[libopenstm32-devel] New debuging tool

[Gareth M. <ga...@bl...>]

Hi

As I've mentioned before, I've been working on a new debugging tool
for the Cortex-M3.  This is a hardware/firmware solution that implements
a GDB server over USB.  It currently supports the STM32 and LM3S
families of devices.

I've setup the SF project:
project page: https://sourceforge.net/projects/blackmagicdebug/
project wiki: https://sourceforge.net/apps/mediawiki/blackmagicdebug/
website: http://www.blacksphere.co.nz/main/blackmagic
mailing-list: https://sourceforge.net/mail/?group_id=407419

The firmware can also be built as an application using an FT2232 device
to implement the JTAG or SWD interfaces.  This has been tested using
the Floss-JTAG under Linux and MacOS.  See the project wiki for more
info.

If you do try it out please let me know what you think.  Any comments
would be appreciated.  Thank you, Esden, for your input so far.

Regards,
Gareth

-- 
Black Sphere Technologies Ltd.

Web: www.blacksphere.co.nz
Mobile: +64 27 777 2182
Tel: +64 9 478 8885
Skype: gareth.mcmullin
LinkedIn: http://nz.linkedin.com/in/gsmcmullin