Hi Youssef,
> I am trying to write a lcd4linux driver for the Futaba VFD DM140GINK.
> Which is a USB VFD display.
Are you really sure it's a *USB* Display? I could not find anything
about USB in the datasheet you provided....
> I wanted to ask if someone knows if there is
> a driver for this display.
I don't think so; but a driver would be very welcome...
> In /proc/bus/usb/devices, it is defined this way:
> T: Bus=02 Lev=02 Prnt=04 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=040b ProdID=7001 Rev= 2.00
> S: Manufacturer=DM-140GINK Demo
> S: Product=DM-140GINK Demo
> C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
> E: Ad=02(O) Atr=03(Int.) MxPS= 8 Ivl=4ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
> I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=25ms
Oh, as you got it reported by lsusb, it really seems to be a USB display :-)
But the datasheet seems not to fit the display....
Again: I'd really appreciate a driver for this display! If you need any
help, let me know....
bye, Michael
--
Michael Reinelt <re...@eu...>
http://home.pages.at/reinelt
GPG-Key 0xDF13BA50
ICQ #288386781
|
