> >What exactly is the problem? Could you please post the output of
> >lcd4linux -Fvvq?
HI thanks for your answer
> I use debian etch with gnome
> sensors applet works well with kernel 2.6.20.4 and 2.6.22.2
> but as i said in lcd4linux the plugin "i2c sensors" does not work
> here is output of this command
>
> debian:/usr/local/bin# ./lcd4linux -Fvvq
> Version 0.10.2-SVN-796 starting
> plugin_cfg.c: Variable minute = '60000' (60000)
> plugin_cfg.c: Variable tack = '100' (100)
> plugin_cfg.c: Variable tick = '500' (500)
> [KVV] Using station 89
> [KVV] Using default port 80
> [KVV] Using default refresh interval of 60 seconds
> [KVV] Default abbreviation setting: off
> lcd4linux.c: initializing driver T6963
> T6963: $Rev: 771 $
> T6963: 240x128 SingleScan 6 bits/cell
> udelay: CPU supports Time Stamp Counter
> udelay: CPU runs at 2998.778000 MHz
> udelay: using TSC delay loop, 2999 ticks per microsecond
> using raw port 0x378 (deprecated!)
> You *really* should change your setup and use ppdev!
> T6963: wiring: DISPLAY:CE - PARPORT:AUTOFD (Pin 14)
> T6963: wiring: DISPLAY:CD - PARPORT:INIT (Pin 16)
> T6963: wiring: DISPLAY:RD - PARPORT:SLCTIN (Pin 17)
> T6963: wiring: DISPLAY:WR - PARPORT:STROBE (Pin 1)
> T6963: timing: ACC = 180 ns (default 150 ns, fuzz 120)
> T6963: timing: OH = 60 ns (default 50 ns, fuzz 120)
> T6963: timing: PW = 96 ns (default 80 ns, fuzz 120)
> T6963: timing: DH = 48 ns (default 40 ns, fuzz 120)
> T6963: timing: CDS = 120 ns (default 100 ns, fuzz 120)
> initializing layout 'Default'
> lcd4linux.c: starting main loop
> 127.0.0.1: Connection refused
> i2c_sensors: unable to autodetect i2c sensors!
>
>
|
