Re: [lcd4linux] lcd4linux clean shutdown

[Andreas W. <an...@t-...>]

Hi,

maybe there is an Option in Bios Setup to keep the usb ports on power
or not?

Regards,
Andreas

-----Ursprüngliche Nachricht-----
Von: Till Harbaum / Lists [mailto:li...@ha...] 
Gesendet: Montag, 2. Mai 2011 17:13
An: lcd...@li...
Betreff: Re: [lcd4linux] lcd4linux clean shutdown

Hi,

that's unintended. The glcd2usb should be painting some simple
"splash screen" while not being used. This sounds like your board
is switching USB power on and off on driver load/unload.

Till

On Monday, May 02, 2011 08:16:50 Stefan Krister wrote:
> Hi Jonathan,
> 
> Jonathan McCrohan schrieb am 02.05.2011 01:02:
> > I am wondering what the easiest method of making lcd4linux clear the
> > screen and dim the backlight on a Matrix Orbital LCD display upon
> > shutdown.
> 
> I was very surprised with my GLCD2USB plugged into my PC Engines Alix
> board. 1st the display was off. During boot as the USB driver loads the
> display came to life and the display screensaver [1] ran. When lcd4linux
> started, normal content was shown [2].
> 
> On shutdown the same in opposit happened. At the end, all was dark and
off.
(...)