[lcd4linux] Problems with T6963C

[Juergen D. <li...@ka...>]

Hi,

I have a LCD display "EA W240-7KHLW"[1] with a T6963C controller.
The display size is 240x128 pixels. I'm using lcd4linux-cvs with
this config:

,----
| ....
| Display T6963-240x128 {
|   Driver 'T6963'
| 	Port '/dev/parports/0'
| 	Size '240x128'
| 	Font '6x8'
| 	Wire.WR 'STROBE'
| 	Wire.RD 'SELECT'
| 	Wire.CE 'AUTOFD'
| 	Wire.CD 'INIT'
| }
| ....
`----

My probleme is, that only the upper half is working properly; the
lower half can also be used but there is something like a snow shower.
If I put some text to this area the snow is gone. Does somebody have
the same problem?=20

Another question is, if it is planed to support larger fonts? For my
display i think a 8x16 font would be better to read from far away.

[1] Datasheets:=20
    display: http://www.lcd-module.de/deu/pdf/grafik/w240-7.pdf
	controller: http://www.lcd-module.de/eng/pdf/zubehoer/t6963.pdf

PS: Sorry for my bad english ;)

Thank you for help
--=20
/j<r>d

Beware of a dark-haired man with a loud tie.