Recent changes to Pre-Installation

WikiPage Pre-Installation modified by Rahul Patil

Rahul Patil — Wed, 14 Sep 2011 17:40:14 -0000

--- v2 
+++ v3 
@@ -9,9 +9,9 @@
 ----------------
 
 ####Downloading Required files ####
-1. Download JVS firmware from **Samfirmware** : 
-* Download Odin v1.82
-* Download Semaphore 1.7.0 Kernel
+1. Download JVS firmware from **Samfirmware** : [Download](http://hotfile.com/dl/129538506/0a079c6/I9000XXJVS.rar.html) - **PASSWORD : samfirmware.com**
+* Download Odin v1.82 : [Download](https://sourceforge.net/p/jetpackmod/wiki/Pre-Installation/attachment/I9003_Odin3%20v1.82.exe)
+* Download Semaphore 1.7.0 Kernel : [Download](https://sourceforge.net/p/jetpackmod/wiki/Pre-Installation/attachment/Semaphore_kernel_JVS_1.7.0.tar)
 ----------------
 
 ####Preparing Odin####

WikiPage Pre-Installation modified by Rahul Patil

Rahul Patil — Wed, 14 Sep 2011 17:33:04 -0000

--- v1 
+++ v2 
@@ -14,20 +14,52 @@
 * Download Semaphore 1.7.0 Kernel
 ----------------
 
-####Flashing the Base####
-1. Download JVS firmware from **Samfirmware** : 
-* Extract I9000XXJVS.rar, you'll see these files inside it - 
+####Preparing Odin####
+1. Extract I9000XXJVS.rar, you'll see these files inside it - 
     * **CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar**
     * **GT-I9000-CSC-MULTI-OXAJVS.tar**
     * **MODEM_I9000XXJVS_REV_00_CL1059471.tar**
     * **s1_odin_20100512.pit**
 * Download Odin 1.82 : 
 * Open Odin 1.82
 * Use following configuration in Odin :
     * PDA - **CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar**
     * CSC - **GT-I9000-CSC-MULTI-OXAJVS.tar**
     * PHONE - **MODEM_I9000XXJVS_REV_00_CL1059471.tar**
     * PIT - **s1_odin_20100512.pit**
     * ***CHECKED*** - Re-Partition, F.Reset Time, Auto Reboot
     * ***UNCHECKED*** - Flash Lock, Phone EFS Clear,  Phone Bootloader update
-    * ![Odin Configuration](http://i.imgur.com/Y7eSY.png)
+*![Odin Configuration](http://i.imgur.com/jAUcml.jpg)
+-----------------
+
+####Preparing Phone####
+1. Make sure Battery is fully charged
+* Remove SIM card and Memory Card if present
+* Make sure 3 Button Combo is working (Download and Recovery Mode are intact)
+* BACKUP ALL THE IMPORTANT DATA (THIS PROCESS WIPES YOUR PHONE)
+* Remove Battery, Re-insert it.
+* Press HOME + VOLUME DOWN + POWER KEY for few seconds.
+* The device is in **DOWNLOAD MODE** and ready to get flashed now.
+----------------
+
+####The actual process####
+1. Make sure Odin is OPEN (**IMPORTANT**)
+* Connect your phone to Computer.
+* I assume You've CONFIGURED Odin already in **Preparing Odin** section of this page
+* You'll see a yellow highlighted text in Odin. Just like in the image below 
+![Connected](http://i.imgur.com/oqDqw.png)
+* Your Phone and Odin is now prepared, Hit START and wait for Odin to complete the procedure.
+* After completion, phone will reboot. 
+* Congrats, Phone is now having the BASE..
+--------------------
+
+####Installing Custom Kernel (for Root, Custom recovery)####
+1. Turn off the phone and put it in Download Mode again.
+* Open Odin and select **Semaphore_kernel_JVS_1.7.0.tar** as PDA and leave rest of the configuration UNTOUCHED (Default)
+* Connect your phone to computer. 
+* After odin detects your phone, hit START.
+* Phone will reboot.
+* Your phone is rooted and having Custom Kernel now.
+
+
+In Next Wiki page, you'll see how to flash Jetpack MOD.

WikiPage Pre-Installation modified by Rahul Patil

Rahul Patil — Wed, 14 Sep 2011 17:15:38 -0000

Jetpack MOD Pre-Installation Wiki ================== ---- ## The Base ## We will need a base to flash Jetpack MOD on Samsung Galaxy S. I am using **JVS** as base at the time of writing this article. Please follow the steps given below to prepare **BASE** for JetpackMOD. ---------------- ####Downloading Required files #### 1. Download JVS firmware from **Samfirmware** : * Download Odin v1.82 * Download Semaphore 1.7.0 Kernel ---------------- ####Flashing the Base#### 1. Download JVS firmware from **Samfirmware** : * Extract I9000XXJVS.rar, you'll see these files inside it - * **CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar** * **GT-I9000-CSC-MULTI-OXAJVS.tar** * **MODEM_I9000XXJVS_REV_00_CL1059471.tar** * **s1_odin_20100512.pit** * Download Odin 1.82 : * Open Odin 1.82 * Use following configuration in Odin : * PDA - **CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar** * CSC - **GT-I9000-CSC-MULTI-OXAJVS.tar** * PHONE - **MODEM_I9000XXJVS_REV_00_CL1059471.tar** * PIT - **s1_odin_20100512.pit** * ***CHECKED*** - Re-Partition, F.Reset Time, Auto Reboot * ***UNCHECKED*** - Flash Lock, Phone EFS Clear, Phone Bootloader update * ![Odin Configuration](http://i.imgur.com/Y7eSY.png)