Menu
▾
▴
jsynthlib-devel
|
From: John M. <jo...@as...> - 2011-11-13 16:16:02
|
Guys Can anyone tell me the best place to find a "Getting Started" guide to developing JSynthLib. I have found a couple of bits and pieces on the net but I'm not sure the most appropriate place as some of them seem a bit old compared to others. I'm hoping to work in Eclipse (Helios) so any guidance to getting started with that would be useful. I've already managed to check out the trunk from SVN but any further advice would be appreciated. I'm looking to build support for the Kawai K1. I noticed it got a mention on a comment on this list a while back; something to do with XML, so if anyone can point me to the best person to speak to about going down that route it would be appreciated too. Thanks John |
|
From: Frankie F. <jsy...@te...> - 2011-11-13 18:45:52
|
Hiya, First you should look at the programmer's guide http://jsynthlib.org/programming.html or in fact the latest version from svn: http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/doc/programming.html Then there is also some good information here on a wiki that a guy called freqrush has made http://jsynthlib.wikispaces.com/ and this includes a little bit about setting eclipse up. TBH I just set up eclipse by getting a copy of the trunk from svn, then importing the ant file into eclipse. Though I think you can also import a project from svn directly into eclipse as well. Any questions, please ask. And if you find anything missing or unclear in the documentation feel free to improve it ;) frankie On 13/11/2011 15:55, John McCabe wrote: > Guys > > Can anyone tell me the best place to find a "Getting Started" guide to > developing JSynthLib. I have found a couple of bits and pieces on the > net but I'm not sure the most appropriate place as some of them seem a > bit old compared to others. I'm hoping to work in Eclipse (Helios) so > any guidance to getting started with that would be useful. I've already > managed to check out the trunk from SVN but any further advice would be > appreciated. > > I'm looking to build support for the Kawai K1. I noticed it got a > mention on a comment on this list a while back; something to do with > XML, so if anyone can point me to the best person to speak to about > going down that route it would be appreciated too. > > Thanks > John > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Jsynthlib-devel mailing list > Jsy...@li... > https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel |
|
From: John M. <jo...@as...> - 2011-11-15 14:53:42
|
Frankie Thanks for that. I've just done a checkout from SourceForge SVN in to Eclipse and managed to get it to build. The only thing that seems odd is that the project name (allowing Eclipse to name it) is JSynthLib-CVS. It says version 1174 and "https://jsymthlib.svn.sourceforge.net/svnroot/jsynthlib/trunk/JSynthLib: JSynthLib" next to it. Does that look right? Thanks John On 13/11/2011 18:45, Frankie Fisher wrote: > Hiya, > > First you should look at the programmer's guide > http://jsynthlib.org/programming.html or in fact the latest version from > svn: > http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/doc/programming.html > > Then there is also some good information here on a wiki that a guy > called freqrush has made http://jsynthlib.wikispaces.com/ and this > includes a little bit about setting eclipse up. > > TBH I just set up eclipse by getting a copy of the trunk from svn, then > importing the ant file into eclipse. Though I think you can also import > a project from svn directly into eclipse as well. > > Any questions, please ask. And if you find anything missing or unclear > in the documentation feel free to improve it ;) > > frankie > > > On 13/11/2011 15:55, John McCabe wrote: >> Guys >> >> Can anyone tell me the best place to find a "Getting Started" guide to >> developing JSynthLib. I have found a couple of bits and pieces on the >> net but I'm not sure the most appropriate place as some of them seem a >> bit old compared to others. I'm hoping to work in Eclipse (Helios) so >> any guidance to getting started with that would be useful. I've already >> managed to check out the trunk from SVN but any further advice would be >> appreciated. >> >> I'm looking to build support for the Kawai K1. I noticed it got a >> mention on a comment on this list a while back; something to do with >> XML, so if anyone can point me to the best person to speak to about >> going down that route it would be appreciated too. >> >> Thanks >> John >> >> ------------------------------------------------------------------------------ >> RSA(R) Conference 2012 >> Save $700 by Nov 18 >> Register now >> http://p.sf.net/sfu/rsa-sfdev2dev1 >> _______________________________________________ >> Jsynthlib-devel mailing list >> Jsy...@li... >> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Jsynthlib-devel mailing list > Jsy...@li... > https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > |
|
From: Michael H. <pat...@ya...> - 2011-11-15 14:56:07
|
Yes, I get the same effect with the project named "JsynthLib-CVS" Mike ________________________________ From: John McCabe <jo...@as...> To: jsy...@li... Sent: Tuesday, November 15, 2011 9:53 AM Subject: Re: [Jsynthlib-devel] Getting started... Frankie Thanks for that. I've just done a checkout from SourceForge SVN in to Eclipse and managed to get it to build. The only thing that seems odd is that the project name (allowing Eclipse to name it) is JSynthLib-CVS. It says version 1174 and "https://jsymthlib.svn.sourceforge.net/svnroot/jsynthlib/trunk/JSynthLib: JSynthLib" next to it. Does that look right? Thanks John On 13/11/2011 18:45, Frankie Fisher wrote: > Hiya, > > First you should look at the programmer's guide > http://jsynthlib.org/programming.html or in fact the latest version from > svn: > http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/doc/programming.html > > Then there is also some good information here on a wiki that a guy > called freqrush has made http://jsynthlib.wikispaces.com/ and this > includes a little bit about setting eclipse up. > > TBH I just set up eclipse by getting a copy of the trunk from svn, then > importing the ant file into eclipse. Though I think you can also import > a project from svn directly into eclipse as well. > > Any questions, please ask. And if you find anything missing or unclear > in the documentation feel free to improve it ;) > > frankie > > > On 13/11/2011 15:55, John McCabe wrote: >> Guys >> >> Can anyone tell me the best place to find a "Getting Started" guide to >> developing JSynthLib. I have found a couple of bits and pieces on the >> net but I'm not sure the most appropriate place as some of them seem a >> bit old compared to others. I'm hoping to work in Eclipse (Helios) so >> any guidance to getting started with that would be useful. I've already >> managed to check out the trunk from SVN but any further advice would be >> appreciated. >> >> I'm looking to build support for the Kawai K1. I noticed it got a >> mention on a comment on this list a while back; something to do with >> XML, so if anyone can point me to the best person to speak to about >> going down that route it would be appreciated too. >> >> Thanks >> John >> >> ------------------------------------------------------------------------------ >> RSA(R) Conference 2012 >> Save $700 by Nov 18 >> Register now >> http://p.sf.net/sfu/rsa-sfdev2dev1 >> _______________________________________________ >> Jsynthlib-devel mailing list >> Jsy...@li... >> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Jsynthlib-devel mailing list > Jsy...@li... > https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Jsynthlib-devel mailing list Jsy...@li... https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel |
|
From: frankster <jsy...@te...> - 2011-11-15 15:03:16
|
I don't get that - and it is rather odd because JSL is on SVN not CVS! Could there be an out of date eclipse project file stored in the repository or something? frankie On 11/15/11 14:55, Michael Hawkins wrote: > Yes, I get the same effect with the project named "JsynthLib-CVS" > > Mike > > > > ________________________________ > From: John McCabe<jo...@as...> > To: jsy...@li... > Sent: Tuesday, November 15, 2011 9:53 AM > Subject: Re: [Jsynthlib-devel] Getting started... > > Frankie > > Thanks for that. > > I've just done a checkout from SourceForge SVN in to Eclipse and managed > to get it to build. The only thing that seems odd is that the project > name (allowing Eclipse to name it) is JSynthLib-CVS. It says version > 1174 and > "https://jsymthlib.svn.sourceforge.net/svnroot/jsynthlib/trunk/JSynthLib: JSynthLib" > next to it. Does that look right? > > Thanks > John > > On 13/11/2011 18:45, Frankie Fisher wrote: >> Hiya, >> >> First you should look at the programmer's guide >> http://jsynthlib.org/programming.html or in fact the latest version from >> svn: >> http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/doc/programming.html >> >> Then there is also some good information here on a wiki that a guy >> called freqrush has made http://jsynthlib.wikispaces.com/ and this >> includes a little bit about setting eclipse up. >> >> TBH I just set up eclipse by getting a copy of the trunk from svn, then >> importing the ant file into eclipse. Though I think you can also import >> a project from svn directly into eclipse as well. >> >> Any questions, please ask. And if you find anything missing or unclear >> in the documentation feel free to improve it ;) >> >> frankie >> >> >> On 13/11/2011 15:55, John McCabe wrote: >>> Guys >>> >>> Can anyone tell me the best place to find a "Getting Started" guide to >>> developing JSynthLib. I have found a couple of bits and pieces on the >>> net but I'm not sure the most appropriate place as some of them seem a >>> bit old compared to others. I'm hoping to work in Eclipse (Helios) so >>> any guidance to getting started with that would be useful. I've already >>> managed to check out the trunk from SVN but any further advice would be >>> appreciated. >>> >>> I'm looking to build support for the Kawai K1. I noticed it got a >>> mention on a comment on this list a while back; something to do with >>> XML, so if anyone can point me to the best person to speak to about >>> going down that route it would be appreciated too. >>> >>> Thanks >>> John >>> >>> ------------------------------------------------------------------------------ >>> RSA(R) Conference 2012 >>> Save $700 by Nov 18 >>> Register now >>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>> _______________________________________________ >>> Jsynthlib-devel mailing list >>> Jsy...@li... >>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >> ------------------------------------------------------------------------------ >> RSA(R) Conference 2012 >> Save $700 by Nov 18 >> Register now >> http://p.sf.net/sfu/rsa-sfdev2dev1 >> _______________________________________________ >> Jsynthlib-devel mailing list >> Jsy...@li... >> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >> > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Jsynthlib-devel mailing list > Jsy...@li... > https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Jsynthlib-devel mailing list > Jsy...@li... > https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel |
|
From: John M. <jo...@as...> - 2011-11-15 15:58:43
|
On 15/11/2011 15:03, frankster wrote: > I don't get that - and it is rather odd because JSL is on SVN not CVS! > > Could there be an out of date eclipse project file stored in the > repository or something? That could be it. I've just done a browse on SourceForge and found this: http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/.project?revision=1099&view=markup which contains the content: <?xml version="1.0" encoding="UTF-8"?> <projectDescription> <name>JSynthLib-CVS</name> <comment></comment> I'm fairly happen then that I've got the latest stuff. Thanks again. John > > frankie > > > On 11/15/11 14:55, Michael Hawkins wrote: >> Yes, I get the same effect with the project named "JsynthLib-CVS" >> >> Mike >> >> >> >> ________________________________ >> From: John McCabe<jo...@as...> >> To: jsy...@li... >> Sent: Tuesday, November 15, 2011 9:53 AM >> Subject: Re: [Jsynthlib-devel] Getting started... >> >> Frankie >> >> Thanks for that. >> >> I've just done a checkout from SourceForge SVN in to Eclipse and managed >> to get it to build. The only thing that seems odd is that the project >> name (allowing Eclipse to name it) is JSynthLib-CVS. It says version >> 1174 and >> "https://jsymthlib.svn.sourceforge.net/svnroot/jsynthlib/trunk/JSynthLib: JSynthLib" >> next to it. Does that look right? >> >> Thanks >> John >> >> On 13/11/2011 18:45, Frankie Fisher wrote: >>> Hiya, >>> >>> First you should look at the programmer's guide >>> http://jsynthlib.org/programming.html or in fact the latest version from >>> svn: >>> http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/doc/programming.html >>> >>> Then there is also some good information here on a wiki that a guy >>> called freqrush has made http://jsynthlib.wikispaces.com/ and this >>> includes a little bit about setting eclipse up. >>> >>> TBH I just set up eclipse by getting a copy of the trunk from svn, then >>> importing the ant file into eclipse. Though I think you can also import >>> a project from svn directly into eclipse as well. >>> >>> Any questions, please ask. And if you find anything missing or unclear >>> in the documentation feel free to improve it ;) >>> >>> frankie >>> >>> >>> On 13/11/2011 15:55, John McCabe wrote: >>>> Guys >>>> >>>> Can anyone tell me the best place to find a "Getting Started" guide to >>>> developing JSynthLib. I have found a couple of bits and pieces on the >>>> net but I'm not sure the most appropriate place as some of them seem a >>>> bit old compared to others. I'm hoping to work in Eclipse (Helios) so >>>> any guidance to getting started with that would be useful. I've already >>>> managed to check out the trunk from SVN but any further advice would be >>>> appreciated. >>>> >>>> I'm looking to build support for the Kawai K1. I noticed it got a >>>> mention on a comment on this list a while back; something to do with >>>> XML, so if anyone can point me to the best person to speak to about >>>> going down that route it would be appreciated too. >>>> >>>> Thanks >>>> John >>>> >>>> ------------------------------------------------------------------------------ >>>> RSA(R) Conference 2012 >>>> Save $700 by Nov 18 >>>> Register now >>>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>>> _______________________________________________ >>>> Jsynthlib-devel mailing list >>>> Jsy...@li... >>>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>> ------------------------------------------------------------------------------ >>> RSA(R) Conference 2012 >>> Save $700 by Nov 18 >>> Register now >>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>> _______________________________________________ >>> Jsynthlib-devel mailing list >>> Jsy...@li... >>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>> >> ------------------------------------------------------------------------------ >> RSA(R) Conference 2012 >> Save $700 by Nov 18 >> Register now >> http://p.sf.net/sfu/rsa-sfdev2dev1 >> _______________________________________________ >> Jsynthlib-devel mailing list >> Jsy...@li... >> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >> ------------------------------------------------------------------------------ >> RSA(R) Conference 2012 >> Save $700 by Nov 18 >> Register now >> http://p.sf.net/sfu/rsa-sfdev2dev1 >> _______________________________________________ >> Jsynthlib-devel mailing list >> Jsy...@li... >> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Jsynthlib-devel mailing list > Jsy...@li... > https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > |
|
From: Frankie F. <jsy...@te...> - 2011-11-15 19:55:39
|
We should probably remove that file from svn On 15/11/2011 15:58, John McCabe wrote: > On 15/11/2011 15:03, frankster wrote: >> I don't get that - and it is rather odd because JSL is on SVN not CVS! >> >> Could there be an out of date eclipse project file stored in the >> repository or something? > That could be it. I've just done a browse on SourceForge and found this: > > http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/.project?revision=1099&view=markup > > which contains the content: > > <?xml version="1.0" encoding="UTF-8"?> > <projectDescription> > <name>JSynthLib-CVS</name> > <comment></comment> > > I'm fairly happen then that I've got the latest stuff. > > Thanks again. > > John > >> frankie >> >> >> On 11/15/11 14:55, Michael Hawkins wrote: >>> Yes, I get the same effect with the project named "JsynthLib-CVS" >>> >>> Mike >>> >>> >>> >>> ________________________________ >>> From: John McCabe<jo...@as...> >>> To: jsy...@li... >>> Sent: Tuesday, November 15, 2011 9:53 AM >>> Subject: Re: [Jsynthlib-devel] Getting started... >>> >>> Frankie >>> >>> Thanks for that. >>> >>> I've just done a checkout from SourceForge SVN in to Eclipse and managed >>> to get it to build. The only thing that seems odd is that the project >>> name (allowing Eclipse to name it) is JSynthLib-CVS. It says version >>> 1174 and >>> "https://jsymthlib.svn.sourceforge.net/svnroot/jsynthlib/trunk/JSynthLib: JSynthLib" >>> next to it. Does that look right? >>> >>> Thanks >>> John >>> >>> On 13/11/2011 18:45, Frankie Fisher wrote: >>>> Hiya, >>>> >>>> First you should look at the programmer's guide >>>> http://jsynthlib.org/programming.html or in fact the latest version from >>>> svn: >>>> http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/doc/programming.html >>>> >>>> Then there is also some good information here on a wiki that a guy >>>> called freqrush has made http://jsynthlib.wikispaces.com/ and this >>>> includes a little bit about setting eclipse up. >>>> >>>> TBH I just set up eclipse by getting a copy of the trunk from svn, then >>>> importing the ant file into eclipse. Though I think you can also import >>>> a project from svn directly into eclipse as well. >>>> >>>> Any questions, please ask. And if you find anything missing or unclear >>>> in the documentation feel free to improve it ;) >>>> >>>> frankie >>>> >>>> >>>> On 13/11/2011 15:55, John McCabe wrote: >>>>> Guys >>>>> >>>>> Can anyone tell me the best place to find a "Getting Started" guide to >>>>> developing JSynthLib. I have found a couple of bits and pieces on the >>>>> net but I'm not sure the most appropriate place as some of them seem a >>>>> bit old compared to others. I'm hoping to work in Eclipse (Helios) so >>>>> any guidance to getting started with that would be useful. I've already >>>>> managed to check out the trunk from SVN but any further advice would be >>>>> appreciated. >>>>> >>>>> I'm looking to build support for the Kawai K1. I noticed it got a >>>>> mention on a comment on this list a while back; something to do with >>>>> XML, so if anyone can point me to the best person to speak to about >>>>> going down that route it would be appreciated too. >>>>> >>>>> Thanks >>>>> John >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> RSA(R) Conference 2012 >>>>> Save $700 by Nov 18 >>>>> Register now >>>>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>>>> _______________________________________________ >>>>> Jsynthlib-devel mailing list >>>>> Jsy...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>>> ------------------------------------------------------------------------------ >>>> RSA(R) Conference 2012 >>>> Save $700 by Nov 18 >>>> Register now >>>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>>> _______________________________________________ >>>> Jsynthlib-devel mailing list >>>> Jsy...@li... >>>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>>> >>> ------------------------------------------------------------------------------ >>> RSA(R) Conference 2012 >>> Save $700 by Nov 18 >>> Register now >>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>> _______________________________________________ >>> Jsynthlib-devel mailing list >>> Jsy...@li... >>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>> ------------------------------------------------------------------------------ >>> RSA(R) Conference 2012 >>> Save $700 by Nov 18 >>> Register now >>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>> _______________________________________________ >>> Jsynthlib-devel mailing list >>> Jsy...@li... >>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >> ------------------------------------------------------------------------------ >> RSA(R) Conference 2012 >> Save $700 by Nov 18 >> Register now >> http://p.sf.net/sfu/rsa-sfdev2dev1 >> _______________________________________________ >> Jsynthlib-devel mailing list >> Jsy...@li... >> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >> > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Jsynthlib-devel mailing list > Jsy...@li... > https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel |
|
From: Joachim <li...@sd...> - 2011-11-16 19:16:16
|
I agree, can you do that? Joachim Am 15.11.2011 20:55, schrieb Frankie Fisher: > We should probably remove that file from svn > > On 15/11/2011 15:58, John McCabe wrote: >> On 15/11/2011 15:03, frankster wrote: >>> I don't get that - and it is rather odd because JSL is on SVN not CVS! >>> >>> Could there be an out of date eclipse project file stored in the >>> repository or something? >> That could be it. I've just done a browse on SourceForge and found this: >> >> http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/.project?revision=1099&view=markup >> >> which contains the content: >> >> <?xml version="1.0" encoding="UTF-8"?> >> <projectDescription> >> <name>JSynthLib-CVS</name> >> <comment></comment> >> >> I'm fairly happen then that I've got the latest stuff. >> >> Thanks again. >> >> John >> >>> frankie >>> >>> >>> On 11/15/11 14:55, Michael Hawkins wrote: >>>> Yes, I get the same effect with the project named "JsynthLib-CVS" >>>> >>>> Mike >>>> >>>> >>>> >>>> ________________________________ >>>> From: John McCabe<jo...@as...> >>>> To: jsy...@li... >>>> Sent: Tuesday, November 15, 2011 9:53 AM >>>> Subject: Re: [Jsynthlib-devel] Getting started... >>>> >>>> Frankie >>>> >>>> Thanks for that. >>>> >>>> I've just done a checkout from SourceForge SVN in to Eclipse and managed >>>> to get it to build. The only thing that seems odd is that the project >>>> name (allowing Eclipse to name it) is JSynthLib-CVS. It says version >>>> 1174 and >>>> "https://jsymthlib.svn.sourceforge.net/svnroot/jsynthlib/trunk/JSynthLib: JSynthLib" >>>> next to it. Does that look right? >>>> >>>> Thanks >>>> John >>>> >>>> On 13/11/2011 18:45, Frankie Fisher wrote: >>>>> Hiya, >>>>> >>>>> First you should look at the programmer's guide >>>>> http://jsynthlib.org/programming.html or in fact the latest version from >>>>> svn: >>>>> http://jsynthlib.svn.sourceforge.net/viewvc/jsynthlib/trunk/JSynthLib/doc/programming.html >>>>> >>>>> Then there is also some good information here on a wiki that a guy >>>>> called freqrush has made http://jsynthlib.wikispaces.com/ and this >>>>> includes a little bit about setting eclipse up. >>>>> >>>>> TBH I just set up eclipse by getting a copy of the trunk from svn, then >>>>> importing the ant file into eclipse. Though I think you can also import >>>>> a project from svn directly into eclipse as well. >>>>> >>>>> Any questions, please ask. And if you find anything missing or unclear >>>>> in the documentation feel free to improve it ;) >>>>> >>>>> frankie >>>>> >>>>> >>>>> On 13/11/2011 15:55, John McCabe wrote: >>>>>> Guys >>>>>> >>>>>> Can anyone tell me the best place to find a "Getting Started" guide to >>>>>> developing JSynthLib. I have found a couple of bits and pieces on the >>>>>> net but I'm not sure the most appropriate place as some of them seem a >>>>>> bit old compared to others. I'm hoping to work in Eclipse (Helios) so >>>>>> any guidance to getting started with that would be useful. I've already >>>>>> managed to check out the trunk from SVN but any further advice would be >>>>>> appreciated. >>>>>> >>>>>> I'm looking to build support for the Kawai K1. I noticed it got a >>>>>> mention on a comment on this list a while back; something to do with >>>>>> XML, so if anyone can point me to the best person to speak to about >>>>>> going down that route it would be appreciated too. >>>>>> >>>>>> Thanks >>>>>> John >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> RSA(R) Conference 2012 >>>>>> Save $700 by Nov 18 >>>>>> Register now >>>>>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>>>>> _______________________________________________ >>>>>> Jsynthlib-devel mailing list >>>>>> Jsy...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>>>> ------------------------------------------------------------------------------ >>>>> RSA(R) Conference 2012 >>>>> Save $700 by Nov 18 >>>>> Register now >>>>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>>>> _______________________________________________ >>>>> Jsynthlib-devel mailing list >>>>> Jsy...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>>>> >>>> ------------------------------------------------------------------------------ >>>> RSA(R) Conference 2012 >>>> Save $700 by Nov 18 >>>> Register now >>>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>>> _______________________________________________ >>>> Jsynthlib-devel mailing list >>>> Jsy...@li... >>>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>>> ------------------------------------------------------------------------------ >>>> RSA(R) Conference 2012 >>>> Save $700 by Nov 18 >>>> Register now >>>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>>> _______________________________________________ >>>> Jsynthlib-devel mailing list >>>> Jsy...@li... >>>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>> ------------------------------------------------------------------------------ >>> RSA(R) Conference 2012 >>> Save $700 by Nov 18 >>> Register now >>> http://p.sf.net/sfu/rsa-sfdev2dev1 >>> _______________________________________________ >>> Jsynthlib-devel mailing list >>> Jsy...@li... >>> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel >>> >> >> ------------------------------------------------------------------------------ >> RSA(R) Conference 2012 >> Save $700 by Nov 18 >> Register now >> http://p.sf.net/sfu/rsa-sfdev2dev1 >> _______________________________________________ >> Jsynthlib-devel mailing list >> Jsy...@li... >> https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Jsynthlib-devel mailing list > Jsy...@li... > https://lists.sourceforge.net/lists/listinfo/jsynthlib-devel > |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X