Hello,
I have a Philips 32pfl9604H and need the firmware to activate jointspace. But I can't find my model in the list and with the original firmware (just updated) the keycode for activation des not work. Any idea?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
From what i see on the Jointspace site, Jointspace should not be supported on your TV : http://jointspace.sourceforge.net/download.html
This list must be incomplete, as i know it's also supported in the 32pfl8404, which is also not in the list. My own 37pfl9604 supports it also.
It should work; i just updated a PFL7404 last week. Did you unpack the zip file to a USB? Otherwise your download may be corrupted. Try a new download and unpack.
Then follow the update procedure for USB exactly (it's in the download section also). The TV should be on; you then put in the USB stick and the update should start.
Sometimes it stalls in an early stage without even starting the program (black screen). Only then, you can then take out the USB stick, switch the TV off and on and start the procedure again.
Regards, Hugo
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I have a Philips 32pfl9604H and need the firmware to activate jointspace. But I can't find my model in the list and with the original firmware (just updated) the keycode for activation des not work. Any idea?
Hi,
From what i see on the Jointspace site, Jointspace should not be supported on your TV :
http://jointspace.sourceforge.net/download.html
This list must be incomplete, as i know it's also supported in the 32pfl8404, which is also not in the list. My own 37pfl9604 supports it also.
But….
In the release notes of the firmware 0.26.78.0 Jointspace can be used from version 0.26.76.0 onwards..
http://www.p4c.philips.com/cgi-bin/dcbint/cpcontent.pl?scy=NL&slg=AEN&mid=Link_Software&sct=9000_SERIES_FLAT_TV_SE&cat=TELEVISIONS_CA&grp=SOUND_AND_VISION_GR&session=20111209144737_82.171.255.130&ctn=32PFL9604H/12&dct=FUS&did=AEN&reldct=FHI&file=/files/3/32pfl9604h_12/32pfl9604h_12_fhi_eng.pdf#toolbar=0&zoom=100
So download the latest software 0.26.78.0 and just only type the word jointspace (i.e. 5646877223) on your remote.
That should do it!
Regards, Hugo
Download for Dutch version 0f 0.26.78.0 is here, by the way :
http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=NL&slg=AEN&sct=9000_SERIES_FLAT_TV_SE&cat=TELEVISIONS_CA&session=20111209144737_82.171.255.130&grp=SOUND_AND_VISION_GR&ctn=32PFL9604H/12&hlt=Link_Overview
If you need another language, just use country selection in the top of the screen.
Everything went fine, thanks a lot!
You're welcome, glad i could help!
Doesn't work, because the 32PFL8404 doesn't accept the Autorun.upg.
Nice try… but disappointing after all.
It should work; i just updated a PFL7404 last week. Did you unpack the zip file to a USB? Otherwise your download may be corrupted. Try a new download and unpack.
Then follow the update procedure for USB exactly (it's in the download section also). The TV should be on; you then put in the USB stick and the update should start.
Sometimes it stalls in an early stage without even starting the program (black screen). Only then, you can then take out the USB stick, switch the TV off and on and start the procedure again.
Regards, Hugo