From: Vincent P. <vin...@la...> - 2014-05-09 12:48:55
|
Hi Kdenlive devs & fans, It's been a long time we have not released any piece of code, while much work has been done on various points. Our users either are either stuck with old 0.9.6 version (many little bugs fixed since then) or take the risk to track development head. As the laptop I carry everywhere has a too poor GPU to run movit (and I'm not the only one), I tagged the latest commit before Sesse's work merge as 0.9.6.1, and picked the later changes not involving GLSL in a separate branch ("next" was available, maybe it was not a very good choice :-/). I prepared a release version (CMake option) and tagged 0.9.6.2. Before preparing a tarball, getting PPA builds and blogging about it, maybe you would like to test a bit more this version (I don't edit movies intensively these times) or have precises fixs in mind? Up to you to react in the next few days ;-) That being said, I think it shouldn't be hard to disable movit if it fails to start. Once done, maybe we could think of releasing "master" as 0.9.8(.0), a useful milestone (to track bugs) ! Or do you consider it is too far from stable ? We shouldn't disappoint the release-channel users... Happy hacking, Vincent |
From: Dan D. <da...@de...> - 2014-05-09 16:41:40
|
On Fri, May 9, 2014 at 5:48 AM, Vincent PINON <vin...@la...>wrote: > Hi Kdenlive devs & fans, > > It's been a long time we have not released any piece of code, while much > work has been done on various points. > Our users either are either stuck with old 0.9.6 version (many little > bugs fixed since then) or take the risk to track development head. > > As the laptop I carry everywhere has a too poor GPU to run movit (and > I'm not the only one), I tagged the latest commit before Sesse's work > merge as 0.9.6.1, > and picked the later changes not involving GLSL in a separate branch > ("next" was available, maybe it was not a very good choice :-/). > I prepared a release version (CMake option) and tagged 0.9.6.2. > Before preparing a tarball, getting PPA builds and blogging about it, > maybe you would like to test a bit more this version (I don't edit > movies intensively these times) or have precises fixs in mind? > Up to you to react in the next few days ;-) > > I recommend that you do not add another field to your release numbering scheme. It is fine for git tagging, but please consider releasing the next version regardless of its contents as 0.9.8. Consider not so much the meaning of the version number but how it might be used by software collections for tracking upgrades. etc. Also, do you think users really want to have to remember to specify 0.9.6.2 instead of 0.9.6? They might even think that additional .2 does not represent a code change but perhaps some packaging- or build-related change. > That being said, I think it shouldn't be hard to disable movit if it > fails to start. Once done, maybe we could think of releasing "master" as > 0.9.8(.0), a useful milestone (to track bugs) ! Or do you consider it is > too far from stable ? We shouldn't disappoint the release-channel users... > > Based on my brief testing while updating and supporting the build-kdenlive.sh script, it is not stable enough. +-DRD-+ |
From: Vincent P. <vin...@la...> - 2014-05-14 19:10:57
|
That happened this afternoon: v0.9.8 is out! http://kdenlive.org/node/9179 => relayed on planetkde.org, then quickly commented on phoronix... time to update "release" packages, test, and comment... and time for me to make a mess in master ;-) Le vendredi 9 mai 2014, 09:41:33 Dan Dennedy a écrit : > On Fri, May 9, 2014 at 5:48 AM, Vincent PINON <vin...@la...>wrote: > > Hi Kdenlive devs & fans, > > > > It's been a long time we have not released any piece of code, while much > > work has been done on various points. > > Our users either are either stuck with old 0.9.6 version (many little > > bugs fixed since then) or take the risk to track development head. > > > > As the laptop I carry everywhere has a too poor GPU to run movit (and > > I'm not the only one), I tagged the latest commit before Sesse's work > > merge as 0.9.6.1, > > and picked the later changes not involving GLSL in a separate branch > > ("next" was available, maybe it was not a very good choice :-/). > > I prepared a release version (CMake option) and tagged 0.9.6.2. > > Before preparing a tarball, getting PPA builds and blogging about it, > > maybe you would like to test a bit more this version (I don't edit > > movies intensively these times) or have precises fixs in mind? > > Up to you to react in the next few days ;-) > > I recommend that you do not add another field to your release numbering > scheme. It is fine for git tagging, but please consider releasing the next > version regardless of its contents as 0.9.8. Consider not so much the > meaning of the version number but how it might be used by software > collections for tracking upgrades. etc. Also, do you think users really > want to have to remember to specify 0.9.6.2 instead of 0.9.6? They might > even think that additional .2 does not represent a code change but perhaps > some packaging- or build-related change. > > > That being said, I think it shouldn't be hard to disable movit if it > > fails to start. Once done, maybe we could think of releasing "master" as > > 0.9.8(.0), a useful milestone (to track bugs) ! Or do you consider it is > > too far from stable ? We shouldn't disappoint the release-channel users... > > Based on my brief testing while updating and supporting the > build-kdenlive.sh script, it is not stable enough. > > +-DRD-+ |
From: Salvatore B. <ope...@gm...> - 2014-05-14 19:17:42
|
Very nice thank you! Let's spread the word out there on social networks etc so people know the Kdenlive is not dead! 2014-05-14 21:10 GMT+02:00 Vincent Pinon <vin...@la...>: > That happened this afternoon: v0.9.8 is out! > http://kdenlive.org/node/9179 > => relayed on planetkde.org, then quickly commented on phoronix... > > time to update "release" packages, test, and comment... > and time for me to make a mess in master ;-) > > Le vendredi 9 mai 2014, 09:41:33 Dan Dennedy a écrit : > > On Fri, May 9, 2014 at 5:48 AM, Vincent PINON > <vin...@la...>wrote: > > > Hi Kdenlive devs & fans, > > > > > > It's been a long time we have not released any piece of code, while > much > > > work has been done on various points. > > > Our users either are either stuck with old 0.9.6 version (many little > > > bugs fixed since then) or take the risk to track development head. > > > > > > As the laptop I carry everywhere has a too poor GPU to run movit (and > > > I'm not the only one), I tagged the latest commit before Sesse's work > > > merge as 0.9.6.1, > > > and picked the later changes not involving GLSL in a separate branch > > > ("next" was available, maybe it was not a very good choice :-/). > > > I prepared a release version (CMake option) and tagged 0.9.6.2. > > > Before preparing a tarball, getting PPA builds and blogging about it, > > > maybe you would like to test a bit more this version (I don't edit > > > movies intensively these times) or have precises fixs in mind? > > > Up to you to react in the next few days ;-) > > > > I recommend that you do not add another field to your release numbering > > scheme. It is fine for git tagging, but please consider releasing the > next > > version regardless of its contents as 0.9.8. Consider not so much the > > meaning of the version number but how it might be used by software > > collections for tracking upgrades. etc. Also, do you think users really > > want to have to remember to specify 0.9.6.2 instead of 0.9.6? They might > > even think that additional .2 does not represent a code change but > perhaps > > some packaging- or build-related change. > > > > > That being said, I think it shouldn't be hard to disable movit if it > > > fails to start. Once done, maybe we could think of releasing "master" > as > > > 0.9.8(.0), a useful milestone (to track bugs) ! Or do you consider it > is > > > too far from stable ? We shouldn't disappoint the release-channel > users... > > > > Based on my brief testing while updating and supporting the > > build-kdenlive.sh script, it is not stable enough. > > > > +-DRD-+ > > > > ------------------------------------------------------------------------------ > "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE > Instantly run your Selenium tests across 300+ browser/OS combos. > Get unparalleled scalability from the best Selenium testing platform > available > Simple to use. Nothing to install. Get started now for free." > http://p.sf.net/sfu/SauceLabs > _______________________________________________ > Kdenlive-devel mailing list > Kde...@li... > https://lists.sourceforge.net/lists/listinfo/kdenlive-devel > -- -- Tore Brigaglia |
From: Anna M. <gin...@in...> - 2014-05-14 20:28:17
|
On 14/05/14 20:17, Salvatore Brigaglia wrote: > Very nice thank you! Let's spread the word out there on social > networks etc so people know the Kdenlive is not dead! > yes! Anyone know who the @kdenlive twitter belongs too? last tweet 2011 :/ |
From: Anna M. <gin...@in...> - 2014-05-14 20:36:39
|
On 14/05/14 21:28, Anna Morris wrote: > On 14/05/14 20:17, Salvatore Brigaglia wrote: >> Very nice thank you! Let's spread the word out there on social >> networks etc so people know the Kdenlive is not dead! >> > yes! tweeted from personal and work accounts btw! Great news guys, thanks for the work! :D A x |
From: laurent M. <mo...@kd...> - 2014-05-14 20:12:43
|
Great news ! Thanks On mercredi 14 mai 2014 21:10:40 Vincent Pinon wrote: > That happened this afternoon: v0.9.8 is out! > http://kdenlive.org/node/9179 > => relayed on planetkde.org, then quickly commented on phoronix... > > time to update "release" packages, test, and comment... > and time for me to make a mess in master ;-) > |
From: Vincent P. <vin...@la...> - 2014-05-15 13:13:15
|
So excited to publish this release, of course I went too fast... my changes in fades and profiles where wrong (audio fade shortcut doesn't work on split AV, and profiles are all categorized in "file" category). I committed the small patch in "next" (too few to make a new release). There's also the problem of including the translation files in the package (I wrongly believed it was now part of KDE release)... Before delivering a new archive (new release, is there any other choice?) maybe the best is to wait for more feedback (bug reports) and let translators complete their work. Please give me your opinion, I'm feeling sorry about the situation... Regards, Vincent. |
From: Anna M. <gin...@in...> - 2014-05-15 13:39:16
|
On 15/05/14 14:13, Vincent Pinon wrote: > Please give me your opinion, I'm feeling sorry about the situation... I just wanted to say well done none the less. Release management is a really hard skill and many much bigger and richer projects have just as many problems as this, so don't feel so bad. Keep up the good work you wonderful people! You have no idea how much I am thankful that this project is still kicking :D a x |
From: Michael S. <mi...@os...> - 2014-05-14 19:24:04
|
On Wed, May 14, 2014 at 09:10:40PM +0200, Vincent Pinon wrote: > That happened this afternoon: v0.9.8 is out! Yay, congratulations guys! > http://kdenlive.org/node/9179 -- ---- WBR, Michael Shigorin / http://altlinux.org ------ http://opennet.ru / http://anna-news.info |
From: Javier A. F. A. <el...@gm...> - 2014-05-14 19:37:37
|
please update home page.... it still says 0.9.6 :) On Wed, May 14, 2014 at 9:23 PM, Michael Shigorin <mi...@os...> wrote: > On Wed, May 14, 2014 at 09:10:40PM +0200, Vincent Pinon wrote: > > That happened this afternoon: v0.9.8 is out! > > Yay, congratulations guys! > > > http://kdenlive.org/node/9179 > > -- > ---- WBR, Michael Shigorin / http://altlinux.org > ------ http://opennet.ru / http://anna-news.info > > > ------------------------------------------------------------------------------ > "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE > Instantly run your Selenium tests across 300+ browser/OS combos. > Get unparalleled scalability from the best Selenium testing platform > available > Simple to use. Nothing to install. Get started now for free." > http://p.sf.net/sfu/SauceLabs > _______________________________________________ > Kdenlive-devel mailing list > Kde...@li... > https://lists.sourceforge.net/lists/listinfo/kdenlive-devel > |
From: Vincent P. <vin...@la...> - 2014-05-14 20:19:38
|
Le mercredi 14 mai 2014, 21:37:30 Javier Agustìn Fernàndez Arroyo a écrit : > please update home page.... it still says 0.9.6 :) oops, thanks, updated! |