Hello, as the title says… I'm on a bit of a problem here. I'm running Ubuntu Studio and trying to get my POD Studio UX2 working here (It's actually the las sthing that attaches me to Winbugs, so I'd be greately happy if I could make this work!!)
I installed line6usb drivers from the sources in the trunk using wget and my terminal, and mi Studio UX2 is known by my computer now… the thing is that I can't seem to be able to open a jack server with it so I can't make no playing and no recording :S
Most of the times I plug it in and it gets on nicely, but with the annoying thing that one of the clip lights is turned on (Not quite sure what that means if I'm not playing or even not with the guitar plugged in…). Anyway, something that I've noticed is that, yesterday I plugged in my UX2 and got recognized without any of the clip buttons lightened up… miraculously I press "Start" on Qjackctl and the server started flawlessly!!! And when I selected JACK output with Audacious I could actually hear audio from my headphones connected to the UX2 (Made me so happy :') ). At some point I tried to lower down the volume on the control of my hardware and no more sound was played, and crashed my audacious… (same thing happened later by modifying the volume controls on my computer instead of on my UX2)
Now somehow I couldn't go back to plug my UX2 in and don't get any clip light on or Jack server up… Help please!!
Here's what I get when I try to start Qjackctl:
10:07:16.231 Patchbay desactivada.
10:07:16.364 Reiniciar estadísticas.
10:07:16.372 Cambios en las conexiones ALSA.
10:07:16.392 D-BUS: Disponible (org.jackaudio.service aka jackdbus).
10:07:16.635 D-BUS: El servidor JACK no puede iniciarse. Disculpa
Cannot connect to server socket err = No existe el archivo o el directorio
Cannot connect to server request channel
jack server is not running or cannot be started
Cannot connect to server socket err = No existe el archivo o el directorio
Cannot connect to server request channel
jack server is not running or cannot be started
10:07:16.685 Cambió el gráfico de conexiones ALSA.
Sat May 18 10:07:16 2013: Starting jack server…
Sat May 18 10:07:16 2013: JACK server starting in realtime mode with priority 10
Sat May 18 10:07:16 2013: control device hw:2
Sat May 18 10:07:16 2013: control device hw:2
Sat May 18 10:07:16 2013: [1m[31mERROR: Failed to acquire device name : Audio2 error : Cannot allocate memory[0m
Sat May 18 10:07:16 2013: [1m[31mERROR: Audio device hw:2 cannot be acquired…[0m
Sat May 18 10:07:16 2013: [1m[31mERROR: Cannot initialize driver[0m
Sat May 18 10:07:16 2013: [1m[31mERROR: JackServer::Open failed with -1[0m
Sat May 18 10:07:16 2013: [1m[31mERROR: Failed to open server[0m
Sat May 18 10:07:17 2013: Saving settings to "/home/german/.config/jack/conf.xml" …
10:07:18.893 No puede conectarse al servidor JACK como cliente. - La operación global falló. - No puede conectarse al servidor. Por favor revise la ventana de mensajes para mas información.
Cannot connect to server socket err = No existe el archivo o el directorio
Cannot connect to server request channel
jack server is not running or cannot be started
Here's what I get on arecord -l:
german@Asd:~$ arecord -l
**** Lista de CAPTURE dispositivos hardware ****
tarjeta 0: SB , dispositivo 0: ALC269VB Analog
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 2: PODStudioUX2 , dispositivo 0: POD Studio UX2
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
So… the hardware is detected… but somehow jack can't communicate with it so well…
Any help?
Thanks againn!
Btw: My computer is an Asus K52dr. 6Gb RAM Ddr3. AMD Phenom triple core. And i'm running "3.5.0-28-lowlatency" of Ubuntu Studio 12.10 completely up to date.
Edit: Now when the Jack server starts succesfully and I try to route something to the UX2 now I get this:
Sat May 18 10:29:35 2013: [1m[31mERROR: ALSA: poll time out, polled for 8706070 usecs[0m
Sat May 18 10:29:35 2013: [1m[31mERROR: JackAudioDriver:rocessAsync: read error, stopping…[0m
10:29:51.928 Cambió el gráfico de conexiones ALSA.
Sat May 18 10:29:51 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:29:51 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:29:51 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:30:39 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:30:39 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:30:39 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:31:39 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:31:39 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:31:39 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:31:44 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:31:44 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:31:44 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:32:08 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:32:08 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:32:08 2013: [1m[31mERROR: Cannot create new client[0m
10:32:12.864 Cambió el gráfico de conexiones ALSA.
Sat May 18 10:32:13 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:32:13 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:32:13 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:32:37 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:32:37 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:32:37 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:32:42 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:32:42 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:32:42 2013: [1m[31mERROR: Cannot create new client[0m
(qjackctl.real:2541): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed
(qjackctl.real:2541): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed
Sat May 18 10:38:19 2013: [1m[31mERROR: JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection timed out[0m
Sat May 18 10:38:19 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:38:19 2013: [1m[31mERROR: Cannot create new client[0m
(qjackctl.real:2541): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed
(qjackctl.real:2541): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed
And when I try to open Rakarrack a message window appears that says that no jack server is detected :S
I'm a bit confused…
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello, as the title says… I'm on a bit of a problem here. I'm running Ubuntu Studio and trying to get my POD Studio UX2 working here (It's actually the las sthing that attaches me to Winbugs, so I'd be greately happy if I could make this work!!)
I installed line6usb drivers from the sources in the trunk using wget and my terminal, and mi Studio UX2 is known by my computer now… the thing is that I can't seem to be able to open a jack server with it so I can't make no playing and no recording :S
Most of the times I plug it in and it gets on nicely, but with the annoying thing that one of the clip lights is turned on (Not quite sure what that means if I'm not playing or even not with the guitar plugged in…). Anyway, something that I've noticed is that, yesterday I plugged in my UX2 and got recognized without any of the clip buttons lightened up… miraculously I press "Start" on Qjackctl and the server started flawlessly!!! And when I selected JACK output with Audacious I could actually hear audio from my headphones connected to the UX2 (Made me so happy :') ). At some point I tried to lower down the volume on the control of my hardware and no more sound was played, and crashed my audacious… (same thing happened later by modifying the volume controls on my computer instead of on my UX2)
Now somehow I couldn't go back to plug my UX2 in and don't get any clip light on or Jack server up… Help please!!
Here's what I get when I try to start Qjackctl:
Here's what I get on arecord -l:
And here's what I get on aplay -l:
So… the hardware is detected… but somehow jack can't communicate with it so well…
Any help?
Thanks againn!
Btw: My computer is an Asus K52dr. 6Gb RAM Ddr3. AMD Phenom triple core. And i'm running "3.5.0-28-lowlatency" of Ubuntu Studio 12.10 completely up to date.
Edit: Now when the Jack server starts succesfully and I try to route something to the UX2 now I get this:
And when I try to open Rakarrack a message window appears that says that no jack server is detected :S
I'm a bit confused…