kwintv-help — Discuss about kWinTV with other users.

[Kwintv-help] to unemploye

[Jetta V. <ga...@ca...>]

Hi,

Save over 50% on your medication

http://www.ledrx .com

Remove space in the above link



he was behaving. Muttering and gesticulating, Mr. Crouch appeared to be
talking to someone that he alone could see. He reminded Harry vividly of
an old tramp he had seen once when out shopping with the Dursleys. That

Re: [Kwintv-help] news switc

[Ruaridh S. <st...@ma...>]

Hi,


V / A G R A
V A L / U M
C / A L / S

http://www.tedrx .com

Remove space in the above link.



godfather two months ago.
There was a simple reason for Siriuss complete absence from Harrys
life until then Sirius had been in Azkaban, the terrifying wizard jail

Re: [Kwintv-help] PHAzigRMACY

[Elen K. <pi...@ma...>]

Hi,
Pharmacy directly from the manufacturer, economize over 50 %

http://www.lodrx*.com - Remove "*" to make the link working!

--

He was glad when Sirius broke the silence.
The wands connected?  he said, looking from Harry to Dumbledore. Why? 
Harry looked up at Dumbledore again, on whose face there was an arrested

Re: [Kwintv-help] EDchibouqu

[Massoud N. <min...@ma...>]

Good day,

VlA_AGRA  $1, 80
ClA_ALIS  $3, 00
LEV_VlTRA $3, 35

http://www.printeryml*com
( Important ! Replace "*" with "." )

--
Magical Creatures. Hagrid, however, considers himself to be above such
petty restrictions.
I was just having some fun,  he says, before hastily changing the subject.

Re: [Kwintv-help] now cupe

[Esperanta J. <lo...@aa...>]

Hi,

VIxAGxRA $3. 35
CIxALxIS $3. 75
VAxLIxUM $1. 30
AMxBIxEN $2. 90
SOxMA    $1. 15

and many other

http://www.rx555*com ( Do not forget to replace "*" with "." )

--
Hermione was now teaching Krum to say her name properly; he kept calling
her Hermy-own. 
Her-my-oh-nee,  she said slowly and clearly.

Re: [Kwintv-help] preparednes

[Esmond M. <as...@am...>]

Hi,

V r a g r a   from $ 3, 33 http://www.derionkunhadesunbeidase.com
=20
  _____ =20


wouldnt be enough. In about two seconds there was going to be a

[Kwintv-help] KWinTV scans but no output

[Jacek B. <hus...@an...>]

Hello !

Under xawtv, I get image thru tvgrabber (not thru overlay) but no sound
even if it recognizes my sound mixer (cs4235)
bt878 (Best Buy)
when launched xawtv or kwintv, modules show up at lsmod (tuner, tvaudio,
bttv, i2c-algo-bit, i2c-core, videodev,msp3400). My sound is OK except
in tv. (kscd runs normalway, when kde launches, the kde sound is heard).

Under KWintv, it scans and seems to locate working channels, but no
image nor sound.

Where sd the way be to the image and sound in KWintv ?

[Kwintv-help] Kwintv crashes out on startup, worked before.

[Guy Z. <gz...@fr...>]

Hi George,

I have these (kwintv -v) versions on my LMD8.1 system:
Qt: 2.3.1
KDE: 2.2.1
KWinTV: 0.8.10

I compiled kwintv using the mandrake spec file without a glitch and used 
kwintv without a problem with my Dart (Aims) TV-Radio Live card until 
some days ago my scsi-bus froze; I was forced to reset manually. 
Allthough I have the journaled XFS file system, when I rebooted a lot of 
my KDE config files were filled with ^@ characters rendering KDE 
unusable. I checked each file and deleted the faulty ones since KDE 
re-creates them with default values, so I was able to get my system back 
fully working except for, guess once, kwintv.

The symptom is that kwintv comes up perfectly with sound and then after 
a few seconds crashes out and since KDE's crash handler takes over I 
still see a perfect image but without sound this time. Exiting the 
handler brings everything down off course.  There's nothing wrong with 
the card or v4l since my gkrellm radio plugin can still play radio and 
xawtv still plays tv like before. I operate as a non-root user.

This is the output I get in my terminal window:
 /dev/video [v4l2]: v4l2 support seems to be missing.  Using v4l instead.
DCOPServer up and running.
KCrash: crashing.... crashRecursionCounter = 2
KCrash: Application Name = kwintv path = <unknown> pid = 8920
kdeinit: Fatal IO error: client killed
kdeinit: sending SIGHUP to children.
KLauncher: Exiting on signal 1
kdeinit: sending SIGTERM to children.
kdeinit: Exit.



I tried a lot to resolve this but after each try it crashes out the same.
- delete all kwintv config files : kwintv re-installs them and then crashes.
- re-install the kwintv rpm I compiled : nope.
- re-compile kwintv & re-install : nope.
- try as root : nope.
- create a new user so no old kde config files around : nope.
- re-installed all fonts since the last line of a 'strace kwintv' is 
about a font:
readv(3, [{"9-adobe-helvetica-bold-o-normal-"..., 22516}, {"", 0}], 2) = 
22516
--- SIGSEGV (Segmentation fault) --- : nope.
- checked permissions on /dev/video* and others : no obvious wrongs there.
- re-compiled with --debug-enabled (configure): crashhandler reports 
this backtrace (last relevant lines):
(no debugging symbols found)...[New Thread 1024 (LWP 9057)]
0x40e1e1d9 in wait4 () from /lib/libc.so.6
#0  0x40e1e1d9 in wait4 () from /lib/libc.so.6
#1  0x40e9bef8 in __check_rhosts_file () from /lib/libc.so.6
#2  0x4059e2ae in KCrash::defaultCrashHandler () from 
/usr/lib/libkdecore.so.3

#3  0x40d26847 in _IO_2_1_stderr_ () from /usr/lib/libstdc++-libc6.2-2.so.3

- ran kwintv --nocrashhandler : got a core of 7MB.

This goes beyond my capacities, do you have a clue what could be going 
wrong?
Maybe it has nothing to do with the crash I had but with a setting in 
KDE I recently switched on. Remember, xawtv works and as far as I know 
everything else on my system does. I love kwintv so hate missing it.

Now for what could be a bug : since I have a radio & a tv on the card it 
happens that I listen to the radio and then switch on kwintv without 
stopping the radio 1st; well, kwintv then eats all memory & all swap 
space while delivering this msg continually loop:
kwintv: WARNING: Fatal: v4l1: VIDIOC_G_AUDIO in ::v4l1if

I sincerely hope you can help me with this,

Thanks,

Guy.

[Kwintv-help] Please leave this list

[George S. <st...@0w...>]

Please leave this list.  You can join the new kwintv list at:

http://mail.kde.org/mailman/listinfo/kwintv


Thank you.

-- 

George Staikos

[Kwintv-help] [ANNOUNCE] KWinTV 0.8.10 Released

[George S. <st...@kd...>]

   I have released KWinTV version 0.8.10 this evening.  It includes many
bugfixes and some new functionality.  Please test and provide feedback via
bugs.kde.org.  Details can be found in the ChangeLog.

   Some key features of this release include preliminary Xinerama support, 
many crash fixes, a new channel file format (now using KConfig), fullscreen 
mode bug fixes, and much code cleanup.  In addition, a new toy called 
"KWinTVScreensaver" is included.  I would not consider this to be usable yet, 
but I would appreciate any feedback on it's potential usefulness and design.

   As always, I encourage people to submit any patches they feel appropriate
and try out the code from KDE CVS.  The next release is schedule for
approximate 1.5 weeks from now.

source tar.gz and unofficial SuSE 7.3 rpm and srpm can be found at:

http://www.staikos.on.ca/~staikos/kwintv/

There are no RedHat or Mandrake packages at this time, and there are no 
Debian packages.

This is likely to be the last release this year due to KDE 3.0 work on my 
part.  The most likely case for a new release before the New Year is in the 
event that there is a critical bug affecting most users.

--

George Staikos

[Kwintv-help] [ANNOUNCE] KWinTV 0.8.9 Released

[George S. <st...@kd...>]

   I have released KWinTV version 0.8.9 this afternoon.  It includes many 
bugfixes and some new functionality.  Please test and provide feedback via  
bugs.kde.org.  Details can be found in the ChangeLog.

   As always, I encourage people to submit any patches they feel appropriate 
and try out the code from KDE CVS.  The next release is schedule for 
approximate 1.5 weeks from now.

source tar.gz and redhat rpm and srpm can be found at:

http://www.staikos.on.ca/~staikos/kwintv/

A link to SuSE rpms is also there.  There are no Mandrake packages at this 
time, and there are no Debian packages.

-- 

George Staikos

[Kwintv-help] [ANNOUNCE] KWinTV 0.8.8 Released

[George S. <st...@kd...>]

   I have released KWinTV version 0.8.8 this evening.  It includes many 
bugfixes, some new functionality, a new build system, and the beginning of Xv 
support [not yet functional].  Please test and provide feedback via 
bugs.kde.org.  This release should be much more stable than previous 
releases, and it fixes a couple of critical bugs introduced in 0.8.7.

   As always, I encourage people to submit any patches they feel appropriate 
and try out the code from KDE CVS.  I hope to continue to make weekly or 
bi-weekly releases until the code is very stable and Xv support is nearly 
complete.

source tar.gz, mandrake rpm and srpm, and redhat rpm and srpm can be found at:

http://www.staikos.on.ca/~staikos/kwintv/

-- 

George Staikos

[Kwintv-help] files missing when compiling kwintv

[Louisa F. <lo...@co...>]

I'm trying to install kwintv-0.8.5 on my pc. I have redhat 6.1.
When I type make everything is fine until:

In file included from wintv.cpp:34:
wintvmain.h:43: kdockwidget.h: No such file or directory
In file included from wintvmain.h:55,
                 from wintv.cpp:34:
wintvscreen.h:37: kpopupmenu.h: No such file or directory
wintv.cpp:46: khelpmenu.h: No such file or directory
wintv.cpp:47: kglobal.h: No such file or directory
wintv.cpp:48: kstddirs.h: No such file or directory
wintv.cpp:49: kcmdlineargs.h: No such file or directory
wintv.cpp:50: kaboutdata.h: No such file or directory
make[3]: *** [wintv.o] Error 1
make[3]: Leaving directory `/root/kwintv-0.8.5/kwintv'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/root/kwintv-0.8.5/kwintv'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/kwintv-0.8.5'
make: *** [all-recursive-am] Error 2              

I found an email archive on the web that said that to solve this problem
one needed to install kdelibs-devel. However I have this package
(version 1.1.1) installed
and it does not contain the files that can't be found above. What can I do
to solve this problem?

Thanks very much

Louisa Ferrier
Division of Informatics
University of Edinburgh
2 Buccleuch Place, Edinburgh EH8 9LW		
		

[Kwintv-help] Crashes on startup

[Christian K. <ck...@gm...>]

Hi!

I'm running SuSE7.2 with Kernel 2.4.5, KDE 2.1.2 and
ALSA 0.5.11. kwintv is version 0.8.5.
Compiling works, but when I try to start kwintv it crashes.
The modules are loaded without errors and xawtv works fine.

Thanks for your help!
Christian

This output is created by the KDE-crashmanager:

[New Thread 1024 (LWP 16991)]
0x40a9f289 in wait4 () from /lib/libc.so.6
#0  0x40a9f289 in wait4 () from /lib/libc.so.6
#1  0x40b0d828 in __DTOR_END__ () from /lib/libc.so.6
#2  0x402d2960 in KCrash::defaultCrashHandler ()
     from /opt/kde2/lib/libkdecore.so.3
#3  0x4114adbd in pthread_sighandler () from /lib/libpthread.so.0
#4  <signal handler called>
#5  0x404ac637 in QCursor::handle () from /usr/lib/libqt.so.2
#6  0x404cacad in QWidget::create () from /usr/lib/libqt.so.2
#7  0x40569ee6 in QWidget::QWidget () from /usr/lib/libqt.so.2
#8  0x40278816 in KApplication::init () from /opt/kde2/lib/libkdecore.so.3
#9  0x40277ff3 in KApplication::KApplication ()
     from /opt/kde2/lib/libkdecore.so.3
#10 0x805705f in TVApplication::TVApplication (this=0x8104ac8,
      argc=@0xbffff4b4, argv=0xbffff51c) at wintv.cpp:103
#11 0x8057f51 in main (argc=1, argv=0xbffff51c) at wintv.cpp:406
#12 0x40a12c6f in __libc_start_main () from /lib/libc.so.6

[Kwintv-help] Coredump

[Roland S. <rs...@r2...>]

Hi,

I'm sorry if this posting had already been here- but the archives are
down :(
I'm running kWinTV 0.7.5 on a RH7.0 system.
My TV-Card is a LuckyStar Conference TV(BT878).
Each time I try to start kWinTV I get a coredump:

Debug: v4l1: Using interface Video4Linux in ::v4lxif 
Debug: v4l1: Grabber name: BT878
Debug:   capture: Can capture to memory 
Debug:   tuner: Has a tuner of some form 
Debug:   teletext: Has teletext capability 
Debug:   overlay: Can overlay its image onto the frame buffer 
Debug:  clipping: Overlay clipping is supported 
Debug:   frameram: Overlay overwrites frame buffer memory 
Debug:  scales: The hardware supports image scaling 
Debug: v4l1: range of tv size : 32x32 => 924x576 
Debug: v4l1: input channels: 16711712
Segmentation fault (core dumped)     

Can anyone give me some hint what to do?

Thanks a lot,

Roland

[Kwintv-help] bttv, xawtv, RedHat-7 - HELP!

[Darren N. <da...@da...>]

Hello,

I'm trying to get kwintv & xawtv running on RedHat-7. I have a hauppage WinTV
PCI card and I love to watch TV!! They worked fine for me on redhat-6.2 with
XFree86-3.x, but now I am using XFree86-4.0.1 and things are not happy:

[root@hewes bttv-0.7.46]# rpm -q kwintv
kwintv-0.7.5-1

[root@hewes bttv-0.7.46]# kwintv 
Warning: main: VideoModeExtension Version mismatch, disabled
Warning: main: server version 2.0 != included version 0.8  <-----SEE???
Debug: v4l1: Using interface Video4Linux in ::v4lxif
Debug: v4l1: Grabber name: BT878(Hauppauge new)
[snip]


[root@hewes bttv-0.7.46]# rpm -qa | egrep xawtv
xawtv-radio-3.23-1
xawtv-misc-3.23-1
xawtv-3.23-1
xawtv-webcam-3.23-1

When I run xawtv I see:

v4l: bttv version 0.5.35
v4l: prehistoric bttv version found, please try to  <----- SEE??
     upgrade the driver before mailing bug reports
v4l: 1280x1024, 32 bit/pixel, 5120 byte/scanline

Basically, both applications will start running, but they corrupt my display
pretty badly, spraying pixels all over the screen, as well as just in their
window.

Someone has said I need to enable DGA in my XFree86-4, but I'm quite sure I 
DO! have it enabled already. My XFree86 logfile reports:

(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.0.1a, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA             <----------------SEE!?
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
[snip]

And looking at the output from kwintv, I see:

	Warning: main: VideoModeExtension Version mismatch, disabled
	Warning: main: server version 2.0 != included version 0.8

so it looks to me like the XFree86 server is running DGA-v2.

My question is simple. What do I need to do to get either kwintv or xawtv
running on my Redhat-7 box? I've tried compiling a new bttv-0.7.46 module as
xawtv recommends, but not only does it not build, but it somehow corrupts my
kernel tree, so I can no longer build the kernel or modules.

Thanks in advance!

-Darren