This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "krobot".
The branch, master has been updated
via d2263c4a65ff26f062be07d440f81591045645fb (commit)
from b5dd28ad72923a038b155c247d8457f2c9eb0e4a (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit d2263c4a65ff26f062be07d440f81591045645fb
Author: Germain Haessig <gha...@cr...>
Date: Sat Apr 6 22:58:55 2013 +0200
[Beacon_Laser] initial import of dump_times firmware
New laser Beacon system. Firmware to dump the data through Xbee for later use.
-----------------------------------------------------------------------
Changes:
diff --git a/elec/boards/Beacon_Laser/Firmwares/dump_times/dump_times.ino b/elec/boards/Beacon_Laser/Firmwares/dump_times/dump_times.ino
new file mode 100644
index 0000000..a1a6b11
--- /dev/null
+++ b/elec/boards/Beacon_Laser/Firmwares/dump_times/dump_times.ino
@@ -0,0 +1,116 @@
+ /*
+ * beacon_1_dump.c
+ * --------------------
+ * Copyright : (c) 2013, Germain Haessig <ger...@cr...>
+ * Licence : BSD3
+ *
+ * This file is a part of [kro]bot.
+ */
+
+
+int pin_interrupt = 2 ;
+int pin_A = 3 ;
+int pin_B = 4 ;
+int pin_C = 5 ;
+
+volatile unsigned long times[12]={0,0,0,0,0,0,0,0,0,0,0,0};
+volatile int index_times=0;
+
+int i;
+
+volatile boolean flag_data_ready,cmd_get_data;
+float N ;
+float l = 2 ;
+float L = 3 ;
+float k = 0.5*l ;
+float r = 28E-3 ;
+
+float gamma_A,gamma_B,gamma_C;
+float d_A,d_B,d_C;
+
+float alpha, beta,gamma;
+
+float x_angle,y_angle;
+
+
+void setup() {
+ delay(2000);
+ flag_data_ready = false ;
+ cmd_get_data = true;
+ Serial.begin(115200);
+ attachInterrupt(0,interrupt1,RISING);
+}
+
+
+
+void loop() {
+ static float A = 0 ;
+ static float B = 0 ;
+ static float denom = 0 ;
+
+ if(flag_data_ready) {
+ flag_data_ready = false ;
+ N=(1E6/(times[6]-times[0])*60); // beacon RPM
+
+ /*gamma_A = N*(times[1]-times[0])*M_PI/30;
+ gamma_B = N*(times[3]-times[2])*M_PI/30;
+ gamma_C = N*(times[5]-times[1])*M_PI/30;
+
+ d_A = r/(sin(gamma_A/2));
+ d_B = r/(sin(gamma_B/2));
+ d_C = r/(sin(gamma_C/2));*/
+ /*
+ alpha=N*(times[2]-times[0])*1E-6*M_PI/30;
+ beta=N*(times[4]-times[2])*1E-6*M_PI/30;
+ gamma=N*(times[6]-times[4])*1E-6*M_PI/30;
+
+ A = tan(alpha);
+ B = tan(beta) ;
+
+ denom = B*B*l*l+A*A*l*l*B*B+A*A*B*B*k*k+A*A*L*L+A*A*k*k+B*B*A*A*L*L-2*A*A*l*B*B*k-2*A*A*l*B*L+2*B*l*A*k-2*B*B*l*A*L;
+ x_angle = (l*B-B*k-L)*(A*B*L-A*k-B*k-L)*A*l/denom;
+ y_angle = l*(-A*k+A*B*L-B*k-L)*(-l*B-A*k+A*B*L)/denom;
+ */
+
+ for(i=1;i<=11;i++) {
+ Serial.print(times[i]-times[0]);
+ Serial.print(" ");
+ }
+ Serial.println();
+
+ cmd_get_data = true ;
+ }
+
+}
+
+
+void interrupt1() {
+ static int last_beacon = -1 ;
+ static boolean measuring = false ;
+ unsigned long time = micros();
+ int beacon = -1 ;
+
+ if(digitalRead(pin_A)) {
+ beacon = 0 ;
+ } else if(digitalRead(pin_B)) {
+ beacon = 1 ;
+ } else if(digitalRead(pin_C)) {
+ beacon = 2 ;
+ }
+
+ if (!measuring && cmd_get_data && last_beacon == 2 && beacon == 0) {
+ measuring = true ;
+ cmd_get_data = false ;
+ index_times = 0;
+ }
+ if(measuring) {
+ times[index_times] = time;
+ index_times++;
+ if(index_times > 11) {
+ measuring = false ;
+ flag_data_ready = true ;
+ }
+ }
+ last_beacon=beacon ;
+}
+
hooks/post-receive
--
krobot
|
