I don't know where to find the actual linknx package for my openwrt (mipsel)...
I looked on ouaye.net/linknx but there are only packages for other devices
Is one opf those suitable for mipsel?
----------------------
Webknx:
I just tried a bit playing around, but it's hard to understand because I dont's speak french
If you think about a translation please let me know, I could help you for the translation to german.
I thinked to translate the project in the source -codes but if you release a new version, all work would be gone, so maybe you think about using language-files, which would be easier to translate.
greetings from austria
EPIX
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Which branch of Openwrt are you using? Whiterussian, Kamikaze? Which version?
By the way, mipsel is not a device, but a family of devices which have the same architecture (MIPS processor and little endian).
There are already mipsel packages for OpenWRT whitrussian RC6 and Kamikaze r7908.
KnxWeb will for sure be translated but I dont know when and how.
Regards,
Jean-François
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
KnxWeb: no Problem, there's no hurry, I just wanted to mention this aspect:
as english is better to reach a lot of people, for the future of this visu it's godd if a lot of people can understand this program. During the development it's not necessary to use a languagefile, but with respect of the future it's a good thing to think abaout it and define stringvariables indstead of "direct-naming" of user-outputs.
In a second stage it's easier to implement a languagefile if the Outputs are already defined via stringvariables....
regards EPIX
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
the package file linknx_0.0.1.23-1_mipsel.ipk present.
But inside the file "Packages" 0.0.1.22 is still the latest.
So simply using
ipkg install linknx
will install 0.0.1.22 instead of 0.0.1.23.
So I thought the "Packages" file should be updated.
Unless you think 0.0.1.22 is still the preferred version.
greetings
Michael
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello Francoise!
I don't know where to find the actual linknx package for my openwrt (mipsel)...
I looked on ouaye.net/linknx but there are only packages for other devices
Is one opf those suitable for mipsel?
----------------------
Webknx:
I just tried a bit playing around, but it's hard to understand because I dont's speak french
If you think about a translation please let me know, I could help you for the translation to german.
I thinked to translate the project in the source -codes but if you release a new version, all work would be gone, so maybe you think about using language-files, which would be easier to translate.
greetings from austria
EPIX
Hi,
Which branch of Openwrt are you using? Whiterussian, Kamikaze? Which version?
By the way, mipsel is not a device, but a family of devices which have the same architecture (MIPS processor and little endian).
There are already mipsel packages for OpenWRT whitrussian RC6 and Kamikaze r7908.
KnxWeb will for sure be translated but I dont know when and how.
Regards,
Jean-François
I'm using whiterussian 0.9...
The most actual package is
http://ouaye.net/linknx/OpenWRT-WhiteRussian-RC6/linknx_0.0.1.22-1_mipsel.ipk
but on other packages the version 0.0.1.23 is the latest, therefor my question...
KnxWeb: no Problem, there's no hurry, I just wanted to mention this aspect:
as english is better to reach a lot of people, for the future of this visu it's godd if a lot of people can understand this program. During the development it's not necessary to use a languagefile, but with respect of the future it's a good thing to think abaout it and define stringvariables indstead of "direct-naming" of user-outputs.
In a second stage it's easier to implement a languagefile if the Outputs are already defined via stringvariables....
regards EPIX
Oups,
Now I understand your question better.
I forgot to copy the OpenWRT packages on the web.
I just copied them in the right place.
Regards,
Jean-François
Thanks a lot for the quick reply & solution...
EPIX
Hello Jean-François,
the 0.0.1.23 is not yet contained in the Packages file located at
http://ouaye.net/linknx/OpenWRT-WhiteRussian-RC6/Packages.
Maybe you can update this file too.
thanks
Michael
it is located at
http://ouaye.net/linknx/OpenWRT-WhiteRussian-RC6/
greetings
Hi,
The file is now updated with Linknx 0.0.1.23
Regards,
Jean-François
Hello Jean-François,
the package file linknx_0.0.1.23-1_mipsel.ipk present.
But inside the file "Packages" 0.0.1.22 is still the latest.
So simply using
ipkg install linknx
will install 0.0.1.22 instead of 0.0.1.23.
So I thought the "Packages" file should be updated.
Unless you think 0.0.1.22 is still the preferred version.
greetings
Michael
Hello Jean-François,
just upgraded flawless with
ipkg update
ipkg upgrade
thanks a lot
Michael