Menu
▾
▴
Re: [Libusb-win32-devel] Help, please
|
From: Stephan M. <Ste...@ia...> - 2007-06-06 14:45:38
|
> Wow, what a rapid reply! Thanks. I tried your fix, and it has got me
> one step further.
>
> (I note that usb_set_configuration (udev, 0) gives the same error -22 as
> not calling it. The only configuration I have is numbered 0; is this
> OK?)
Yes, that's ok. The parameter is the configuaration value (from the
descriptor), NOT the configuaration index.
>
> Setting configuration to 1 makes the call return 0, so it looks like
> it's working, but it fails at the next step. In the main loop, I do:
>
> printf ("Starting...\n");
> while (1)
> {
> if (usb_interrupt_read (contact_closure_usb_dev,
> contact_closure_usb_input_endpoint,
> cBuf,
> 4,
> 0) > 0)
> {
> printf ("Got some\n");
> }
> }
>
> but the printf statement is never executed, although I am doing things
> that should cause the interface to send messages - which are 4 bytes
> each.
>
> Any more ideas?
>
> Dave
>
> > -----Original Message-----
> > From: lib...@li...
> > [mailto:lib...@li...] On
> > Behalf Of Stephan Meyer
> > Sent: 2007 June 06 14:05
> > To: lib...@li...
> > Subject: Re: [Libusb-win32-devel] Help, please
> >
> > Try to replace:
> >
> > uci = usb_claim_interface (udev, 0);
> >
> > with
> >
> > usb_set_configuation(udev, 1);
> > uci = usb_claim_interface (udev, 0);
> >
> > It should work then.
> >
> >
> > Stephan
> >
> >
> >
> >
> > > Help, please. I've started writing a programme to use
> > libusb-win32, but
> > > I'm getting an error right at the start.
> > >
> > > First, some background. I've used libusb under Linux
> > (Fedora Core 5)
> > > successfully, to write driver functions for the first USB
> > device that I
> > > wrote firmware for. That device works entirely happily
> > under FC5 and
> > > under RISC O (yes, the Acorn/Pace/Castle one). I have now written
> > > firmware for a second device. Perhaps unsurprisingly, this device's
> > > firmware is very heavily based on the previous one. This
> > device also
> > > works entirely happily under RISC OS. I thought I'd try
> > this Windows
> > > thing, but I'm having no success.
> > >
> > > The entire programme is here:
> > >
> > > // Can I get this system to do what I want?
> > > #include <usb.h>
> > > #include <stdio.h>
> > >
> > > #define VENDOR_ID_NICE 0x16A8
> > > #define PRODUCT_ID_CONTACT_CLOSURE 0x0004
> > >
> > > int init (void)
> > > {
> > > //int usb_busses;
> > > struct usb_bus* bus;
> > > struct usb_device* dev;
> > > usb_dev_handle *udev;
> > > int retval = -1;
> > > int uci;
> > > int done = 0;
> > >
> > > printf ("Hello\n");
> > >
> > > usb_init ();
> > > usb_find_busses ();
> > > usb_find_devices ();
> > > for (bus = usb_get_busses (); bus; bus = bus->next)
> > > {
> > > for (dev = bus->devices; dev && (done == 0); dev =
> > > dev->next)
> > > {
> > > udev = usb_open (dev);
> > > printf ("udev = %p\n", udev);
> > > if ((dev->descriptor.idVendor == VENDOR_ID_NICE)
> > > && (dev->descriptor.idProduct ==
> > > PRODUCT_ID_CONTACT_CLOSURE))
> > > {
> > > printf ("Found it!\n");
> > > uci = usb_claim_interface (udev, 0);
> > > printf ("Return value from
> > > usb_claim_interface: %d\n", uci);
> > > retval = uci;
> > > done = 1;
> > > }
> > > else
> > > {
> > > printf ("Not ours, VID = %04X, PID =
> > > %04X\n", dev->descriptor.idVendor, dev->descriptor.idProduct);
> > > usb_close (udev);
> > > printf ("Closed: %p\n", udev);
> > > }
> > > }
> > > }
> > > return retval;
> > > }
> > >
> > > int main (void)
> > > {
> > > int init_result;
> > >
> > > init_result = init ();
> > > if (init_result == 0)
> > > {
> > > printf ("Starting...\n");
> > > }
> > > else
> > > {
> > > printf ("Failed\n");
> > > }
> > > }
> > >
> > > When I run it, I get a couple of "Not ours, VID = " etc.
> > messages for
> > > other USB items I have, followed by "Found it!" But then
> > "Return value
> > > from usb_claim_interface: -22" which I don't understand. I think it
> > > indicates an illegal parameter. udev must be OK, I assume.
> > My device
> > > only has interface 0. It's a very simple device, with a
> > vendor-specific
> > > protocol, specified at interface level.
> > >
> > > Can anyone see what I'm doing wrong, please?
> > >
> > > libusb-win32 downloaded from the main libusb-win32 site
> > this week. No
> > > previous copy on this computer. Windows XP.
> > >
> > > Dave
> > >
> > >
> > >
> > **************************************************************
> > **************************************************************
> > **************************************************************
> > *******************************************************
> > >
> > > NICE CTI Systems UK Limited ("NICE") is registered in England under
> > > company number, 3403044. The registered office of NICE is at
> > > Tollbar Way, Hedge End, Southampton, Hampshire SO30 2ZP.
> > >
> > > Confidentiality: This communication and any attachments are intended
> > > for the above-named persons only and may be confidential and/or
> > > legally privileged. Any opinions expressed in this communication are
> > > not necessarily those of NICE. If this communication has come to you
> > > in error you must take no action based on it, nor must you copy or
> > > show it to anyone; please delete/destroy and inform the sender by e-
> > > mail immediately.
> > >
> > > Monitoring: NICE may monitor incoming and outgoing e-mails.
> > >
> > > Viruses: Although we have taken steps toward ensuring that this e-
> > > mail and attachments are free from any virus, we advise that in
> > > keeping with good computing practice the recipient should ensure
> > > they are actually virus free.
> > >
> > >
> > **************************************************************
> > **************************************************************
> > **************************************************************
> > **********************************************************
> > >
> > >
> > >
> > >
> > >
> > --------------------------------------------------------------
> > -----------
> > > This SF.net email is sponsored by DB2 Express
> > > Download DB2 Express C - the FREE version of DB2 express and take
> > > control of your XML. No limits. Just data. Click to get it now.
> > > http://sourceforge.net/powerbar/db2/
> > > _______________________________________________
> > > Libusb-win32-devel mailing list
> > > Lib...@li...
> > > https://lists.sourceforge.net/lists/listinfo/libusb-win32-devel
> >
> >
> > --------------------------------------------------------------
> > -----------
> > This SF.net email is sponsored by DB2 Express
> > Download DB2 Express C - the FREE version of DB2 express and take
> > control of your XML. No limits. Just data. Click to get it now.
> > http://sourceforge.net/powerbar/db2/
> > _______________________________________________
> > Libusb-win32-devel mailing list
> > Lib...@li...
> > https://lists.sourceforge.net/lists/listinfo/libusb-win32-devel
> >
>
>
-------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Libusb-win32-devel mailing list
> Lib...@li...
> https://lists.sourceforge.net/lists/listinfo/libusb-win32-devel
|
