Menu
▾
▴
[kvm-ia64-devel] [PATCH 08/28] RFC: ia64/xen: xen hand written assembly code paravirtualization.
|
From: <yam...@va...> - 2008-02-21 22:31:49
|
Signed-off-by: Isaku Yamahata <yam...@va...>
---
arch/ia64/kernel/entry.S | 41 +-
arch/ia64/xen/xenentry.S | 798 +++++++++++++++
arch/ia64/xen/xenivt.S | 2204 +++++++++++++++++++++++++++++++++++++++++
arch/ia64/xen/xenminstate.h | 320 ++++++
include/asm-ia64/privop.h | 26 +
include/asm-ia64/xen/privop.h | 22 +
6 files changed, 3399 insertions(+), 12 deletions(-)
create mode 100644 arch/ia64/xen/xenentry.S
create mode 100644 arch/ia64/xen/xenivt.S
create mode 100644 arch/ia64/xen/xenminstate.h
create mode 100644 include/asm-ia64/privop.h
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 3c331c4..39bb7d5 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -180,7 +180,7 @@ END(sys_clone)
* called. The code starting at .map relies on this. The rest of the code
* doesn't care about the interrupt masking status.
*/
-GLOBAL_ENTRY(ia64_switch_to)
+GLOBAL_ENTRY(__ia64_switch_to)
.prologue
alloc r16=ar.pfs,1,0,0,0
DO_SAVE_SWITCH_STACK
@@ -234,7 +234,7 @@ GLOBAL_ENTRY(ia64_switch_to)
;;
srlz.d
br.cond.sptk .done
-END(ia64_switch_to)
+END(__ia64_switch_to)
/*
* Note that interrupts are enabled during save_switch_stack and load_switch_stack. This
@@ -375,7 +375,7 @@ END(save_switch_stack)
* - b7 holds address to return to
* - must not touch r8-r11
*/
-ENTRY(load_switch_stack)
+GLOBAL_ENTRY(load_switch_stack)
.prologue
.altrp b7
@@ -635,8 +635,16 @@ GLOBAL_ENTRY(ia64_ret_from_syscall)
adds r2=PT(R8)+16,sp // r2 = &pt_regs.r8
mov r10=r0 // clear error indication in r10
(p7) br.cond.spnt handle_syscall_error // handle potential syscall failure
+#ifdef CONFIG_PARAVIRT_GUEST
+ ;;
+ // don't fall through, ia64_leave_syscall may be #define'd
+ br.cond.sptk.few ia64_leave_syscall
+ ;;
+#endif
END(ia64_ret_from_syscall)
+#ifndef CONFIG_PARAVIRT_GUEST
// fall through
+#endif
/*
* ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
* need to switch to bank 0 and doesn't restore the scratch registers.
@@ -681,7 +689,7 @@ END(ia64_ret_from_syscall)
* ar.csd: cleared
* ar.ssd: cleared
*/
-ENTRY(ia64_leave_syscall)
+GLOBAL_ENTRY(__ia64_leave_syscall)
PT_REGS_UNWIND_INFO(0)
/*
* work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -691,7 +699,7 @@ ENTRY(ia64_leave_syscall)
* extra work. We always check for extra work when returning to user-level.
* With CONFIG_PREEMPT, we also check for extra work when the preempt_count
* is 0. After extra work processing has been completed, execution
- * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+ * resumes at ia64_work_processed_syscall with p6 set to 1 if the extra-work-check
* needs to be redone.
*/
#ifdef CONFIG_PREEMPT
@@ -709,7 +717,8 @@ ENTRY(ia64_leave_syscall)
cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
#endif
-.work_processed_syscall:
+.global __ia64_work_processed_syscall;
+__ia64_work_processed_syscall:
adds r2=PT(LOADRS)+16,r12
adds r3=PT(AR_BSPSTORE)+16,r12
adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
@@ -788,7 +797,7 @@ ENTRY(ia64_leave_syscall)
mov.m ar.ssd=r0 // M2 clear ar.ssd
mov f11=f0 // F clear f11
br.cond.sptk.many rbs_switch // B
-END(ia64_leave_syscall)
+END(__ia64_leave_syscall)
#ifdef CONFIG_IA32_SUPPORT
GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
@@ -800,10 +809,18 @@ GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
st8.spill [r2]=r8 // store return value in slot for r8 and set unat bit
.mem.offset 8,0
st8.spill [r3]=r0 // clear error indication in slot for r10 and set unat bit
+#ifdef CONFIG_PARAVIRT_GUEST
+ ;;
+ // don't fall through, ia64_leave_kernel may be #define'd
+ br.cond.sptk.few ia64_leave_kernel
+ ;;
+#endif
END(ia64_ret_from_ia32_execve)
+#ifndef CONFIG_PARAVIRT_GUEST
// fall through
+#endif
#endif /* CONFIG_IA32_SUPPORT */
-GLOBAL_ENTRY(ia64_leave_kernel)
+GLOBAL_ENTRY(__ia64_leave_kernel)
PT_REGS_UNWIND_INFO(0)
/*
* work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -1130,9 +1147,9 @@ skip_rbs_switch:
;;
ld8 r8=[r2]
ld8 r10=[r3]
- br.cond.sptk.many .work_processed_syscall // re-check
+ br.cond.sptk.many ia64_work_processed_syscall // re-check
-END(ia64_leave_kernel)
+END(__ia64_leave_kernel)
ENTRY(handle_syscall_error)
/*
@@ -1172,7 +1189,7 @@ END(ia64_invoke_schedule_tail)
* be set up by the caller. We declare 8 input registers so the system call
* args get preserved, in case we need to restart a system call.
*/
-ENTRY(notify_resume_user)
+GLOBAL_ENTRY(notify_resume_user)
.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs in case of syscall restart!
mov r9=ar.unat
@@ -1234,7 +1251,7 @@ ENTRY(sys_rt_sigreturn)
adds sp=16,sp
;;
ld8 r9=[sp] // load new ar.unat
- mov.sptk b7=r8,ia64_leave_kernel
+ mov.sptk b7=r8,__ia64_leave_kernel
;;
mov ar.unat=r9
br.many b7
diff --git a/arch/ia64/xen/xenentry.S b/arch/ia64/xen/xenentry.S
new file mode 100644
index 0000000..38a509d
--- /dev/null
+++ b/arch/ia64/xen/xenentry.S
@@ -0,0 +1,798 @@
+/*
+ * ia64/xen/entry.S
+ *
+ * Alternate kernel routines for Xen. Heavily leveraged from
+ * ia64/kernel/entry.S
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ * Dan Magenheimer <dan.magenheimer@.hp.com>
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/cache.h>
+#include <asm/errno.h>
+#include <asm/kregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable.h>
+#include <asm/percpu.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+
+#ifdef CONFIG_XEN
+#include "xenminstate.h"
+#include <asm/paravirt_nop.h>
+#else
+#include "minstate.h"
+#endif
+
+/*
+ * prev_task <- ia64_switch_to(struct task_struct *next)
+ * With Ingo's new scheduler, interrupts are disabled when this routine gets
+ * called. The code starting at .map relies on this. The rest of the code
+ * doesn't care about the interrupt masking status.
+ */
+#ifdef CONFIG_XEN
+GLOBAL_ENTRY(xen_switch_to)
+ BR_IF_NATIVE(__ia64_switch_to, r22, p7)
+#else
+GLOBAL_ENTRY(ia64_switch_to)
+#endif
+ .prologue
+ alloc r16=ar.pfs,1,0,0,0
+ DO_SAVE_SWITCH_STACK
+ .body
+
+ adds r22=IA64_TASK_THREAD_KSP_OFFSET,r13
+ movl r25=init_task
+ mov r27=IA64_KR(CURRENT_STACK)
+ adds r21=IA64_TASK_THREAD_KSP_OFFSET,in0
+ dep r20=0,in0,61,3 // physical address of "next"
+ ;;
+ st8 [r22]=sp // save kernel stack pointer of old task
+ shr.u r26=r20,IA64_GRANULE_SHIFT
+ cmp.eq p7,p6=r25,in0
+ ;;
+ /*
+ * If we've already mapped this task's page, we can skip doing it again.
+ */
+(p6) cmp.eq p7,p6=r26,r27
+(p6) br.cond.dpnt .map
+ ;;
+.done:
+ ld8 sp=[r21] // load kernel stack pointer of new task
+#ifdef CONFIG_XEN
+ // update "current" application register
+ mov r8=IA64_KR_CURRENT
+ mov r9=in0;;
+ XEN_HYPER_SET_KR
+#else
+ mov IA64_KR(CURRENT)=in0 // update "current" application register
+#endif
+ mov r8=r13 // return pointer to previously running task
+ mov r13=in0 // set "current" pointer
+ ;;
+ DO_LOAD_SWITCH_STACK
+
+#ifdef CONFIG_SMP
+ sync.i // ensure "fc"s done by this CPU are visible on other CPUs
+#endif
+ br.ret.sptk.many rp // boogie on out in new context
+
+.map:
+#ifdef CONFIG_XEN
+ movl r25=XSI_PSR_IC // clear psr.ic
+ ;;
+ st4 [r25]=r0
+ ;;
+#else
+ rsm psr.ic // interrupts (psr.i) are already disabled here
+#endif
+ movl r25=PAGE_KERNEL
+ ;;
+ srlz.d
+ or r23=r25,r20 // construct PA | page properties
+ mov r25=IA64_GRANULE_SHIFT<<2
+ ;;
+#ifdef CONFIG_XEN
+ movl r8=XSI_ITIR
+ ;;
+ st8 [r8]=r25
+ ;;
+ movl r8=XSI_IFA
+ ;;
+ st8 [r8]=in0 // VA of next task...
+ ;;
+ mov r25=IA64_TR_CURRENT_STACK
+ // remember last page we mapped...
+ mov r8=IA64_KR_CURRENT_STACK
+ mov r9=r26;;
+ XEN_HYPER_SET_KR;;
+#else
+ mov cr.itir=r25
+ mov cr.ifa=in0 // VA of next task...
+ ;;
+ mov r25=IA64_TR_CURRENT_STACK
+ mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped...
+#endif
+ ;;
+ itr.d dtr[r25]=r23 // wire in new mapping...
+#ifdef CONFIG_XEN
+ ;;
+ srlz.d
+ mov r9=1
+ movl r8=XSI_PSR_IC
+ ;;
+ st4 [r8]=r9
+ ;;
+#else
+ ssm psr.ic // reenable the psr.ic bit
+ ;;
+ srlz.d
+#endif
+ br.cond.sptk .done
+#ifdef CONFIG_XEN
+END(xen_switch_to)
+#else
+END(ia64_switch_to)
+#endif
+
+#ifdef CONFIG_XEN
+GLOBAL_ENTRY(xen_work_processed_syscall_with_check)
+ BR_IF_NATIVE(__ia64_work_processed_syscall, r2, p7)
+ br.cond.sptk xen_work_processed_syscall
+END(xen_work_processed_syscall_with_check)
+#endif
+
+/*
+ * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
+ * need to switch to bank 0 and doesn't restore the scratch registers.
+ * To avoid leaking kernel bits, the scratch registers are set to
+ * the following known-to-be-safe values:
+ *
+ * r1: restored (global pointer)
+ * r2: cleared
+ * r3: 1 (when returning to user-level)
+ * r8-r11: restored (syscall return value(s))
+ * r12: restored (user-level stack pointer)
+ * r13: restored (user-level thread pointer)
+ * r14: set to __kernel_syscall_via_epc
+ * r15: restored (syscall #)
+ * r16-r17: cleared
+ * r18: user-level b6
+ * r19: cleared
+ * r20: user-level ar.fpsr
+ * r21: user-level b0
+ * r22: cleared
+ * r23: user-level ar.bspstore
+ * r24: user-level ar.rnat
+ * r25: user-level ar.unat
+ * r26: user-level ar.pfs
+ * r27: user-level ar.rsc
+ * r28: user-level ip
+ * r29: user-level psr
+ * r30: user-level cfm
+ * r31: user-level pr
+ * f6-f11: cleared
+ * pr: restored (user-level pr)
+ * b0: restored (user-level rp)
+ * b6: restored
+ * b7: set to __kernel_syscall_via_epc
+ * ar.unat: restored (user-level ar.unat)
+ * ar.pfs: restored (user-level ar.pfs)
+ * ar.rsc: restored (user-level ar.rsc)
+ * ar.rnat: restored (user-level ar.rnat)
+ * ar.bspstore: restored (user-level ar.bspstore)
+ * ar.fpsr: restored (user-level ar.fpsr)
+ * ar.ccv: cleared
+ * ar.csd: cleared
+ * ar.ssd: cleared
+ */
+#ifdef CONFIG_XEN
+GLOBAL_ENTRY(xen_leave_syscall)
+ BR_IF_NATIVE(__ia64_leave_syscall, r22, p7)
+#else
+ENTRY(ia64_leave_syscall)
+#endif
+ PT_REGS_UNWIND_INFO(0)
+ /*
+ * work.need_resched etc. mustn't get changed by this CPU before it returns to
+ * user- or fsys-mode, hence we disable interrupts early on.
+ *
+ * p6 controls whether current_thread_info()->flags needs to be check for
+ * extra work. We always check for extra work when returning to user-level.
+ * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
+ * is 0. After extra work processing has been completed, execution
+ * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+ * needs to be redone.
+ */
+#ifdef CONFIG_PREEMPT
+ rsm psr.i // disable interrupts
+ cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
+(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
+ ;;
+ .pred.rel.mutex pUStk,pKStk
+(pKStk) ld4 r21=[r20] // r21 <- preempt_count
+(pUStk) mov r21=0 // r21 <- 0
+ ;;
+ cmp.eq p6,p0=r21,r0 // p6 <- pUStk || (preempt_count == 0)
+#else /* !CONFIG_PREEMPT */
+#ifdef CONFIG_XEN
+ movl r2=XSI_PSR_I_ADDR
+ mov r18=1
+ ;;
+ ld8 r2=[r2]
+ ;;
+(pUStk) st1 [r2]=r18
+#else
+(pUStk) rsm psr.i
+#endif
+ cmp.eq pLvSys,p0=r0,r0 // pLvSys=1: leave from syscall
+(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
+#endif
+#ifdef CONFIG_XEN
+.global xen_work_processed_syscall;
+xen_work_processed_syscall:
+#else
+.work_processed_syscall:
+#endif
+ adds r2=PT(LOADRS)+16,r12
+ adds r3=PT(AR_BSPSTORE)+16,r12
+ adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
+ ;;
+(p6) ld4 r31=[r18] // load current_thread_info()->flags
+ ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for "loadrs"
+ nop.i 0
+ ;;
+ mov r16=ar.bsp // M2 get existing backing store pointer
+ ld8 r18=[r2],PT(R9)-PT(B6) // load b6
+(p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
+ ;;
+ ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE) // load ar.bspstore (may be garbage)
+(p6) cmp4.ne.unc p6,p0=r15, r0 // any special work pending?
+(p6) br.cond.spnt .work_pending_syscall
+ ;;
+ // start restoring the state saved on the kernel stack (struct pt_regs):
+ ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
+ ld8 r11=[r3],PT(CR_IIP)-PT(R11)
+(pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE!
+ ;;
+ invala // M0|1 invalidate ALAT
+#ifdef CONFIG_XEN
+ movl r28=XSI_PSR_I_ADDR
+ movl r29=XSI_PSR_IC
+ ;;
+ ld8 r28=[r28]
+ mov r30=1
+ ;;
+ st1 [r28]=r30
+ st4 [r29]=r0 // note: clears both vpsr.i and vpsr.ic!
+ ;;
+#else
+ rsm psr.i | psr.ic // M2 turn off interrupts and interruption collection
+#endif
+ cmp.eq p9,p0=r0,r0 // A set p9 to indicate that we should restore cr.ifs
+
+ ld8 r29=[r2],16 // M0|1 load cr.ipsr
+ ld8 r28=[r3],16 // M0|1 load cr.iip
+ mov r22=r0 // A clear r22
+ ;;
+ ld8 r30=[r2],16 // M0|1 load cr.ifs
+ ld8 r25=[r3],16 // M0|1 load ar.unat
+(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
+ ;;
+ ld8 r26=[r2],PT(B0)-PT(AR_PFS) // M0|1 load ar.pfs
+#ifdef CONFIG_XEN
+(pKStk) mov r21=r8
+(pKStk) XEN_HYPER_GET_PSR
+ ;;
+(pKStk) mov r22=r8
+(pKStk) mov r8=r21
+ ;;
+#else
+(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
+#endif
+ nop 0
+ ;;
+ ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
+ ld8 r27=[r3],PT(PR)-PT(AR_RSC) // M0|1 load ar.rsc
+ mov f6=f0 // F clear f6
+ ;;
+ ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT) // M0|1 load ar.rnat (may be garbage)
+ ld8 r31=[r3],PT(R1)-PT(PR) // M0|1 load predicates
+ mov f7=f0 // F clear f7
+ ;;
+ ld8 r20=[r2],PT(R12)-PT(AR_FPSR) // M0|1 load ar.fpsr
+ ld8.fill r1=[r3],16 // M0|1 load r1
+(pUStk) mov r17=1 // A
+ ;;
+(pUStk) st1 [r14]=r17 // M2|3
+ ld8.fill r13=[r3],16 // M0|1
+ mov f8=f0 // F clear f8
+ ;;
+ ld8.fill r12=[r2] // M0|1 restore r12 (sp)
+ ld8.fill r15=[r3] // M0|1 restore r15
+ mov b6=r18 // I0 restore b6
+
+ LOAD_PHYS_STACK_REG_SIZE(r17)
+ mov f9=f0 // F clear f9
+(pKStk) br.cond.dpnt.many skip_rbs_switch // B
+
+ srlz.d // M0 ensure interruption collection is off (for cover)
+ shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition
+#ifdef CONFIG_XEN
+ XEN_HYPER_COVER;
+#else
+ cover // B add current frame into dirty partition & set cr.ifs
+#endif
+ ;;
+ mov r19=ar.bsp // M2 get new backing store pointer
+ mov f10=f0 // F clear f10
+
+ nop.m 0
+ movl r14=__kernel_syscall_via_epc // X
+ ;;
+ mov.m ar.csd=r0 // M2 clear ar.csd
+ mov.m ar.ccv=r0 // M2 clear ar.ccv
+ mov b7=r14 // I0 clear b7 (hint with __kernel_syscall_via_epc)
+
+ mov.m ar.ssd=r0 // M2 clear ar.ssd
+ mov f11=f0 // F clear f11
+ br.cond.sptk.many rbs_switch // B
+#ifdef CONFIG_XEN
+END(xen_leave_syscall)
+#else
+END(ia64_leave_syscall)
+#endif
+
+#ifdef CONFIG_XEN
+GLOBAL_ENTRY(xen_leave_kernel)
+ BR_IF_NATIVE(__ia64_leave_kernel, r22, p7)
+#else
+GLOBAL_ENTRY(ia64_leave_kernel)
+#endif
+ PT_REGS_UNWIND_INFO(0)
+ /*
+ * work.need_resched etc. mustn't get changed by this CPU before it returns to
+ * user- or fsys-mode, hence we disable interrupts early on.
+ *
+ * p6 controls whether current_thread_info()->flags needs to be check for
+ * extra work. We always check for extra work when returning to user-level.
+ * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
+ * is 0. After extra work processing has been completed, execution
+ * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+ * needs to be redone.
+ */
+#ifdef CONFIG_PREEMPT
+ rsm psr.i // disable interrupts
+ cmp.eq p0,pLvSys=r0,r0 // pLvSys=0: leave from kernel
+(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
+ ;;
+ .pred.rel.mutex pUStk,pKStk
+(pKStk) ld4 r21=[r20] // r21 <- preempt_count
+(pUStk) mov r21=0 // r21 <- 0
+ ;;
+ cmp.eq p6,p0=r21,r0 // p6 <- pUStk || (preempt_count == 0)
+#else
+#ifdef CONFIG_XEN
+(pUStk) movl r17=XSI_PSR_I_ADDR
+(pUStk) mov r31=1
+ ;;
+(pUStk) ld8 r17=[r17]
+ ;;
+(pUStk) st1 [r17]=r31
+ ;;
+#else
+(pUStk) rsm psr.i
+#endif
+ cmp.eq p0,pLvSys=r0,r0 // pLvSys=0: leave from kernel
+(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
+#endif
+.work_processed_kernel:
+ adds r17=TI_FLAGS+IA64_TASK_SIZE,r13
+ ;;
+(p6) ld4 r31=[r17] // load current_thread_info()->flags
+ adds r21=PT(PR)+16,r12
+ ;;
+
+ lfetch [r21],PT(CR_IPSR)-PT(PR)
+ adds r2=PT(B6)+16,r12
+ adds r3=PT(R16)+16,r12
+ ;;
+ lfetch [r21]
+ ld8 r28=[r2],8 // load b6
+ adds r29=PT(R24)+16,r12
+
+ ld8.fill r16=[r3],PT(AR_CSD)-PT(R16)
+ adds r30=PT(AR_CCV)+16,r12
+(p6) and r19=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
+ ;;
+ ld8.fill r24=[r29]
+ ld8 r15=[r30] // load ar.ccv
+(p6) cmp4.ne.unc p6,p0=r19, r0 // any special work pending?
+ ;;
+ ld8 r29=[r2],16 // load b7
+ ld8 r30=[r3],16 // load ar.csd
+(p6) br.cond.spnt .work_pending
+ ;;
+ ld8 r31=[r2],16 // load ar.ssd
+ ld8.fill r8=[r3],16
+ ;;
+ ld8.fill r9=[r2],16
+ ld8.fill r10=[r3],PT(R17)-PT(R10)
+ ;;
+ ld8.fill r11=[r2],PT(R18)-PT(R11)
+ ld8.fill r17=[r3],16
+ ;;
+ ld8.fill r18=[r2],16
+ ld8.fill r19=[r3],16
+ ;;
+ ld8.fill r20=[r2],16
+ ld8.fill r21=[r3],16
+ mov ar.csd=r30
+ mov ar.ssd=r31
+ ;;
+#ifdef CONFIG_XEN
+ movl r23=XSI_PSR_I_ADDR
+ movl r22=XSI_PSR_IC
+ ;;
+ ld8 r23=[r23]
+ mov r25=1
+ ;;
+ st1 [r23]=r25
+ st4 [r22]=r0 // note: clears both vpsr.i and vpsr.ic!
+ ;;
+#else
+ rsm psr.i | psr.ic // initiate turning off of interrupt and interruption collection
+#endif
+ invala // invalidate ALAT
+ ;;
+ ld8.fill r22=[r2],24
+ ld8.fill r23=[r3],24
+ mov b6=r28
+ ;;
+ ld8.fill r25=[r2],16
+ ld8.fill r26=[r3],16
+ mov b7=r29
+ ;;
+ ld8.fill r27=[r2],16
+ ld8.fill r28=[r3],16
+ ;;
+ ld8.fill r29=[r2],16
+ ld8.fill r30=[r3],24
+ ;;
+ ld8.fill r31=[r2],PT(F9)-PT(R31)
+ adds r3=PT(F10)-PT(F6),r3
+ ;;
+ ldf.fill f9=[r2],PT(F6)-PT(F9)
+ ldf.fill f10=[r3],PT(F8)-PT(F10)
+ ;;
+ ldf.fill f6=[r2],PT(F7)-PT(F6)
+ ;;
+ ldf.fill f7=[r2],PT(F11)-PT(F7)
+ ldf.fill f8=[r3],32
+ ;;
+ srlz.d // ensure that inter. collection is off (VHPT is don't care, since text is pinned)
+ mov ar.ccv=r15
+ ;;
+ ldf.fill f11=[r2]
+#ifdef CONFIG_XEN
+ ;;
+ // r16-r31 all now hold bank1 values
+ mov r15=ar.unat
+ movl r2=XSI_BANK1_R16
+ movl r3=XSI_BANK1_R16+8
+ ;;
+.mem.offset 0,0; st8.spill [r2]=r16,16
+.mem.offset 8,0; st8.spill [r3]=r17,16
+ ;;
+.mem.offset 0,0; st8.spill [r2]=r18,16
+.mem.offset 8,0; st8.spill [r3]=r19,16
+ ;;
+.mem.offset 0,0; st8.spill [r2]=r20,16
+.mem.offset 8,0; st8.spill [r3]=r21,16
+ ;;
+.mem.offset 0,0; st8.spill [r2]=r22,16
+.mem.offset 8,0; st8.spill [r3]=r23,16
+ ;;
+.mem.offset 0,0; st8.spill [r2]=r24,16
+.mem.offset 8,0; st8.spill [r3]=r25,16
+ ;;
+.mem.offset 0,0; st8.spill [r2]=r26,16
+.mem.offset 8,0; st8.spill [r3]=r27,16
+ ;;
+.mem.offset 0,0; st8.spill [r2]=r28,16
+.mem.offset 8,0; st8.spill [r3]=r29,16
+ ;;
+.mem.offset 0,0; st8.spill [r2]=r30,16
+.mem.offset 8,0; st8.spill [r3]=r31,16
+ ;;
+ mov r3=ar.unat
+ movl r2=XSI_B1NAT
+ ;;
+ st8 [r2]=r3
+ mov ar.unat=r15
+ movl r2=XSI_BANKNUM;;
+ st4 [r2]=r0;
+#else
+ bsw.0 // switch back to bank 0 (no stop bit required beforehand...)
+#endif
+ ;;
+(pUStk) mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency)
+ adds r16=PT(CR_IPSR)+16,r12
+ adds r17=PT(CR_IIP)+16,r12
+
+#ifdef CONFIG_XEN
+(pKStk) mov r29=r8
+(pKStk) XEN_HYPER_GET_PSR
+ ;;
+(pKStk) mov r22=r8
+(pKStk) mov r8=r29
+ ;;
+#else
+(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
+#endif
+ nop.i 0
+ nop.i 0
+ ;;
+ ld8 r29=[r16],16 // load cr.ipsr
+ ld8 r28=[r17],16 // load cr.iip
+ ;;
+ ld8 r30=[r16],16 // load cr.ifs
+ ld8 r25=[r17],16 // load ar.unat
+ ;;
+ ld8 r26=[r16],16 // load ar.pfs
+ ld8 r27=[r17],16 // load ar.rsc
+ cmp.eq p9,p0=r0,r0 // set p9 to indicate that we should restore cr.ifs
+ ;;
+ ld8 r24=[r16],16 // load ar.rnat (may be garbage)
+ ld8 r23=[r17],16 // load ar.bspstore (may be garbage)
+ ;;
+ ld8 r31=[r16],16 // load predicates
+ ld8 r21=[r17],16 // load b0
+ ;;
+ ld8 r19=[r16],16 // load ar.rsc value for "loadrs"
+ ld8.fill r1=[r17],16 // load r1
+ ;;
+ ld8.fill r12=[r16],16
+ ld8.fill r13=[r17],16
+(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18
+ ;;
+ ld8 r20=[r16],16 // ar.fpsr
+ ld8.fill r15=[r17],16
+ ;;
+ ld8.fill r14=[r16],16
+ ld8.fill r2=[r17]
+(pUStk) mov r17=1
+ ;;
+ ld8.fill r3=[r16]
+(pUStk) st1 [r18]=r17 // restore current->thread.on_ustack
+ shr.u r18=r19,16 // get byte size of existing "dirty" partition
+ ;;
+ mov r16=ar.bsp // get existing backing store pointer
+ LOAD_PHYS_STACK_REG_SIZE(r17)
+(pKStk) br.cond.dpnt skip_rbs_switch
+
+ /*
+ * Restore user backing store.
+ *
+ * NOTE: alloc, loadrs, and cover can't be predicated.
+ */
+(pNonSys) br.cond.dpnt dont_preserve_current_frame
+
+#ifdef CONFIG_XEN
+ XEN_HYPER_COVER;
+#else
+ cover // add current frame into dirty partition and set cr.ifs
+#endif
+ ;;
+ mov r19=ar.bsp // get new backing store pointer
+rbs_switch:
+ sub r16=r16,r18 // krbs = old bsp - size of dirty partition
+ cmp.ne p9,p0=r0,r0 // clear p9 to skip restore of cr.ifs
+ ;;
+ sub r19=r19,r16 // calculate total byte size of dirty partition
+ add r18=64,r18 // don't force in0-in7 into memory...
+ ;;
+ shl r19=r19,16 // shift size of dirty partition into loadrs position
+ ;;
+dont_preserve_current_frame:
+ /*
+ * To prevent leaking bits between the kernel and user-space,
+ * we must clear the stacked registers in the "invalid" partition here.
+ * Not pretty, but at least it's fast (3.34 registers/cycle on Itanium,
+ * 5 registers/cycle on McKinley).
+ */
+# define pRecurse p6
+# define pReturn p7
+#ifdef CONFIG_ITANIUM
+# define Nregs 10
+#else
+# define Nregs 14
+#endif
+ alloc loc0=ar.pfs,2,Nregs-2,2,0
+ shr.u loc1=r18,9 // RNaTslots <= floor(dirtySize / (64*8))
+ sub r17=r17,r18 // r17 = (physStackedSize + 8) - dirtySize
+ ;;
+ mov ar.rsc=r19 // load ar.rsc to be used for "loadrs"
+ shladd in0=loc1,3,r17
+ mov in1=0
+ ;;
+ TEXT_ALIGN(32)
+rse_clear_invalid:
+#ifdef CONFIG_ITANIUM
+ // cycle 0
+ { .mii
+ alloc loc0=ar.pfs,2,Nregs-2,2,0
+ cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse
+ add out0=-Nregs*8,in0
+}{ .mfb
+ add out1=1,in1 // increment recursion count
+ nop.f 0
+ nop.b 0 // can't do br.call here because of alloc (WAW on CFM)
+ ;;
+}{ .mfi // cycle 1
+ mov loc1=0
+ nop.f 0
+ mov loc2=0
+}{ .mib
+ mov loc3=0
+ mov loc4=0
+(pRecurse) br.call.sptk.many b0=rse_clear_invalid
+
+}{ .mfi // cycle 2
+ mov loc5=0
+ nop.f 0
+ cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
+}{ .mib
+ mov loc6=0
+ mov loc7=0
+(pReturn) br.ret.sptk.many b0
+}
+#else /* !CONFIG_ITANIUM */
+ alloc loc0=ar.pfs,2,Nregs-2,2,0
+ cmp.lt pRecurse,p0=Nregs*8,in0 // if more than Nregs regs left to clear, (re)curse
+ add out0=-Nregs*8,in0
+ add out1=1,in1 // increment recursion count
+ mov loc1=0
+ mov loc2=0
+ ;;
+ mov loc3=0
+ mov loc4=0
+ mov loc5=0
+ mov loc6=0
+ mov loc7=0
+(pRecurse) br.call.dptk.few b0=rse_clear_invalid
+ ;;
+ mov loc8=0
+ mov loc9=0
+ cmp.ne pReturn,p0=r0,in1 // if recursion count != 0, we need to do a br.ret
+ mov loc10=0
+ mov loc11=0
+(pReturn) br.ret.dptk.many b0
+#endif /* !CONFIG_ITANIUM */
+# undef pRecurse
+# undef pReturn
+ ;;
+ alloc r17=ar.pfs,0,0,0,0 // drop current register frame
+ ;;
+ loadrs
+ ;;
+skip_rbs_switch:
+ mov ar.unat=r25 // M2
+(pKStk) extr.u r22=r22,21,1 // I0 extract current value of psr.pp from r22
+(pLvSys)mov r19=r0 // A clear r19 for leave_syscall, no-op otherwise
+ ;;
+(pUStk) mov ar.bspstore=r23 // M2
+(pKStk) dep r29=r22,r29,21,1 // I0 update ipsr.pp with psr.pp
+(pLvSys)mov r16=r0 // A clear r16 for leave_syscall, no-op otherwise
+ ;;
+#ifdef CONFIG_XEN
+ movl r25=XSI_IPSR
+ ;;
+ st8[r25]=r29,XSI_IFS_OFS-XSI_IPSR_OFS
+ ;;
+#else
+ mov cr.ipsr=r29 // M2
+#endif
+ mov ar.pfs=r26 // I0
+(pLvSys)mov r17=r0 // A clear r17 for leave_syscall, no-op otherwise
+
+#ifdef CONFIG_XEN
+(p9) st8 [r25]=r30
+ ;;
+ adds r25=XSI_IIP_OFS-XSI_IFS_OFS,r25
+ ;;
+#else
+(p9) mov cr.ifs=r30 // M2
+#endif
+ mov b0=r21 // I0
+(pLvSys)mov r18=r0 // A clear r18 for leave_syscall, no-op otherwise
+
+ mov ar.fpsr=r20 // M2
+#ifdef CONFIG_XEN
+ st8 [r25]=r28
+#else
+ mov cr.iip=r28 // M2
+#endif
+ nop 0
+ ;;
+(pUStk) mov ar.rnat=r24 // M2 must happen with RSE in lazy mode
+ nop 0
+(pLvSys)mov r2=r0
+
+ mov ar.rsc=r27 // M2
+ mov pr=r31,-1 // I0
+#ifdef CONFIG_XEN
+ ;;
+ XEN_HYPER_RFI;
+#else
+ rfi // B
+#endif
+
+ /*
+ * On entry:
+ * r20 = ¤t->thread_info->pre_count (if CONFIG_PREEMPT)
+ * r31 = current->thread_info->flags
+ * On exit:
+ * p6 = TRUE if work-pending-check needs to be redone
+ */
+.work_pending_syscall:
+ add r2=-8,r2
+ add r3=-8,r3
+ ;;
+ st8 [r2]=r8
+ st8 [r3]=r10
+.work_pending:
+ tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0?
+(p6) br.cond.sptk.few .notify
+#ifdef CONFIG_PREEMPT
+(pKStk) dep r21=-1,r0,PREEMPT_ACTIVE_BIT,1
+ ;;
+(pKStk) st4 [r20]=r21
+ ssm psr.i // enable interrupts
+#endif
+ br.call.spnt.many rp=schedule
+.ret9: cmp.eq p6,p0=r0,r0 // p6 <- 1
+#ifdef CONFIG_XEN
+ movl r2=XSI_PSR_I_ADDR
+ mov r20=1
+ ;;
+ ld8 r2=[r2]
+ ;;
+ st1 [r2]=r20
+#else
+ rsm psr.i // disable interrupts
+#endif
+ ;;
+#ifdef CONFIG_PREEMPT
+(pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
+ ;;
+(pKStk) st4 [r20]=r0 // preempt_count() <- 0
+#endif
+(pLvSys)br.cond.sptk.few .work_pending_syscall_end
+ br.cond.sptk.many .work_processed_kernel // re-check
+
+.notify:
+(pUStk) br.call.spnt.many rp=notify_resume_user
+.ret10: cmp.ne p6,p0=r0,r0 // p6 <- 0
+(pLvSys)br.cond.sptk.few .work_pending_syscall_end
+ br.cond.sptk.many .work_processed_kernel // don't re-check
+
+.work_pending_syscall_end:
+ adds r2=PT(R8)+16,r12
+ adds r3=PT(R10)+16,r12
+ ;;
+ ld8 r8=[r2]
+ ld8 r10=[r3]
+#ifdef CONFIG_XEN
+ br.cond.sptk.many xen_work_processed_syscall // re-check
+#else
+ br.cond.sptk.many .work_processed_syscall // re-check
+#endif
+
+#ifdef CONFIG_XEN
+END(xen_leave_kernel)
+#else
+END(ia64_leave_kernel)
+#endif
diff --git a/arch/ia64/xen/xenivt.S b/arch/ia64/xen/xenivt.S
new file mode 100644
index 0000000..f2eaa1f
--- /dev/null
+++ b/arch/ia64/xen/xenivt.S
@@ -0,0 +1,2204 @@
+/*
+ * arch/ia64/xen/ivt.S
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ * Dan Magenheimer <dan...@hp...>
+ */
+/*
+ * This file defines the interruption vector table used by the CPU.
+ * It does not include one entry per possible cause of interruption.
+ *
+ * The first 20 entries of the table contain 64 bundles each while the
+ * remaining 48 entries contain only 16 bundles each.
+ *
+ * The 64 bundles are used to allow inlining the whole handler for critical
+ * interruptions like TLB misses.
+ *
+ * For each entry, the comment is as follows:
+ *
+ * // 0x1c00 Entry 7 (size 64 bundles) Data Key Miss (12,51)
+ * entry offset ----/ / / / /
+ * entry number ---------/ / / /
+ * size of the entry -------------/ / /
+ * vector name -------------------------------------/ /
+ * interruptions triggering this vector ----------------------/
+ *
+ * The table is 32KB in size and must be aligned on 32KB boundary.
+ * (The CPU ignores the 15 lower bits of the address)
+ *
+ * Table is based upon EAS2.6 (Oct 1999)
+ */
+
+
+#include <asm/asmmacro.h>
+#include <asm/break.h>
+#include <asm/ia32.h>
+#include <asm/kregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+
+#ifdef CONFIG_XEN
+#define ia64_ivt xen_ivt
+#endif
+
+#if 1
+# define PSR_DEFAULT_BITS psr.ac
+#else
+# define PSR_DEFAULT_BITS 0
+#endif
+
+#if 0
+ /*
+ * This lets you track the last eight faults that occurred on the CPU. Make sure ar.k2 isn't
+ * needed for something else before enabling this...
+ */
+# define DBG_FAULT(i) mov r16=ar.k2;; shl r16=r16,8;; add r16=(i),r16;;mov ar.k2=r16
+#else
+# define DBG_FAULT(i)
+#endif
+
+#ifdef CONFIG_XEN
+#include "xenminstate.h"
+#else
+#include "minstate.h"
+#endif
+
+#define FAULT(n) \
+ mov r31=pr; \
+ mov r19=n;; /* prepare to save predicates */ \
+ br.sptk.many dispatch_to_fault_handler
+
+ .section .text.ivt,"ax"
+
+ .align 32768 // align on 32KB boundary
+ .global ia64_ivt
+ia64_ivt:
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x0000 Entry 0 (size 64 bundles) VHPT Translation (8,20,47)
+ENTRY(vhpt_miss)
+ DBG_FAULT(0)
+ /*
+ * The VHPT vector is invoked when the TLB entry for the virtual page table
+ * is missing. This happens only as a result of a previous
+ * (the "original") TLB miss, which may either be caused by an instruction
+ * fetch or a data access (or non-access).
+ *
+ * What we do here is normal TLB miss handing for the _original_ miss,
+ * followed by inserting the TLB entry for the virtual page table page
+ * that the VHPT walker was attempting to access. The latter gets
+ * inserted as long as page table entry above pte level have valid
+ * mappings for the faulting address. The TLB entry for the original
+ * miss gets inserted only if the pte entry indicates that the page is
+ * present.
+ *
+ * do_page_fault gets invoked in the following cases:
+ * - the faulting virtual address uses unimplemented address bits
+ * - the faulting virtual address has no valid page table mapping
+ */
+#ifdef CONFIG_XEN
+ movl r16=XSI_IFA
+ ;;
+ ld8 r16=[r16]
+#ifdef CONFIG_HUGETLB_PAGE
+ movl r18=PAGE_SHIFT
+ movl r25=XSI_ITIR
+ ;;
+ ld8 r25=[r25]
+#endif
+#else
+ mov r16=cr.ifa // get address that caused the TLB miss
+#ifdef CONFIG_HUGETLB_PAGE
+ movl r18=PAGE_SHIFT
+ mov r25=cr.itir
+#endif
+#endif
+ ;;
+#ifdef CONFIG_XEN
+ XEN_HYPER_RSM_PSR_DT;
+#else
+ rsm psr.dt // use physical addressing for data
+#endif
+ mov r31=pr // save the predicate registers
+ mov r19=IA64_KR(PT_BASE) // get page table base address
+ shl r21=r16,3 // shift bit 60 into sign bit
+ shr.u r17=r16,61 // get the region number into r17
+ ;;
+ shr.u r22=r21,3
+#ifdef CONFIG_HUGETLB_PAGE
+ extr.u r26=r25,2,6
+ ;;
+ cmp.ne p8,p0=r18,r26
+ sub r27=r26,r18
+ ;;
+(p8) dep r25=r18,r25,2,6
+(p8) shr r22=r22,r27
+#endif
+ ;;
+ cmp.eq p6,p7=5,r17 // is IFA pointing into to region 5?
+ shr.u r18=r22,PGDIR_SHIFT // get bottom portion of pgd index bit
+ ;;
+(p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place
+
+ srlz.d
+ LOAD_PHYSICAL(p6, r19, swapper_pg_dir) // region 5 is rooted at swapper_pg_dir
+
+ .pred.rel "mutex", p6, p7
+(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
+(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
+ ;;
+(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5
+(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4]
+ cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
+#ifdef CONFIG_PGTABLE_4
+ shr.u r28=r22,PUD_SHIFT // shift pud index into position
+#else
+ shr.u r18=r22,PMD_SHIFT // shift pmd index into position
+#endif
+ ;;
+ ld8 r17=[r17] // get *pgd (may be 0)
+ ;;
+(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL?
+#ifdef CONFIG_PGTABLE_4
+ dep r28=r28,r17,3,(PAGE_SHIFT-3) // r28=pud_offset(pgd,addr)
+ ;;
+ shr.u r18=r22,PMD_SHIFT // shift pmd index into position
+(p7) ld8 r29=[r28] // get *pud (may be 0)
+ ;;
+(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was pud_present(*pud) == NULL?
+ dep r17=r18,r29,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr)
+#else
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pgd,addr)
+#endif
+ ;;
+(p7) ld8 r20=[r17] // get *pmd (may be 0)
+ shr.u r19=r22,PAGE_SHIFT // shift pte index into position
+ ;;
+(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was pmd_present(*pmd) == NULL?
+ dep r21=r19,r20,3,(PAGE_SHIFT-3) // r21=pte_offset(pmd,addr)
+ ;;
+(p7) ld8 r18=[r21] // read *pte
+#ifdef CONFIG_XEN
+ movl r19=XSI_ISR
+ ;;
+ ld8 r19=[r19]
+#else
+ mov r19=cr.isr // cr.isr bit 32 tells us if this is an insn miss
+#endif
+ ;;
+(p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared?
+#ifdef CONFIG_XEN
+ movl r22=XSI_IHA
+ ;;
+ ld8 r22=[r22]
+#else
+ mov r22=cr.iha // get the VHPT address that caused the TLB miss
+#endif
+ ;; // avoid RAW on p7
+(p7) tbit.nz.unc p10,p11=r19,32 // is it an instruction TLB miss?
+ dep r23=0,r20,0,PAGE_SHIFT // clear low bits to get page address
+ ;;
+#ifdef CONFIG_XEN
+ mov r24=r8
+ mov r8=r18
+ ;;
+(p10) XEN_HYPER_ITC_I
+ ;;
+(p11) XEN_HYPER_ITC_D
+ ;;
+ mov r8=r24
+ ;;
+#else
+(p10) itc.i r18 // insert the instruction TLB entry
+(p11) itc.d r18 // insert the data TLB entry
+#endif
+(p6) br.cond.spnt.many page_fault // handle bad address/page not present (page fault)
+#ifdef CONFIG_XEN
+ movl r24=XSI_IFA
+ ;;
+ st8 [r24]=r22
+ ;;
+#ifdef CONFIG_HUGETLB_PAGE
+(p8) movl r24=XSI_ITIR
+ ;;
+(p8) st8 [r24]=r25
+#endif
+#else
+ mov cr.ifa=r22
+
+#ifdef CONFIG_HUGETLB_PAGE
+(p8) mov cr.itir=r25 // change to default page-size for VHPT
+#endif
+#endif
+
+ /*
+ * Now compute and insert the TLB entry for the virtual page table. We never
+ * execute in a page table page so there is no need to set the exception deferral
+ * bit.
+ */
+ adds r24=__DIRTY_BITS_NO_ED|_PAGE_PL_0|_PAGE_AR_RW,r23
+ ;;
+#ifdef CONFIG_XEN
+(p7) mov r25=r8
+(p7) mov r8=r24
+ ;;
+(p7) XEN_HYPER_ITC_D
+ ;;
+(p7) mov r8=r25
+ ;;
+#else
+(p7) itc.d r24
+#endif
+ ;;
+#ifdef CONFIG_SMP
+ /*
+ * Tell the assemblers dependency-violation checker that the above "itc" instructions
+ * cannot possibly affect the following loads:
+ */
+ dv_serialize_data
+
+ /*
+ * Re-check pagetable entry. If they changed, we may have received a ptc.g
+ * between reading the pagetable and the "itc". If so, flush the entry we
+ * inserted and retry. At this point, we have:
+ *
+ * r28 = equivalent of pud_offset(pgd, ifa)
+ * r17 = equivalent of pmd_offset(pud, ifa)
+ * r21 = equivalent of pte_offset(pmd, ifa)
+ *
+ * r29 = *pud
+ * r20 = *pmd
+ * r18 = *pte
+ */
+ ld8 r25=[r21] // read *pte again
+ ld8 r26=[r17] // read *pmd again
+#ifdef CONFIG_PGTABLE_4
+ ld8 r19=[r28] // read *pud again
+#endif
+ cmp.ne p6,p7=r0,r0
+ ;;
+ cmp.ne.or.andcm p6,p7=r26,r20 // did *pmd change
+#ifdef CONFIG_PGTABLE_4
+ cmp.ne.or.andcm p6,p7=r19,r29 // did *pud change
+#endif
+ mov r27=PAGE_SHIFT<<2
+ ;;
+(p6) ptc.l r22,r27 // purge PTE page translation
+(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did *pte change
+ ;;
+(p6) ptc.l r16,r27 // purge translation
+#endif
+
+ mov pr=r31,-1 // restore predicate registers
+#ifdef CONFIG_XEN
+ XEN_HYPER_RFI
+ dv_serialize_data
+#else
+ rfi
+#endif
+END(vhpt_miss)
+
+ .org ia64_ivt+0x400
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x0400 Entry 1 (size 64 bundles) ITLB (21)
+ENTRY(itlb_miss)
+ DBG_FAULT(1)
+ /*
+ * The ITLB handler accesses the PTE via the virtually mapped linear
+ * page table. If a nested TLB miss occurs, we switch into physical
+ * mode, walk the page table, and then re-execute the PTE read and
+ * go on normally after that.
+ */
+#ifdef CONFIG_XEN
+ movl r16=XSI_IFA
+ ;;
+ ld8 r16=[r16]
+#else
+ mov r16=cr.ifa // get virtual address
+#endif
+ mov r29=b0 // save b0
+ mov r31=pr // save predicates
+.itlb_fault:
+#ifdef CONFIG_XEN
+ movl r17=XSI_IHA
+ ;;
+ ld8 r17=[r17] // get virtual address of L3 PTE
+#else
+ mov r17=cr.iha // get virtual address of PTE
+#endif
+ movl r30=1f // load nested fault continuation point
+ ;;
+1: ld8 r18=[r17] // read *pte
+ ;;
+ mov b0=r29
+ tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared?
+(p6) br.cond.spnt page_fault
+ ;;
+#ifdef CONFIG_XEN
+ mov r19=r8
+ mov r8=r18
+ ;;
+ XEN_HYPER_ITC_I
+ ;;
+ mov r8=r19
+#else
+ itc.i r18
+#endif
+ ;;
+#ifdef CONFIG_SMP
+ /*
+ * Tell the assemblers dependency-violation checker that the above "itc" instructions
+ * cannot possibly affect the following loads:
+ */
+ dv_serialize_data
+
+ ld8 r19=[r17] // read *pte again and see if same
+ mov r20=PAGE_SHIFT<<2 // setup page size for purge
+ ;;
+ cmp.ne p7,p0=r18,r19
+ ;;
+(p7) ptc.l r16,r20
+#endif
+ mov pr=r31,-1
+#ifdef CONFIG_XEN
+ XEN_HYPER_RFI
+ dv_serialize_data
+#else
+ rfi
+#endif
+END(itlb_miss)
+
+ .org ia64_ivt+0x0800
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x0800 Entry 2 (size 64 bundles) DTLB (9,48)
+ENTRY(dtlb_miss)
+ DBG_FAULT(2)
+ /*
+ * The DTLB handler accesses the PTE via the virtually mapped linear
+ * page table. If a nested TLB miss occurs, we switch into physical
+ * mode, walk the page table, and then re-execute the PTE read and
+ * go on normally after that.
+ */
+#ifdef CONFIG_XEN
+ movl r16=XSI_IFA
+ ;;
+ ld8 r16=[r16]
+#else
+ mov r16=cr.ifa // get virtual address
+#endif
+ mov r29=b0 // save b0
+ mov r31=pr // save predicates
+dtlb_fault:
+#ifdef CONFIG_XEN
+ movl r17=XSI_IHA
+ ;;
+ ld8 r17=[r17] // get virtual address of L3 PTE
+#else
+ mov r17=cr.iha // get virtual address of PTE
+#endif
+ movl r30=1f // load nested fault continuation point
+ ;;
+1: ld8 r18=[r17] // read *pte
+ ;;
+ mov b0=r29
+ tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared?
+(p6) br.cond.spnt page_fault
+ ;;
+#ifdef CONFIG_XEN
+ mov r19=r8
+ mov r8=r18
+ ;;
+ XEN_HYPER_ITC_D
+ ;;
+ mov r8=r19
+ ;;
+#else
+ itc.d r18
+#endif
+ ;;
+#ifdef CONFIG_SMP
+ /*
+ * Tell the assemblers dependency-violation checker that the above "itc" instructions
+ * cannot possibly affect the following loads:
+ */
+ dv_serialize_data
+
+ ld8 r19=[r17] // read *pte again and see if same
+ mov r20=PAGE_SHIFT<<2 // setup page size for purge
+ ;;
+ cmp.ne p7,p0=r18,r19
+ ;;
+(p7) ptc.l r16,r20
+#endif
+ mov pr=r31,-1
+#ifdef CONFIG_XEN
+ XEN_HYPER_RFI
+ dv_serialize_data
+#else
+ rfi
+#endif
+END(dtlb_miss)
+
+ .org ia64_ivt+0x0c00
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x0c00 Entry 3 (size 64 bundles) Alt ITLB (19)
+ENTRY(alt_itlb_miss)
+ DBG_FAULT(3)
+#ifdef CONFIG_XEN
+ movl r31=XSI_IPSR
+ ;;
+ ld8 r21=[r31],XSI_IFA_OFS-XSI_IPSR_OFS // get ipsr, point to ifa
+ movl r17=PAGE_KERNEL
+ ;;
+ ld8 r16=[r31] // get ifa
+#else
+ mov r16=cr.ifa // get address that caused the TLB miss
+ movl r17=PAGE_KERNEL
+ mov r21=cr.ipsr
+#endif
+ movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
+ mov r31=pr
+ ;;
+#ifdef CONFIG_DISABLE_VHPT
+ shr.u r22=r16,61 // get the region number into r21
+ ;;
+ cmp.gt p8,p0=6,r22 // user mode
+ ;;
+#ifdef CONFIG_XEN
+ //XXX notyet
+#else
+(p8) thash r17=r16
+ ;;
+(p8) mov cr.iha=r17
+#endif
+(p8) mov r29=b0 // save b0
+(p8) br.cond.dptk .itlb_fault
+#endif
+ extr.u r23=r21,IA64_PSR_CPL0_BIT,2 // extract psr.cpl
+ and r19=r19,r16 // clear ed, reserved bits, and PTE control bits
+ shr.u r18=r16,57 // move address bit 61 to bit 4
+ ;;
+ andcm r18=0x10,r18 // bit 4=~address-bit(61)
+ cmp.ne p8,p0=r0,r23 // psr.cpl != 0?
+ or r19=r17,r19 // insert PTE control bits into r19
+ ;;
+ or r19=r19,r18 // set bit 4 (uncached) if the access was to region 6
+(p8) br.cond.spnt page_fault
+ ;;
+#ifdef CONFIG_XEN
+ mov r18=r8
+ mov r8=r19
+ ;;
+ XEN_HYPER_ITC_I
+ ;;
+ mov r8=r18
+ ;;
+ mov pr=r31,-1
+ ;;
+ XEN_HYPER_RFI;
+#else
+ itc.i r19 // insert the TLB entry
+ mov pr=r31,-1
+ rfi
+#endif
+END(alt_itlb_miss)
+
+ .org ia64_ivt+0x1000
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x1000 Entry 4 (size 64 bundles) Alt DTLB (7,46)
+ENTRY(alt_dtlb_miss)
+ DBG_FAULT(4)
+#ifdef CONFIG_XEN
+ movl r31=XSI_IPSR
+ ;;
+ ld8 r21=[r31],XSI_ISR_OFS-XSI_IPSR_OFS // get ipsr, point to isr
+ movl r17=PAGE_KERNEL
+ ;;
+ ld8 r20=[r31],XSI_IFA_OFS-XSI_ISR_OFS // get isr, point to ifa
+ movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
+ ;;
+ ld8 r16=[r31] // get ifa
+#else
+ mov r16=cr.ifa // get address that caused the TLB miss
+ movl r17=PAGE_KERNEL
+ mov r20=cr.isr
+ movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
+ mov r21=cr.ipsr
+#endif
+ mov r31=pr
+ mov r24=PERCPU_ADDR
+ ;;
+#ifdef CONFIG_DISABLE_VHPT
+ shr.u r22=r16,61 // get the region number into r21
+ ;;
+ cmp.gt p8,p0=6,r22 // access to region 0-5
+ ;;
+#ifdef CONFIG_XEN
+ //XXX notyet
+#else
+(p8) thash r17=r16
+ ;;
+(p8) mov cr.iha=r17
+#endif
+(p8) mov r29=b0 // save b0
+(p8) br.cond.dptk dtlb_fault
+#endif
+ cmp.ge p10,p11=r16,r24 // access to per_cpu_data?
+ tbit.z p12,p0=r16,61 // access to region 6?
+ mov r25=PERCPU_PAGE_SHIFT << 2
+ mov r26=PERCPU_PAGE_SIZE
+ nop.m 0
+ nop.b 0
+ ;;
+(p10) mov r19=IA64_KR(PER_CPU_DATA)
+(p11) and r19=r19,r16 // clear non-ppn fields
+ extr.u r23=r21,IA64_PSR_CPL0_BIT,2 // extract psr.cpl
+ and r22=IA64_ISR_CODE_MASK,r20 // get the isr.code field
+ tbit.nz p6,p7=r20,IA64_ISR_SP_BIT // is speculation bit on?
+ tbit.nz p9,p0=r20,IA64_ISR_NA_BIT // is non-access bit on?
+ ;;
+(p10) sub r19=r19,r26
+#ifdef CONFIG_XEN
+(p10) movl r24=XSI_ITIR
+ ;;
+(p10) st8 [r24]=r25
+#else
+(p10) mov cr.itir=r25
+#endif
+ cmp.ne p8,p0=r0,r23
+(p9) cmp.eq.or.andcm p6,p7=IA64_ISR_CODE_LFETCH,r22 // check isr.code field
+(p12) dep r17=-1,r17,4,1 // set ma=UC for region 6 addr
+(p8) br.cond.spnt page_fault
+
+ dep r21=-1,r21,IA64_PSR_ED_BIT,1
+ ;;
+ or r19=r19,r17 // insert PTE control bits into r19
+(p6) mov cr.ipsr=r21
+ ;;
+#ifdef CONFIG_XEN
+(p7) mov r18=r8
+(p7) mov r8=r19
+ ;;
+(p7) XEN_HYPER_ITC_D
+ ;;
+(p7) mov r8=r18
+ ;;
+ mov pr=r31,-1
+ ;;
+ XEN_HYPER_RFI;
+#else
+(p7) itc.d r19 // insert the TLB entry
+ mov pr=r31,-1
+ rfi
+#endif
+END(alt_dtlb_miss)
+
+ .org ia64_ivt+0x1400
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x1400 Entry 5 (size 64 bundles) Data nested TLB (6,45)
+ENTRY(nested_dtlb_miss)
+ /*
+ * In the absence of kernel bugs, we get here when the virtually mapped linear
+ * page table is accessed non-speculatively (e.g., in the Dirty-bit, Instruction
+ * Access-bit, or Data Access-bit faults). If the DTLB entry for the virtual page
+ * table is missing, a nested TLB miss fault is triggered and control is
+ * transferred to this point. When this happens, we lookup the pte for the
+ * faulting address by walking the page table in physical mode and return to the
+ * continuation point passed in register r30 (or call page_fault if the address is
+ * not mapped).
+ *
+ * Input: r16: faulting address
+ * r29: saved b0
+ * r30: continuation address
+ * r31: saved pr
+ *
+ * Output: r17: physical address of PTE of faulting address
+ * r29: saved b0
+ * r30: continuation address
+ * r31: saved pr
+ *
+ * Clobbered: b0, r18, r19, r21, r22, psr.dt (cleared)
+ */
+#ifdef CONFIG_XEN
+ XEN_HYPER_RSM_PSR_DT;
+#else
+ rsm psr.dt // switch to using physical data addressing
+#endif
+ mov r19=IA64_KR(PT_BASE) // get the page table base address
+ shl r21=r16,3 // shift bit 60 into sign bit
+#ifdef CONFIG_XEN
+ movl r18=XSI_ITIR
+ ;;
+ ld8 r18=[r18]
+#else
+ mov r18=cr.itir
+#endif
+ ;;
+ shr.u r17=r16,61 // get the region number into r17
+ extr.u r18=r18,2,6 // get the faulting page size
+ ;;
+ cmp.eq p6,p7=5,r17 // is faulting address in region 5?
+ add r22=-PAGE_SHIFT,r18 // adjustment for hugetlb address
+ add r18=PGDIR_SHIFT-PAGE_SHIFT,r18
+ ;;
+ shr.u r22=r16,r22
+ shr.u r18=r16,r18
+(p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place
+
+ srlz.d
+ LOAD_PHYSICAL(p6, r19, swapper_pg_dir) // region 5 is rooted at swapper_pg_dir
+
+ .pred.rel "mutex", p6, p7
+(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
+(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
+ ;;
+(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5
+(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4]
+ cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
+#ifdef CONFIG_PGTABLE_4
+ shr.u r18=r22,PUD_SHIFT // shift pud index into position
+#else
+ shr.u r18=r22,PMD_SHIFT // shift pmd index into position
+#endif
+ ;;
+ ld8 r17=[r17] // get *pgd (may be 0)
+ ;;
+(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL?
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=p[u|m]d_offset(pgd,addr)
+ ;;
+#ifdef CONFIG_PGTABLE_4
+(p7) ld8 r17=[r17] // get *pud (may be 0)
+ shr.u r18=r22,PMD_SHIFT // shift pmd index into position
+ ;;
+(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pud_present(*pud) == NULL?
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr)
+ ;;
+#endif
+(p7) ld8 r17=[r17] // get *pmd (may be 0)
+ shr.u r19=r22,PAGE_SHIFT // shift pte index into position
+ ;;
+(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pmd_present(*pmd) == NULL?
+ dep r17=r19,r17,3,(PAGE_SHIFT-3) // r17=pte_offset(pmd,addr);
+(p6) br.cond.spnt page_fault
+ mov b0=r30
+ br.sptk.many b0 // return to continuation point
+END(nested_dtlb_miss)
+
+ .org ia64_ivt+0x1800
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x1800 Entry 6 (size 64 bundles) Instruction Key Miss (24)
+ENTRY(ikey_miss)
+ DBG_FAULT(6)
+ FAULT(6)
+END(ikey_miss)
+
+ //-----------------------------------------------------------------------------------
+ // call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
+ENTRY(page_fault)
+#ifdef CONFIG_XEN
+ XEN_HYPER_SSM_PSR_DT
+#else
+ ssm psr.dt
+ ;;
+ srlz.i
+#endif
+ ;;
+ SAVE_MIN_WITH_COVER
+ alloc r15=ar.pfs,0,0,3,0
+#ifdef CONFIG_XEN
+ movl r3=XSI_ISR
+ ;;
+ ld8 out1=[r3],XSI_IFA_OFS-XSI_ISR_OFS // get vcr.isr, point to ifa
+ ;;
+ ld8 out0=[r3] // get vcr.ifa
+ mov r14=1
+ ;;
+ add r3=XSI_PSR_IC_OFS-XSI_IFA_OFS, r3 // point to vpsr.ic
+ ;;
+ st4 [r3]=r14 // vpsr.ic = 1
+ adds r3=8,r2 // set up second base pointer
+ ;;
+#else
+ mov out0=cr.ifa
+ mov out1=cr.isr
+ adds r3=8,r2 // set up second base pointer
+ ;;
+ ssm psr.ic | PSR_DEFAULT_BITS
+ ;;
+ srlz.i // guarantee that interruption collectin is on
+ ;;
+#endif
+#ifdef CONFIG_XEN
+
+#define MASK_TO_PEND_OFS (-1)
+
+(p15) movl r14=XSI_PSR_I_ADDR
+ ;;
+(p15) ld8 r14=[r14]
+ ;;
+(p15) st1 [r14]=r0,MASK_TO_PEND_OFS // if (p15) vpsr.i = 1
+ ;; // if (p15) (vcpu->vcpu_info->evtchn_upcall_mask)=0
+(p15) ld1 r14=[r14] // if (vcpu->vcpu_info->evtchn_upcall_pending)
+ ;;
+(p15) cmp.ne p15,p0=r14,r0
+ ;;
+(p15) XEN_HYPER_SSM_I
+#else
+(p15) ssm psr.i // restore psr.i
+#endif
+ movl r14=ia64_leave_kernel
+ ;;
+ SAVE_REST
+ mov rp=r14
+ ;;
+ adds out2=16,r12 // out2 = pointer to pt_regs
+ br.call.sptk.many b6=ia64_do_page_fault // ignore return address
+END(page_fault)
+
+ .org ia64_ivt+0x1c00
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x1c00 Entry 7 (size 64 bundles) Data Key Miss (12,51)
+ENTRY(dkey_miss)
+ DBG_FAULT(7)
+ FAULT(7)
+END(dkey_miss)
+
+ .org ia64_ivt+0x2000
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x2000 Entry 8 (size 64 bundles) Dirty-bit (54)
+ENTRY(dirty_bit)
+ DBG_FAULT(8)
+ /*
+ * What we do here is to simply turn on the dirty bit in the PTE. We need to
+ * update both the page-table and the TLB entry. To efficiently access the PTE,
+ * we address it through the virtual page table. Most likely, the TLB entry for
+ * the relevant virtual page table page is still present in the TLB so we can
+ * normally do this without additional TLB misses. In case the necessary virtual
+ * page table TLB entry isn't present, we take a nested TLB miss hit where we look
+ * up the physical address of the L3 PTE and then continue at label 1 below.
+ */
+#ifdef CONFIG_XEN
+ movl r16=XSI_IFA
+ ;;
+ ld8 r16=[r16]
+ ;;
+#else
+ mov r16=cr.ifa // get the address that caused the fault
+#endif
+ movl r30=1f // load continuation point in case of nested fault
+ ;;
+#ifdef CONFIG_XEN
+ mov r18=r8;
+ mov r8=r16;
+ XEN_HYPER_THASH;;
+ mov r17=r8;
+ mov r8=r18;;
+#else
+ thash r17=r16 // compute virtual address of L3 PTE
+#endif
+ mov r29=b0 // save b0 in case of nested fault
+ mov r31=pr // save pr
+#ifdef CONFIG_SMP
+ mov r28=ar.ccv // save ar.ccv
+ ;;
+1: ld8 r18=[r17]
+ ;; // avoid RAW on r18
+ mov ar.ccv=r18 // set compare value for cmpxchg
+ or r25=_PAGE_D|_PAGE_A,r18 // set the dirty and accessed bits
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
+ ;;
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only update if page is present
+ mov r24=PAGE_SHIFT<<2
+ ;;
+(p6) cmp.eq p6,p7=r26,r18 // Only compare if page is present
+ ;;
+#ifdef CONFIG_XEN
+(p6) mov r18=r8
+(p6) mov r8=r25
+ ;;
+(p6) XEN_HYPER_ITC_D
+ ;;
+(p6) mov r8=r18
+#else
+(p6) itc.d r25 // install updated PTE
+#endif
+ ;;
+ /*
+ * Tell the assemblers dependency-violation checker that the above "itc" instructions
+ * cannot possibly affect the following loads:
+ */
+ dv_serialize_data
+
+ ld8 r18=[r17] // read PTE again
+ ;;
+ cmp.eq p6,p7=r18,r25 // is it same as the newly installed
+ ;;
+(p7) ptc.l r16,r24
+ mov b0=r29 // restore b0
+ mov ar.ccv=r28
+#else
+ ;;
+1: ld8 r18=[r17]
+ ;; // avoid RAW on r18
+ or r18=_PAGE_D|_PAGE_A,r18 // set the dirty and accessed bits
+ mov b0=r29 // restore b0
+ ;;
+ st8 [r17]=r18 // store back updated PTE
+ itc.d r18 // install updated PTE
+#endif
+ mov pr=r31,-1 // restore pr
+#ifdef CONFIG_XEN
+ XEN_HYPER_RFI
+ dv_serialize_data
+#else
+ rfi
+#endif
+END(dirty_bit)
+
+ .org ia64_ivt+0x2400
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x2400 Entry 9 (size 64 bundles) Instruction Access-bit (27)
+ENTRY(iaccess_bit)
+ DBG_FAULT(9)
+ // Like Entry 8, except for instruction access
+#ifdef CONFIG_XEN
+ movl r16=XSI_IFA
+ ;;
+ ld8 r16=[r16]
+ ;;
+#else
+ mov r16=cr.ifa // get the address that caused the fault
+#endif
+ movl r30=1f // load continuation point in case of nested fault
+ mov r31=pr // save predicates
+#ifdef CONFIG_ITANIUM
+ /*
+ * Erratum 10 (IFA may contain incorrect address) has "NoFix" status.
+ */
+ mov r17=cr.ipsr
+ ;;
+ mov r18=cr.iip
+ tbit.z p6,p0=r17,IA64_PSR_IS_BIT // IA64 instruction set?
+ ;;
+(p6) mov r16=r18 // if so, use cr.iip instead of cr.ifa
+#endif /* CONFIG_ITANIUM */
+ ;;
+#ifdef CONFIG_XEN
+ mov r18=r8;
+ mov r8=r16;
+ XEN_HYPER_THASH;;
+ mov r17=r8;
+ mov r8=r18;;
+#else
+ thash r17=r16 // compute virtual address of L3 PTE
+#endif
+ mov r29=b0 // save b0 in case of nested fault)
+#ifdef CONFIG_SMP
+ mov r28=ar.ccv // save ar.ccv
+ ;;
+1: ld8 r18=[r17]
+ ;;
+ mov ar.ccv=r18 // set compare value for cmpxchg
+ or r25=_PAGE_A,r18 // set the accessed bit
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
+ ;;
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page present
+ mov r24=PAGE_SHIFT<<2
+ ;;
+(p6) cmp.eq p6,p7=r26,r18 // Only if page present
+ ;;
+#ifdef CONFIG_XEN
+ mov r26=r8
+ mov r8=r25
+ ;;
+(p6) XEN_HYPER_ITC_I
+ ;;
+ mov r8=r26
+ ;;
+#else
+(p6) itc.i r25 // install updated PTE
+#endif
+ ;;
+ /*
+ * Tell the assemblers dependency-violation checker that the above "itc" instructions
+ * cannot possibly affect the following loads:
+ */
+ dv_serialize_data
+
+ ld8 r18=[r17] // read PTE again
+ ;;
+ cmp.eq p6,p7=r18,r25 // is it same as the newly installed
+ ;;
+(p7) ptc.l r16,r24
+ mov b0=r29 // restore b0
+ mov ar.ccv=r28
+#else /* !CONFIG_SMP */
+ ;;
+1: ld8 r18=[r17]
+ ;;
+ or r18=_PAGE_A,r18 // set the accessed bit
+ mov b0=r29 // restore b0
+ ;;
+ st8 [r17]=r18 // store back updated PTE
+ itc.i r18 // install updated PTE
+#endif /* !CONFIG_SMP */
+ mov pr=r31,-1
+#ifdef CONFIG_XEN
+ XEN_HYPER_RFI
+ dv_serialize_data
+#else
+ rfi
+#endif
+END(iaccess_bit)
+
+ .org ia64_ivt+0x2800
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x2800 Entry 10 (size 64 bundles) Data Access-bit (15,55)
+ENTRY(daccess_bit)
+ DBG_FAULT(10)
+ // Like Entry 8, except for data access
+#ifdef CONFIG_XEN
+ movl r16=XSI_IFA
+ ;;
+ ld8 r16=[r16]
+ ;;
+#else
+ mov r16=cr.ifa // get the address that caused the fault
+#endif
+ movl r30=1f // load continuation point in case of nested fault
+ ;;
+#ifdef CONFIG_XEN
+ mov r18=r8
+ mov r8=r16
+ XEN_HYPER_THASH
+ ;;
+ mov r17=r8
+ mov r8=r18
+ ;;
+#else
+ thash r17=r16 // compute virtual address of L3 PTE
+#endif
+ mov r31=pr
+ mov r29=b0 // save b0 in case of nested fault)
+#ifdef CONFIG_SMP
+ mov r28=ar.ccv // save ar.ccv
+ ;;
+1: ld8 r18=[r17]
+ ;; // avoid RAW on r18
+ mov ar.ccv=r18 // set compare value for cmpxchg
+ or r25=_PAGE_A,r18 // set the dirty bit
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
+ ;;
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page is present
+ mov r24=PAGE_SHIFT<<2
+ ;;
+(p6) cmp.eq p6,p7=r26,r18 // Only if page is present
+ ;;
+#ifdef CONFIG_XEN
+ mov r26=r8
+ mov r8=r25
+ ;;
+(p6) XEN_HYPER_ITC_D
+ ;;
+ mov r8=r26
+ ;;
+#else
+(p6) itc.d r25 // install updated PTE
+#endif
+ /*
+ * Tell the assemblers dependency-violation checker that the above "itc" instructions
+ * cannot possibly affect the following loads:
+ */
+ dv_serialize_data
+ ;;
+ ld8 r18=[r17] // read PTE again
+ ;;
+ cmp.eq p6,p7=r18,r25 // is it same as the newly installed
+ ;;
+(p7) ptc.l r16,r24
+ mov ar.ccv=r28
+#else
+ ;;
+1: ld8 r18=[r17]
+ ;; // avoid RAW on r18
+ or r18=_PAGE_A,r18 // set the accessed bit
+ ;;
+ st8 [r17]=r18 // store back updated PTE
+ itc.d r18 // install updated PTE
+#endif
+ mov b0=r29 // restore b0
+ mov pr=r31,-1
+#ifdef CONFIG_XEN
+ XEN_HYPER_RFI
+ dv_serialize_data
+#else
+ rfi
+#endif
+END(daccess_bit)
+
+ .org ia64_ivt+0x2c00
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x2c00 Entry 11 (size 64 bundles) Break instruction (33)
+ENTRY(break_fault)
+ /*
+ * The streamlined system call entry/exit paths only save/restore the initial part
+ * of pt_regs. This implies that the callers of system-calls must adhere to the
+ * normal procedure calling conventions.
+ *
+ * Registers to be saved & restored:
+ * CR registers: cr.ipsr, cr.iip, cr.ifs
+ * AR registers: ar.unat, ar.pfs, ar.rsc, ar.rnat, ar.bspstore, ar.fpsr
+ * others: pr, b0, b6, loadrs, r1, r11, r12, r13, r15
+ * Registers to be restored only:
+ * r8-r11: output value from the system call.
+ *
+ * During system call exit, scratch registers (including r15) are modified/cleared
+ * to prevent leaking bits from kernel to user level.
+ */
+ DBG_FAULT(11)
+ mov.m r16=IA64_KR(CURRENT) // M2 r16 <- current task (12 cyc)
+#ifdef CONFIG_XEN
+ movl r22=XSI_IPSR
+ ;;
+ ld8 r29=[r22],XSI_IIM_OFS-XSI_IPSR_OFS // get ipsr, point to iip
+#else
+ mov r29=cr.ipsr // M2 (12 cyc)
+#endif
+ mov r31=pr // I0 (2 cyc)
+
+#ifdef CONFIG_XEN
+ ;;
+ ld8 r17=[r22],XSI_IIP_OFS-XSI_IIM_OFS
+#else
+ mov r17=cr.iim // M2 (2 cyc)
+#endif
+ mov.m r27=ar.rsc // M2 (12 cyc)
+ mov r18=__IA64_BREAK_SYSCALL // A
+
+ mov.m ar.rsc=0 // M2
+ mov.m r21=ar.fpsr // M2 (12 cyc)
+ mov r19=b6 // I0 (2 cyc)
+ ;;
+ mov.m r23=ar.bspstore // M2 (12 cyc)
+ mov.m r24=ar.rnat // M2 (5 cyc)
+ mov.i r26=ar.pfs // I0 (2 cyc)
+
+ invala // M0|1
+ nop.m 0 // M
+ mov r20=r1 // A save r1
+
+ nop.m 0
+ movl r30=sys_call_table // X
+
+#ifdef CONFIG_XEN
+ ld8 r28=[r22]
+#else
+ mov r28=cr.iip // M2 (2 cyc)
+#endif
+ cmp.eq p0,p7=r18,r17 // I0 is this a system call?
+(p7) br.cond.spnt non_syscall // B no ->
+ //
+ // From this point on, we are definitely on the syscall-path
+ // and we can use (non-banked) scratch registers.
+ //
+///////////////////////////////////////////////////////////////////////
+ mov r1=r16 // A move task-pointer to "addl"-addressable reg
+ mov r2=r16 // A setup r2 for ia64_syscall_setup
+ add r9=TI_FLAGS+IA64_TASK_SIZE,r16 // A r9 = ¤t_thread_info()->flags
+
+ adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16
+ adds r15=-1024,r15 // A subtract 1024 from syscall number
+ mov r3=NR_syscalls - 1
+ ;;
+ ld1.bias r17=[r16] // M0|1 r17 = current->thread.on_ustack flag
+ ld4 r9=[r9] // M0|1 r9 = current_thread_info()->flags
+ extr.u r8=r29,41,2 // I0 extract ei field from cr.ipsr
+
+ shladd r30=r15,3,r30 // A r30 = sys_call_table + 8*(syscall-1024)
+ addl r22=IA64_RBS_OFFSET,r1 // A compute base of RBS
+ cmp.leu p6,p7=r15,r3 // A syscall number in range?
+ ;;
+
+ lfetch.fault.excl.nt1 [r22] // M0|1 prefetch RBS
+(p6) ld8 r30=[r30] // M0|1 load address of syscall entry point
+ tnat.nz.or p7,p0=r15 // I0 is syscall nr a NaT?
+
+ mov.m ar.bspstore=r22 // M2 switch to kernel RBS
+ cmp.eq p8,p9=2,r8 // A isr.ei==2?
+ ;;
+
+(p8) mov r8=0 // A clear ei to 0
+(p7) movl r30=sys_ni_syscall // X
+
+(p8) adds r28=16,r28 // A switch cr.iip to next bundle
+(p9) adds r8=1,r8 // A increment ei to next slot
+ nop.i 0
+ ;;
+
+ mov.m r25=ar.unat // M2 (5 cyc)
+ dep r29=r8,r29,41,2 // I0 insert new ei into cr.ipsr
+ adds r15=1024,r15 // A restore original syscall number
+ //
+ // If any of the above loads miss in L1D, we'll stall here until
+ // the data arrives.
+ //
+///////////////////////////////////////////////////////////////////////
+ st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag
+ mov b6=r30 // I0 setup syscall handler branch reg early
+ cmp.eq pKStk,pUStk=r0,r17 // A were we on kernel stacks already?
+
+ and r9=_TIF_SYSCALL_TRACEAUDIT,r9 // A mask trace or audit
+ mov r18=ar.bsp // M2 (12 cyc)
+(pKStk) br.cond.spnt .break_fixup // B we're already in kernel-mode -- fix up RBS
+ ;;
+.back_from_break_fixup:
+(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1 // A compute base of memory stack
+ cmp.eq p14,p0=r9,r0 // A are syscalls being traced/audited?
+ br.call.sptk.many b7=ia64_syscall_setup // B
+1:
+ mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0
+ nop 0
+#ifdef CONFIG_XEN
+ mov r2=b0; br.call.sptk b0=xen_bsw1;; mov b0=r2;;
+#else
+ bsw.1 // B (6 cyc) regs are saved, switch to bank 1
+#endif
+ ;;
+
+#ifdef CONFIG_XEN
+ movl r16=XSI_PSR_IC
+ mov r3=1
+ ;;
+ st4 [r16]=r3,XSI_PSR_I_ADDR_OFS-XSI_PSR_IC_OFS // vpsr.ic = 1
+#else
+ ssm psr.ic | PSR_DEFAULT_BITS // M2 now it's safe to re-enable intr.-collection
+#endif
+ movl r3=ia64_ret_from_syscall // X
+ ;;
+
+ srlz.i // M0 ensure interruption collection is on
+ mov rp=r3 // I0 set the real return addr
+(p10) br.cond.spnt.many ia64_ret_from_syscall // B return if bad call-frame or r15 is a NaT
+
+#ifdef CONFIG_XEN
+(p15) ld8 r16=[r16] // vpsr.i
+ ;;
+(p15) st1 [r16]=r0,MASK_TO_PEND_OFS // if (p15) vpsr.i = 1
+ ;; // if (p15) (vcpu->vcpu_info->evtchn_upcall_mask)=0
+(p15) ld1 r2=[r16] // if (vcpu->vcpu_info->evtchn_upcall_pending)
+ ;;
+(p15) cmp.ne.unc p6,p0=r2,r0
+ ;;
+(p6) XEN_HYPER_SSM_I // do a real ssm psr.i
+#else
+(p15) ssm psr.i // M2 restore psr.i
+#endif
+(p14) br.call.sptk.many b6=b6 // B invoke syscall-handker (ignore return addr)
+ br.cond.spnt.many ia64_trace_syscall // B do syscall-tracing thingamagic
+ // NOT REACHED
+///////////////////////////////////////////////////////////////////////
+ // On entry, we optimistically assumed that we're coming from user-space.
+ // For the rare cases where a system-call is done from within the kernel,
+ // we fix things up at this point:
+.break_fixup:
+ add r1=-IA64_PT_REGS_SIZE,sp // A allocate space for pt_regs structure
+ mov ar.rnat=r24 // M2 restore kernel's AR.RNAT
+ ;;
+ mov ar.bspstore=r23 // M2 restore kernel's AR.BSPSTORE
+ br.cond.sptk .back_from_break_fixup
+END(break_fault)
+
+ .org ia64_ivt+0x3000
+/////////////////////////////////////////////////////////////////////////////////////////
+// 0x3000 Entry 12 (size 64 bundles) External Interrupt (4)
+ENTRY(interrupt)
+ DBG_FAULT(12)
+ mov r31=pr // prepare to save predicates
+ ;;
+ SAVE_MIN_WITH_COVER // uses r31; defines r2 and r3
+#ifdef CONFIG_XEN
+ movl r3=XSI_PSR_IC
+ mov r14=1
+ ;;
+ st4 [r3]=r14
+#else
+ ssm psr.ic | PSR_DEFAULT_BITS
+#endif
+ ;;
+ adds r3=8,r2 // set up second base pointer for SAVE_REST
+ srlz.i // ensure everybody knows psr.ic is back on
+ ;;
+ SAVE_REST
+ ;;
+ MCA_RECOVER_RANGE(interrupt)
+ alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
+#ifdef CONFIG_XEN
+ ;;
+ XEN_HYPER_GET_IVR
+ ;;
+ mov out0=r8 // pass cr.ivr as first arg
+#else
+ mov out0=cr.ivr // pass cr.ivr as first arg
+#endif
+ add out1=16,sp // pass point...
[truncated message content] |
