I trying to use an LCD from an old Netscaler 7000.
References which are available on it : AMC1602AR-B-B12WTDW-SP03-S2 06256001018
The brand seems to be a OrientLCD AMC1602AR_B_B6WTDW
Controller seems to be a S6A0069 and I have found on an LCDproc mailing list that it seems to be a hd44780 compatible device.
It is a com2 device which is using 0x2F8.
I configured the LCDd.conf to use the hd44780 drivers and made many tests, tested many ConnectionType or CharMap .... LCD is working but I only get hieroglyph displayed on it.
Thanks for your help
Kind Regards
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I trying to use an LCD from an old Netscaler 7000.
References which are available on it : AMC1602AR-B-B12WTDW-SP03-S2 06256001018
The brand seems to be a OrientLCD AMC1602AR_B_B6WTDW
Controller seems to be a S6A0069 and I have found on an LCDproc mailing list that it seems to be a hd44780 compatible device.
It is a com2 device which is using 0x2F8.
I configured the LCDd.conf to use the hd44780 drivers and made many tests, tested many ConnectionType or CharMap .... LCD is working but I only get hieroglyph displayed on it.
Thanks for your help
Kind Regards