/bits/socket.h:31,
>                  from /usr/include/sys/socket.h:34,
>                  from configure:4301:
> /usr/include/bits/local_lim.h:36: linux/limits.h: Datei oder Verzeichnis nicht gefunden
> In file included from /usr/include/sys/socket.h:34,
>                  from configure:4301:
> /usr/include/bits/socket.h:300: asm/socket.h: Datei oder Verzeichnis nicht gefunden
> configure: failed program was:
> #line 4298 "configure"
> #include "confdefs.h"
> 
> #include <sys/types.h>
> #include <sys/socket.h>
> 
> int main() {
> 
> socklen_t a=0;
> getsockname(0,(struct sockaddr*)0, &a);
> 
> ; return 0; }
> configure:4340: g++ -c -Werror -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long -fno-builtin  conftest.C 1>&5
> In file included from /usr/include/bits/posix1_lim.h:126,
>                  from /usr/include/limits.h:144,
>                  from /usr/lib/gcc-lib/i486-suse-linux/2.95.2/include/limits.h:117,
>                  from /usr/lib/gcc-lib/i486-suse-linux/2.95.2/include/syslimits.h:7,
>                  from /usr/lib/gcc-lib/i486-suse-linux/2.95.2/include/limits.h:11,
>                  from /usr/include/bits/socket.h:31,
>                  from /usr/include/sys/socket.h:34,
>                  from configure:4330:
> /usr/include/bits/local_lim.h:36: linux/limits.h: Datei oder Verzeichnis nicht gefunden
> In file included from /usr/include/sys/socket.h:34,
>                  from configure:4330:
> /usr/include/bits/socket.h:300: asm/socket.h: Datei oder Verzeichnis nicht gefunden
> configure: failed program was:
> #line 4327 "configure"
> #include "confdefs.h"
> 
> #include <sys/types.h>
> #include <sys/socket.h>
> 
> int main() {
> 
> int a=0;
> getsockname(0,(struct sockaddr*)0, &a);
> 
> ; return 0; }
> configure:4382: checking for dnet_ntoa in -ldnet
> configure:4401: gcc -o conftest -O2   conftest.c -ldnet   1>&5
> /usr/i486-suse-linux/bin/ld: cannot find -ldnet
> collect2: ld returned 1 exit status
> configure: failed program was:
> #line 4390 "configure"
> #include "confdefs.h"
> /* Override any gcc2 internal prototype to avoid an error.  */
> /* We use char because int might match the return type of a gcc2
>     builtin and then its argument prototype would still apply.  */
> char dnet_ntoa();
> 
> int main() {
> dnet_ntoa()
> ; return 0; }
> configure:4423: checking for dnet_ntoa in -ldnet_stub
> configure:4442: gcc -o conftest -O2   conftest.c -ldnet_stub   1>&5
> /usr/i486-suse-linux/bin/ld: cannot find -ldnet_stub
> collect2: ld returned 1 exit status
> configure: failed program was:
> #line 4431 "configure"
> #include "confdefs.h"
> /* Override any gcc2 internal prototype to avoid an error.  */
> /* We use char because int might match the return type of a gcc2
>     builtin and then its argument prototype would still apply.  */
> char dnet_ntoa();
> 
> int main() {
> dnet_ntoa()
> ; return 0; }
> configure:4464: checking for inet_ntoa
> configure:4492: gcc -o conftest -O2   conftest.c  1>&5
> configure:4554: checking for connect
> configure:4582: gcc -o conftest -O2   conftest.c  1>&5
> configure:4645: checking for remove
> configure:4673: gcc -o conftest -O2   conftest.c  1>&5
> configure:4737: checking for shmat
> configure:4765: gcc -o conftest -O2   conftest.c  1>&5
> configure:4831: checking for killpg in -lucb
> configure:4850: gcc -o conftest -O2   conftest.c -lucb   1>&5
> /usr/i486-suse-linux/bin/ld: cannot find -lucb
> collect2: ld returned 1 exit status
> configure: failed program was:
> #line 4839 "configure"
> #include "confdefs.h"
> /* Override any gcc2 internal prototype to avoid an error.  */
> /* We use char because int might match the return type of a gcc2
>     builtin and then its argument prototype would still apply.  */
> char killpg();
> 
> int main() {
> killpg()
> ; return 0; }
> configure:4922: checking for bool
> configure:4945: g++ -c -O2 -fno-exceptions -fno-check-new -Wall -pedantic -W -Wpointer-arith Hallo Michael,
ich kompiliere Linkt-0.6.99 auf meinem SuSE-Linux immer so:
./configure --prefix=/opt/kde2 --exec-prefix=/opt/kde2
--with-qt-dir=/usr/lib/qt2
so lauten die Standard-Pfade , falls dein KDE2 bzw QT2 woanders sein
sollte, musst
Du ggf. dei Pfade anpassen.
Vorraussetzung zum kompilieren sind natürlich zum KDE2 diverse 
xxx-devel RPM-Pakete ...

73 und viel Spaß beim PR
-- 
e-mail   - di...@de...