Re: [Jtdx-improved-community] v3.0.0 of WSJT-X Improved brings a new multithreaded FT8 decoder

[Uwe, D. <dg...@gm...>]

Marco,

dann ist vielleicht noch folgende Information für dich interessant: 
Alles Wichtige in Bezug zu WSJT-X Improved wird immer über meine 
wsjt-x-improved-community Email Liste 
<https://sourceforge.net/projects/wsjt-x-improved/lists/wsjt-x-improved-community> 
veröffentlicht. Am besten abonnierst 
<https://sourceforge.net/projects/wsjt-x-improved/lists/wsjt-x-improved-community> 
du die. Und daneben haben wir noch das WSJTX GROUP Forum 
<https://groups.io/g/wsjtgroup>.

Then you might find the following information interesting: All important 
information relating to WSJT-X Improved is always published on my 
wsjt-x-improved-community email list 
<https://sourceforge.net/projects/wsjt-x-improved/lists/wsjt-x-improved-community>. 
It's best to subscribe to it 
<https://sourceforge.net/projects/wsjt-x-improved/lists/wsjt-x-improved-community>. 
We also have the WSJTX GROUP forum <https://groups.io/g/wsjtgroup>.

73 de DG2YCB,
Uwe
________________________________________
German Amateur Radio Station DG2YCB
Dr. Uwe Risse
eMail: dg...@gm...
Info: www.qrz.com/db/DG2YCB


Am 17.09.2025 um 10:36 schrieb Marco Paglionico IN3UFW:
> Super UWE, sehr übersichtlich, und ich freue mich über die neue 
> Möglichkeit. Ich werde weiterhin alles im Auge behalten. Ich bin 
> wirklich zufrieden damit, denn es ist toll, es mit dem 
> Track-Tracking-System (leider weiß ich den Namen der App nicht mehr) 
> verbinden zu können, mit dem man die durchgeführten DXCCs aufzeichnen 
> und bei Bedarf per Low-EQSL bestätigen kann. Ich sitze gerade im Büro 
> und lese heimlich die Anleitung. Ich nutze die H/F-Funktion nur für 
> DX-Expeditionen auf dem 17/12-Band, das ich besonders liebe, und dem 
> 40-MHz-Band, das ich ständig überwache.
>
> Gut für die VHF- und EME-Zonen, in denen ich viel bis 24 GHz arbeite. 
> Ich würde wirklich gerne weiterhin alles im Auge behalten und bitte 
> euch um Informationen.
>
> 73 und viel Spaß beim Testen euch allen.
>
>
> Marco in3ufw jn55
>
> Il giorno mer 17 set 2025 alle ore 10:28 Uwe, DG2YCB <dg...@gm...> 
> ha scritto:
>
>     Ciao Marco,
>
>     Die Einstellung der Frequenzen funktioniert einwandfrei (zumindest
>     für die Tausende von Nutzern, hi). Ein normaler Links-Klick auf
>     die Bandtasten bringt die auf die Band/Mode Default Frequenz (also
>     diejenige, für die du bei Settings/Frequencies die Häkchen bei
>     "Pref" gesetzt hast); und ein Links-Klick auf die Bandteasten
>     führt dich zu den Haupt-DXp-Frequenzen (bzw. bei 6m zu der
>     interkontintalen Arbeitsfrequenz 50,323 MHz). Sollte das bei dir
>     nicht wie gewünscht funktionieren, dann gehe mal zu
>     Settings/Frequencies, mache eine Rechts-Klick auf die
>     Frequenztabelle und Klicke auf "Reset". Dann solltest du alle
>     Frequenzen korrekt vorfinden.
>
>     Du kannst im Prinzip jede FT8 Station auch im normalen FT8 Modus
>     arbeiten (auch wenn sie den MSHV Multistream Modus nutzen).
>     "Hound" ist nicht unbedingt erforderlich, ist aber natürlich
>     ratsam für F/H-Betrieb oder auch bei MSHV Multistream Stationen.
>     Lediglich wendu einen der Contest Modes verwendest, musst du
>     natürlich in den korrekten Contest Mode schalten. JTDX unterstützt
>     übrigens nicht alle Contest Nachrichten.
>
>     Bezüglich einer Anleitung: Wir haben die meisten Punkte inzwischen
>     in das v3.0 User Guide aufgenommen. Ansonsten kann ich dir diese
>     Übersicht empfehlen:
>     The_additional_features_of_wsjt-x_improved.pdf
>     <https://sourceforge.net/projects/wsjt-x-improved/files/The_additional_features_of_wsjt-x_improved.pdf/download>
>
>     English translation:
>
>     Hi Marco,
>
>     The frequency settings work perfectly (at least for the thousands
>     of users, hi). A normal left-click on the band buttons brings you
>     to the band/mode default frequency (i.e., the one for which you
>     have checked “Pref” under Settings/Frequencies); and a left-click
>     on the band buttons takes you to the main DXp frequencies (or, in
>     the case of 6m, to the intercontinental operating frequency 50.323
>     MHz). If this does not work as desired, go to
>     Settings/Frequencies, right-click on the frequency table and click
>     on “Reset.” Then you should find all frequencies correct.
>
>     Basically, you can work any FT8 station in normal FT8 mode (even
>     if they use MSHV multistream mode). “Hound” is not absolutely
>     necessary, but it is of course advisable for F/H operation or for
>     MSHV multistream stations. Only when using one of the contest
>     modes do you need to switch to the correct contest mode. JTDX does
>     not support all the various contest messages, by the way.
>
>     Regarding instructions: We have now included most of the points in
>     the v3.0 User Guide. Otherwise, I can recommend this overview:
>     The_additional_features_of_wsjt-x_improved.pdf
>     <https://sourceforge.net/projects/wsjt-x-improved/files/The_additional_features_of_wsjt-x_improved.pdf/download>
>
>
>     73 de DG2YCB,
>     Uwe
>     ________________________________________
>     German Amateur Radio Station DG2YCB
>     Dr. Uwe Risse
>     eMail: dg...@gm...
>     Info: www.qrz.com/db/DG2YCB <http://www.qrz.com/db/DG2YCB>
>
>
>     Am 17.09.2025 um 08:33 schrieb Marco Paglionico IN3UFW:
>>     Hallo und danke für das Update, das ich gerade teste. Ja, ich
>>     habe einen flüssigeren Signalempfang und die Decodierung von mehr
>>     Sendern festgestellt. Ich würde gerne JTDX nicht mehr verwenden,
>>     aber manchmal muss ich die „HUND“-Funktion einstellen, wenn eine
>>     DX-Station vorhanden ist, denn wenn ich bei jedem Anruf WSJT
>>     wähle, riskiere ich, sie zu verlieren. Ich sehe, du hast die
>>     Frequenzen so eingestellt: „Ich glaube, sie sind bereit für DX,
>>     oder irre ich mich?“ Gestern habe ich es auf 15 Metern versucht,
>>     musste aber jedes Mal manuell auf 21.074 gehen. Es gibt noch viel
>>     zu tun, aber wenn möglich, hätte ich gerne eine Bedienungsanleitung.
>>
>>     Die restliche Leistung wird immer besser.
>>
>>     Danke, 73 Marco in3ufw
>>
>>     Il giorno lun 15 set 2025 alle ore 16:09 Uwe, DG2YCB via
>>     Jtdx-improved-community
>>     <jtd...@li...> ha scritto:
>>
>>         Dear users of JTDX Improved,
>>
>>         I like to inform you that a new WSJT-X Improved 3.0.0
>>         250915-RC1 release is available for download. This might also
>>         be interesting for you, because the focus this time is on
>>         improving FT8 decoding performance. I launched an initiative
>>         on this a few months ago, and the results are quite
>>         impressive. Not only have we succeeded in further improving
>>         the decoding performance of the existing single-threaded
>>         decoder for weak signals, we have also programmed a *new FT8
>>         decoder that uses multithreaded technology (like JTDX)*.
>>         However, our multithreaded decoder (MTD) goes beyond the
>>         capabilities of JTDX (e.g. better handling of contest
>>         messages and AP technology, and slightly better sensitivity).
>>
>>         You may find my YouTube videos below informative. They are
>>         available in English and German:
>>
>>           * *v3.0.0 (in English)
>>             <https://www.youtube.com/watch?v=vKAgB0Tt6Ns>
>>             *
>>           * *v3.0.0 (in Deutsch/German)
>>             <https://www.youtube.com/watch?v=PHSpIGHtXdI>*
>>
>>         The MTD has its own set of parameters that are tunable for
>>         best overall performance in your setup. I programmed it in a
>>         way that most of the options are already familiar to JTDX users.
>>
>>         One of the highlights, however, are the options 2-Stage and
>>         3-Stage. This combines both decoders, resulting in the most
>>         powerful FT8 decoding engine the world has seen so far. Of
>>         course, this requires that your computer is fast enough to
>>         handle it.
>>
>>
>>
>>
>>         You will *find the downloadable files on my SourceForge page
>>         in the new WSJT-X_v3.0.0 directory
>>         <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/>*.
>>         Here are the direct links to download the most important
>>         packages:
>>
>>         *Windows:*
>>
>>           * *wsjtx-3.0.0-win64_improved_PLUS_250915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/wsjtx-3.0.0-win64_improved_PLUS_250915-RC1.exe/download>*.exe
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/wsjtx-3.0.0-win64_improved_PLUS_250915-RC1.exe/download>
>>             (Windows 64-bit, WSJT-X GUI)*
>>           * *wsjtx-3.0.0-**win64_improved_AL_PLUS_25**0**915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/wsjtx-3.0.0-win64_improved_AL_PLUS_250915-RC1.exe/download>*.exe
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/wsjtx-3.0.0-win64_improved_AL_PLUS_250915-RC1.exe/download>
>>             (Windows 64-bit, AL GUI)*
>>           * *wsjtx-3.0.0-**win64**_improved_widescreen_PLUS_25**0**915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/wsjtx-3.0.0-win64_improved_widescreen_PLUS_250915-RC1.exe/download>*.exe
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/wsjtx-3.0.0-win64_improved_widescreen_PLUS_250915-RC1.exe/download>
>>             (Windows 64-bit, widescreen GUI)*
>>
>>         *Linux:*
>>
>>           * *wsjtx_3.0.0_improved_PLUS_**25**0**915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/Linux/wsjtx_3.0.0_improved_PLUS_250915-RC1_amd64.deb/download>*_amd64.deb
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/Linux/wsjtx_3.0.0_improved_PLUS_250915-RC1_amd64.deb/download>
>>             (Linux**, WSJT-X GUI**)*
>>           * *wsjtx_**3.0.0**_improved_AL_PLUS_**25**0**915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/Linux/wsjtx_3.0.0_improved_AL_PLUS_250915-RC1_amd64.deb/download>*_amd64.deb
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/Linux/wsjtx_3.0.0_improved_AL_PLUS_250915-RC1_amd64.deb/download>
>>             (Linux**, AL GUI**)*
>>
>>         *macOS:*
>>
>>           * *wsjtx-**3.0.0**_improved_PLUS_**25**0**915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/macOS/wsjtx-3.0.0_improved_PLUS_250915-RC1_Darwin.dmg/download>*_Darwin.dmg
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/macOS/wsjtx-3.0.0_improved_PLUS_250915-RC1_Darwin.dmg/download>
>>             (macOS x86_64**, WSJT-X GUI**)*
>>           * *wsjtx-**3.0.0**_improved_AL_PLUS_**25**0**915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/macOS/wsjtx-3.0.0_improved_AL_PLUS_250915-RC1_Darwin.dmg/download>*_Darwin.dmg
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/macOS/wsjtx-3.0.0_improved_AL_PLUS_250915-RC1_Darwin.dmg/download>
>>             (macOS x86_64**, AL GUI**)*
>>           * *wsjtx-**3.0.0**_improved_PLUS_**25**0**915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/macOS/wsjtx-3.0.0_improved_PLUS_250915-RC1_M1.zip/download>*_M1.zip
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/macOS/wsjtx-3.0.0_improved_PLUS_250915-RC1_M1.zip/download>
>>             (macOS M1**, WSJT-X GUI**)*
>>           * *wsjtx-**3.0.0**_improved_AL_PLUS_**25**0**915-RC1*
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/macOS/wsjtx-3.0.0_improved_AL_PLUS_250915-RC1_M1.zip/download>*_M1.zip
>>             <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/macOS/wsjtx-3.0.0_improved_AL_PLUS_250915-RC1_M1.zip/download>
>>             (macOS M1**, AL GUI**)*
>>
>>         Please note that WSJT-X Improved has a much more modern
>>         source code than JTDX (improved), which is also constantly
>>         being developed further. With the addition of a new optional
>>         multithreaded FT8 decoder, switching to WSJT-X Improved
>>         should be worthwhile for even more of you.
>>
>>         Enjoy the *new WSJT-X Improved 3.0.0 release
>>         <https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v3.0.0/>*!
>>
>>         73 de DG2YCB,
>>         Uwe
>>         ________________________________________
>>         German Amateur Radio Station DG2YCB
>>         Dr. Uwe Risse
>>         eMail: dg...@gm...
>>         Info: www.qrz.com/db/DG2YCB <http://www.qrz.com/db/DG2YCB>
>>
>>
>>         _______________________________________________
>>         Jtdx-improved-community mailing list
>>         Jtd...@li...
>>         https://lists.sourceforge.net/lists/listinfo/jtdx-improved-community
>>
>>
>>
>>     -- 
>>     */ Marco Paglionico IN3UFW /*
>>     */email@: _paglionicom@gmail.com_/*
>>     /Prima di stampare pensa all'ambiente/
>>
>>     /
>>     /
>>
>
>
>
> -- 
> */ Marco Paglionico IN3UFW /*
> */email@: _paglionicom@gmail.com_/*
> /Prima di stampare pensa all'ambiente/
>
> /
> /
>