So here I'm back with svn code from ... about 5 minutes ago. Trying to open my
c't-includ usb display using the serdisplib (with libusb-support) driver. I
call lcd4linux like this:
$ ./lcd4linux -Ff ~/lcd4tanu.conf
serdisplib: open(07c0:1501) failed:
This _is_ the complete output, there's no error message. lsusb looks like
this:
marcel@d-wwow:~/Desktop/lcd4linux$ sudo lsusb
Bus 005 Device 005: ID 05ac:1204 ****
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 015: ID 03f0:b802 ****
Bus 001 Device 013: ID 2001:3700 ****
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 004: ID 07c0:1501 Code Mercenaries Hard- und Software GmbH
IO-Warrior 24
Bus 004 Device 003: ID 04a9:220d ****
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:c01e ****
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
(I removed all other device names)
This is my Display section:
Display TanuDisp {
Driver 'serdisplib'
Model 'CTINCLUD'
Size '128x64'
Port '07c0:1501'
}
Should work like this, shouldn't it? :)
Marcel
|
