lcd4linux-users

[lcd4linux] Mitsubishi M50530 displays

[Stefan K. <ste...@cr...>]

Hi,

I just want to know, how far the development is by now.
I've got a M50530 based 8x20 module, the controller-driver pinout and 
technical papers.

I also have to manage, how to connect it to the parallel-port.

Any help welcome.



Stefan Krister

[lcd4linux] Mitsubishi M50530 displays

[Nitzo N. <nit...@ya...>]

Hello,
Can you please send me the curcuit diagramm and the
board layout to connect the M50530 to the par.port?
 
I prefer it in png/jpg form but eagle format is good
too.
 
Regards, Nitzo.

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

Re: [lcd4linux] Mitsubishi M50530 displays

[Michael R. <re...@eu...>]

Stefan Krister wrote:
> 
> I just want to know, how far the development is by now.
> I've got a M50530 based 8x20 module, the controller-driver pinout and
> technical papers.

The CVS version contains a running driver for a 8x24 display. For this
is the only display I have, I cannot tell how other sizes work.
Therefore it would be nice if you'd do some testing...

If you need assistance with CVS access, let me know.


> I also have to manage, how to connect it to the parallel-port.

I've got a circuit diagram and a board layout (for a
"Lochrasterplatine", don't know the english word) from Eagle (there's a
free linux version of eagle). If you have Eagle installed, I can send
you the files.


bye, Michael

-- 
netWorks                                          Vox: +43 316  698260
Michael Reinelt                                   Fax: +43 316  692343
Geisslergasse 4                                   GSM: +43 676 3079941
A-8045 Graz, Austria                          e-mail: re...@eu...

Re: [lcd4linux] Mitsubishi M50530 displays

[Stefan K. <ste...@cr...>]

Hi Michael,

> The CVS version contains a running driver for a 8x24 display. For this
> is the only display I have, I cannot tell how other sizes work.
> Therefore it would be nice if you'd do some testing...


yes of course - I'll do my best.

> If you need assistance with CVS access, let me know.


Yes too. I've got no experience with CVS ..

If possible, send me the current contents of the CVS (.tgz preferred).

> I've got a circuit diagram and a board layout (for a
> "Lochrasterplatine", don't know the english word) from Eagle (there's a
> free linux version of eagle). If you have Eagle installed, I can send
> you the files.

And 'yes please' the third time.


Stefan Krister