I've a problem with my dimmers and linknx/knxweb:
The dimmers communicate their on/off status not on the 1-bit on/off GAD, but on a different GAD.
So if I switch on the light via a dim up command linknx doesn't recognize that the light is already on and
therefore knxweb shows a turne off light.
Usually all EIB devices have additional listening only group addresses. Is there a reason why linknx
doesn't implement additional GADs, or am I missing something?
thanks,
peter
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I've a problem with my dimmers and linknx/knxweb:
The dimmers communicate their on/off status not on the 1-bit on/off GAD, but on a different GAD.
So if I switch on the light via a dim up command linknx doesn't recognize that the light is already on and
therefore knxweb shows a turne off light.
Usually all EIB devices have additional listening only group addresses. Is there a reason why linknx
doesn't implement additional GADs, or am I missing something?
thanks,
peter
Hi,
Linknx is implementing listener group addresses, but I didn't have take the time to add it in the wiki documantation. You can find some info here:
http://sourceforge.net/forum/message.php?msg_id=4609749
Regards,
Jean-François