Re: [lcd4linux] Program crashes Zire72

[Clay B. <cla...@gm...>]

On 03:03 Mon 05 Jun     , Alexander Garcia wrote:
> I cannot get lcd4linux to run properly. With the config somewhat nailed
> down, running lcd4linux -Fvvq displays:
> 
> $ lcd4linux -Fvvq
> Version 0.10.1-CVS starting
> plugin_cfg.c: Variable tick = '500' (500)
> lcd4linux.c: initializing driver MatrixOrbital
> MatrixOrbital: using model 'LK204-24-USB'
> MatrixOrbital: using port '/dev/ttyUSB6' at 19200 baud
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: display detection failed.
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> MatrixOrbital: read(/dev/ttyUSB6): EAGAIN
> initializing layout 'Default'
> lcd4linux.c: starting main loop
> 
> 
> And my Palm crashes with a fatal error: fatal exception, which then
> needs to be rebooted.
> 
> dmesg | grep usb yields that the palm takes /dev/ttyUSB0
> and /dev/ttyUSB1 on bootup, and following each subsequent crash, takes
> the next 2 numbers. ie usb2 and 3, usb4 and 5, etc.
> 
> On the palm I'm running PalmOrb 1.1a4, which works in windows using
> lcdsmartie.
> 
> Any help is appreciated.
Perhaps you can enumerate your settings on the palm (I use palm-orb,
too), and attach your config file for lcd4linux?
> 
> Alex
> 
> 
> 
> _______________________________________________
> Lcd4linux-users mailing list
> Lcd...@li...
> https://lists.sourceforge.net/lists/listinfo/lcd4linux-users