Hi all,

I installed KFS and it seems to work across two nodes, but I can't get Fuse to work.

From either node I can do a KfsPing and get the following results:
[root@storage-0-01 kfs_JMM]# ./build/bin/tools/KfsPing -m -s storage-0-02 -p 20000
s=storage-0-01, p=30000, total=10000(GB), used=0(GB), util=0%
s=storage-0-02, p=30000, total=10000(GB), used=0(GB), util=0%


When I try mounting with FUSE using debugging the following happens:
[root@storage-0-02 bin]# ./kfs_fuse -d /kfs/
unique: 1, opcode: INIT (26), nodeid: 0, insize: 56
INIT: 7.8
flags=0x00000003
max_readahead=0x00020000
Properties::loadProperties() Could not open the file:./kfs.prp
   INIT: 7.8
   flags=0x00000000
   max_readahead=0x00020000
   max_write=0x00020000
   unique: 1, error: 0 (Success), outsize: 40
unique: 2, opcode: STATFS (17), nodeid: 1, insize: 40
   unique: 2, error: 0 (Success), outsize: 96


I can then see it mounted when i do a 'mount' command:
fuse on /kfs type fuse (rw,nosuid,nodev)


if I try to do an ls, cp, etc however I get an error:
[root@storage-0-02 ~]# cp -av /root/dist/kfs-0.1.2.tar.gz /kfs
cp: accessing `/kfs': Transport endpoint is not connected
[root@storage-0-02 ~]# ls /kfs
ls: /kfs: Transport endpoint is not connected
[root@storage-0-02 ~]#


Does anyone know what is happening here and how I can solve this problem?

Thanks so much,
Jordan