Jetpack MOD Pre-Installation Wiki
The Base
We will need a base to flash Jetpack MOD on Samsung Galaxy S. I am using JVS as base at the time of writing this article.
Please follow the steps given below to prepare BASE for JetpackMOD.
Downloading Required files
- Download JVS firmware from Samfirmware : Download - PASSWORD : samfirmware.com
- Download Odin v1.82 : Download
- Download Semaphore 1.7.0 Kernel : Download
Preparing Odin
- Extract I9000XXJVS.rar, you'll see these files inside it -
- CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar
- GT-I9000-CSC-MULTI-OXAJVS.tar
- MODEM_I9000XXJVS_REV_00_CL1059471.tar
- s1_odin_20100512.pit
- Download Odin 1.82 :
- Open Odin 1.82
- Use following configuration in Odin :
- PDA - CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar
- CSC - GT-I9000-CSC-MULTI-OXAJVS.tar
- PHONE - MODEM_I9000XXJVS_REV_00_CL1059471.tar
- PIT - s1_odin_20100512.pit
- CHECKED - Re-Partition, F.Reset Time, Auto Reboot
- UNCHECKED - Flash Lock, Phone EFS Clear, Phone Bootloader update
*
Preparing Phone
- Make sure Battery is fully charged
- Remove SIM card and Memory Card if present
- Make sure 3 Button Combo is working (Download and Recovery Mode are intact)
- BACKUP ALL THE IMPORTANT DATA (THIS PROCESS WIPES YOUR PHONE)
- Remove Battery, Re-insert it.
- Press HOME + VOLUME DOWN + POWER KEY for few seconds.
- The device is in DOWNLOAD MODE and ready to get flashed now.
The actual process
- Make sure Odin is OPEN (IMPORTANT)
- Connect your phone to Computer.
- I assume You've CONFIGURED Odin already in Preparing Odin section of this page
- You'll see a yellow highlighted text in Odin. Just like in the image below

- Your Phone and Odin is now prepared, Hit START and wait for Odin to complete the procedure.
- After completion, phone will reboot.
- Congrats, Phone is now having the BASE..
Installing Custom Kernel (for Root, Custom recovery)
- Turn off the phone and put it in Download Mode again.
- Open Odin and select Semaphore_kernel_JVS_1.7.0.tar as PDA and leave rest of the configuration UNTOUCHED (Default)
- Connect your phone to computer.
- After odin detects your phone, hit START.
- Phone will reboot.
- Your phone is rooted and having Custom Kernel now.
In Next Wiki page, you'll see how to flash Jetpack MOD.