jboss-dev-forums — The jboss development forum posts

[Jboss-dev-forums] [Design of JBoss Collaboration Server] - Setup JBoss Collaboration Server on Solaris with non-gui mod

[varamthanapon <do-...@jb...>]

How can I detup JBoss Collaboration Server on Solaris with non-gui mode?
Could you told me .......please....

I using MYSQL ,SOLARIS and already Have JBosss running,
What I need to do?


Which is better to separate JBoss CS and JBoss AS..
or put JBoss CS in JBoss AS ...

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956468#3956468

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956468

[Jboss-dev-forums] [Design of JBoss Eclipse IDE (dev)] - JBossSeam IDE proposal

[<mcu...@jb...>]

Thomas Heute has forwarded us a proposal for JBossSeam IDE.. I've posted the proposal as an attachment to a JIRA task here:

[url]http://jira.jboss.com/jira/browse/JBIDE-337[url]

Opening this thread for dicussion..



View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956445#3956445

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956445

[Jboss-dev-forums] [Design of JCA on JBoss] - Re: JCA and JAXB

[<sco...@jb...>]

The customization support in jaxb was not sufficient for handling object/xml mapping in the past. The parsing required of the jboss.xml file is an example. 

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956443#3956443

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956443

[Jboss-dev-forums] [Design of JBoss ESB] - Re: Amendments to the Build Deploy Doc

[mohit309 <do-...@jb...>]

Daniel,

Do let me know when the test case is ready or how I can help to write them.  I want to understand the architecture of Rosetta too. If possible do send me some write up on it. 

Thanks,
Mohit

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956427#3956427

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956427

[Jboss-dev-forums] [Design of JBoss ESB] - Re: Amendments to the Build Deploy Doc

[<dan...@jb...>]

Mohit, what would you like to do for a test?

We are working on a more comprehensice test case which you will be able to test with soon.

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956423#3956423

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956423

[Jboss-dev-forums] [Design of JBossCache] - Re: Pluggable state transfer factory

[<ben...@jb...>]

We can sync up on this. It depends when to migrate the SPI. I am hoping to do it in 2.0 that way if we need to modify any part API we still can. I will need about one week after your finish the API and SPI codes. I have created a Jira to track this effort:

http://jira.jboss.com/jira/browse/JBCACHE-685


View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956402#3956402

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956402

[Jboss-dev-forums] [Design of JCA on JBoss] - Re: JCA and JAXB

[<wes...@jb...>]

An external mapping file can allow for differences in the xsd->object model if necessary. I could see this if they object model was something more than just dumb data containers, but in parsing deployment descriptors, that's exactly what the object model is. The meta data is just a wrapper of the underlying XML. 

I guess I am seeing it in terms of 

1) Code elimination
2) Ease of use
3) A technology that is already a part of our stack (at least this is what was discussed on one of the R&D conference calls)






View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956396#3956396

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956396

[Jboss-dev-forums] [Design of JCA on JBoss] - Re: JCA and JAXB

[<sco...@jb...>]

My fundamental problem with jaxb is that is drives the java model from schema/xml and as such has limitations. I want the java object model to be what it needs to be, not fit into something that jaxb can support. 

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956384#3956384

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956384

[Jboss-dev-forums] [Design of EJB 3.0] - Re: using MC beanfactory for configuration

[<sco...@jb...>]

As described, two bean factories with extension points in a jboss_5 xml schema makes sense. Shouldn't there be a general container framework in the unified aop/mc project that can be used of the basis of any context requiring a container with aspects and instance control?


View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956383#3956383

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956383

[Jboss-dev-forums] [Design of JBoss ESB] - Re: Amendments to the Build Deploy Doc

[mohit309 <do-...@jb...>]

I was able to sucessfully build and deploy the ESB EAR in JBoss App server and have configured the ESB to use MySql. 
My next steps will be to test the App. Can someone help me create a sample test or guide me to build one.

Here is MySQL DDL Dump.

-- MySQL dump 10.10
--
-- Host: localhost    Database: rosetta
-- ------------------------------------------------------
-- Server version	5.0.22-community-nt

/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;
/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;
/*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;
/*!40101 SET NAMES utf8 */;
/*!40103 SET @OLD_TIME_ZONE=@@TIME_ZONE */;
/*!40103 SET TIME_ZONE='+00:00' */;
/*!40014 SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS, UNIQUE_CHECKS=0 */;
/*!40014 SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0 */;
/*!40101 SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='NO_AUTO_VALUE_ON_ZERO' */;
/*!40111 SET @OLD_SQL_NOTES=@@SQL_NOTES, SQL_NOTES=0 */;

--
-- Table structure for table `batches`
--

DROP TABLE IF EXISTS `batches`;
CREATE TABLE `batches` (
  `batch_num` bigint(20) NOT NULL,
  `seq` int(11) NOT NULL,
  `data` text,
  PRIMARY KEY  (`batch_num`,`seq`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;

--
-- Dumping data for table `batches`
--


/*!40000 ALTER TABLE `batches` DISABLE KEYS */;
LOCK TABLES `batches` WRITE;
UNLOCK TABLES;
/*!40000 ALTER TABLE `batches` ENABLE KEYS */;

--
-- Table structure for table `object_snap`
--

DROP TABLE IF EXISTS `object_snap`;
CREATE TABLE `object_snap` (
  `uid` bigint(20) NOT NULL,
  `stamp` bigint(20) default NULL,
  `snap_type` text,
  `object_uid` bigint(20) default NULL,
  `batch_num` bigint(20) default NULL,
  `xml_data` text,
  PRIMARY KEY  (`uid`),
  KEY `ix1_object_snap` USING BTREE (`batch_num`,`uid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;

--
-- Dumping data for table `object_snap`
--


/*!40000 ALTER TABLE `object_snap` DISABLE KEYS */;
LOCK TABLES `object_snap` WRITE;
UNLOCK TABLES;
/*!40000 ALTER TABLE `object_snap` ENABLE KEYS */;

--
-- Table structure for table `people_index`
--

DROP TABLE IF EXISTS `people_index`;
CREATE TABLE `people_index` (
  `uid` bigint(20) NOT NULL,
  `stamp` bigint(20) default NULL,
  `latest_snap_uid` bigint(20) default NULL,
  `latest_snap_date` text,
  `name` text,
  `phone` text,
  `address` text,
  PRIMARY KEY  (`uid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;

--
-- Dumping data for table `people_index`
--


/*!40000 ALTER TABLE `people_index` DISABLE KEYS */;
LOCK TABLES `people_index` WRITE;
UNLOCK TABLES;
/*!40000 ALTER TABLE `people_index` ENABLE KEYS */;

--
-- Table structure for table `uid_table`
--

DROP TABLE IF EXISTS `uid_table`;
CREATE TABLE `uid_table` (
  `uid` int(11) NOT NULL,
  `sequence_name` text NOT NULL,
  `last_used_uid` bigint(20) NOT NULL,
  PRIMARY KEY  (`uid`),
  UNIQUE KEY `ix1_uid_table` (`sequence_name`(767))
) ENGINE=InnoDB DEFAULT CHARSET=latin1;

--
-- Dumping data for table `uid_table`
--


/*!40000 ALTER TABLE `uid_table` DISABLE KEYS */;
LOCK TABLES `uid_table` WRITE;
INSERT INTO `uid_table` VALUES (1,'jbossEsb_objuid',10500000),(2,'jbossEsb_batchuid',251000);
UNLOCK TABLES;
/*!40000 ALTER TABLE `uid_table` ENABLE KEYS */;
/*!40103 SET TIME_ZONE=@OLD_TIME_ZONE */;

/*!40101 SET SQL_MODE=@OLD_SQL_MODE */;
/*!40014 SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS */;
/*!40014 SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS */;
/*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */;
/*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */;
/*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */;
/*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */;


Thanks,
Mohit Keswani


View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956381#3956381

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956381

[Jboss-dev-forums] [Design of JCA on JBoss] - Re: JCA and JAXB

[<wes...@jb...>]

Sigh...sorry...the 

anonymous wrote : 
  | I converted the *-ds.xml file to a schema represenation
  | 

Should read ...converted the jboss-ds_1_X.dtd(s)



View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956360#3956360

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956360

[Jboss-dev-forums] [Design of JCA on JBoss] - JCA and JAXB

[<wes...@jb...>]

I converted the *-ds.xml file to a schema represenation (simple conversion using Oxygen, nothing fancy), ran it through the latest xjc compiler, unmarshalled a *-ds.xml document etc, etc. 

Is there any reason why we shouldn't be using this technology over XB. I can understand for the existing ra.xml stuff since it's already done, but for the ds.xml it would seem to make sense at the very least it would eliminate a lot of code that doesn't do anything besides XML binding which JAXB already provides.

I know that we are going to be using the JAXB RI in 5.0 moving forward so IMO we should go ahead and start leveraging this. In many ways, I would be inclined to replace the ResourceAdapterObjectModel factory as well.






View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956359#3956359

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956359

[Jboss-dev-forums] [Design of Kosmos] - Re: enable to open webdav chart on remote host....

[aron.gombas <do-...@jb...>]

Hi!

I'm pretty sure it's a configuration problem, so plz double-check what URLs are generated for the chart images. It's easy to test if a URL is correct, you just drop it into your browser and you should the image, that's it.

Plz note that you can configure the URLs generated by Kosmos-server, by setting a property for the webdav bean in kosmos-services-servlet.xml:


  |   <!-- WebDAV static content store -->
  |   <bean id="webdavStaticContentStore" class="hu.midori.kosmos.server.store.WebdavStaticContentStore">
  | 	<property name="webdavUrl" value="http://localhost:8080/slide/files"/><!-- Both HTTP and HTTPS protocol can be used here. -->
  | 	<property name="webdavUser" value=""/>
  | 	<property name="webdavPassword" value=""/>
  | 	<!--
  | 	  This URL will be used as base URL for the generated images.
  | 	  If you don't specify anything here, the value of "webdavUrl"
  | 	  will be used. Uncomment this, if you want to override that.
  | 
  | 	  <property name="clientUrl" value="http://myserver/my-webdav/kosmos-images"/>
  | 	-->
  |   </bean>
  | 

HTH.

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956357#3956357

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956357

[Jboss-dev-forums] [Design of JBoss Portal] - Re: Struts Portlet in JBoss Portal

[billytcj <do-...@jb...>]

There is a sample portlet with struts in PortletSwap section (http://labs.jboss.com/portal/portletswap/downloads/portlets/framework).
Hope this is helping you.

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956336#3956336

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956336

[Jboss-dev-forums] [Design of JBoss Collaboration Server] - Re: how to test POP3 in Outlook

[<go...@ic...>]

anonymous wrote : I am using MySQL 5. I am out of the office right now but there's an option that I've checked in outlook something like delete after some days. Will this have an effect? 
  | 

Yes, will have an affect.  May be whats causing it, but depends how many days, and if sent recently, and dissappearing, then maybe time's are diff. on each box?

anonymous wrote : 
  | I will try to check it out on Monday. But I've been thinking about Jason's suggestion to remove security. I remember when I installed it it requires SSL when sending but there is no security when receiving POP3. I will try to reinstall it and remove the security.
  | 
if it requires SSL when sending, then you wouldnt have been able to authenticate as you did, when you showed/posted the telnet output.

Unless sending to yo...@do..., then it would be in allowed domain list, i think.

anonymous wrote : 
  | I have observed when I try the send/receive option in Outlook I can see the ff quick messages - Authenticating ... and then Disconnecting. I am not very familiar with this stuff so basically I don't know how to test it. I don't even know how to see the logs in Outlook.
  | 

I am using cheesey a$$ outlook express, but does job excellent, I think you can right click a "folder", and see where ot is storing it's data, it is something like "c:\doc* and set*\you\apllication data..."

you can then turn enhanced debug, within outlook express, for SMTP, then you can check the logs, they will be in that folder as refrenced by "folder"->properties

I would, definitely reinstall, it took me more than 25 times of reinstalling before i got it worked out, if you like, post screen shots of each screen and your settings, preferably in jpg or some compressed format, but if you cant do this, at the end of install it asks you if you want to create an install script, say yes, then post that file, it contains I believe all the settings associated with the install

anonymous wrote : 
  | I am using Outlook bec. most people use it but if I have the time I will try Mozilla. But I assume this shouldn't be a problem. Anyway, I appreciate all your help. Thanks and have a good weekend.
  | 

doh, that brings up a good point, I always test our mail server with outlook, must remember the "test cases", i.e. need to try diff. clients

probly not a problem, though andrew may think of a jira issue, related to outlook and m4, your not sending large files or attachments?  didnt look like it from telnet, though outlook may have caused server to deleted them

you have a good weekend also!  and good luck!


View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956332#3956332

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956332

[Jboss-dev-forums] [Design of JBoss Collaboration Server] - Re: how to test POP3 in Outlook

[enazareno <do-...@jb...>]

Hi Andrew and Jason,

    I am using MySQL 5.  I am out of the office right now but there's an option that I've checked in outlook something like delete after some days. Will this have an effect? I will try to check it out on Monday. But I've been thinking about Jason's suggestion to remove security. I remember when I installed it it requires SSL when sending but there is no security when receiving POP3. I will try to reinstall it and remove the security. I have observed when I try the send/receive option in Outlook I can see the ff quick messages - Authenticating ... and then Disconnecting. I am not very familiar with this stuff so basically I don't know how to test it. I don't even know how to see the logs in Outlook. I am using Outlook bec. most people use it but if I have the time I will try Mozilla. But I assume this shouldn't be a problem. Anyway, I appreciate all your help. Thanks and have a good weekend.

Regards,

Elmo

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956329#3956329

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956329

[Jboss-dev-forums] [Design of JBoss internal QA (Test Suite)] - Re: Standalone release of jboss-test

[rrajesh <do-...@jb...>]

The example starts up the "all" config as shown in <server:start name="all"/> in build.xml

Your code snippet shows the "default" config being started.
C:\jboss-4.0.4/lib/endorsed org.jboss.Main -c default -b localhost

In case you had updated the build.xml to start the default config, please update the <server:config> to default as well.

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956293#3956293

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956293

[Jboss-dev-forums] [Design of Security on JBoss] - XACML Integration in JBoss 5.0

[<ani...@jb...>]

Now that the following JIRA issues have been resolved, I want to update the community about XACML Integration with the web and ejb layers.

http://jira.jboss.com/jira/browse/JBAS-2673
http://jira.jboss.com/jira/browse/JBAS-3324

I have the first cut of xacml 2.0 integrated with the web and the ejb layers in jboss 5.0 (Branch: HEAD). There is scope for integration with other layers (on demand). 

Utilized the Open Source Sun XACML project as the integration foundation (Policy Decision Point).  Given this, we basically needed a mechanism to generate the XACML requests, because the parsing of the xacml policy files were taken care of by the foundation(SunXACML).

We have a XACMLPolicyModule that can be plugged into the authorization framework and this can take an injected delegate map based on the layers (Resource.WEB and Resource.EJB  or whatever). The delegates for the layer are the Policy Enforcement Points (PEP) that take in the information that is provided via the contextual map of the Resource interfacehttp://fisheye.jboss.com/viewrep/JBoss/jbosssx/src/main/org/jboss/security/authorization/Resource.java
and build the xacml request.

At the current level of integration, an xacml policy file is located by the presence of "jboss-xacml-policy.xml" in the WEB-INF/META-INF of your web/ejb deployment.

As always there is scope for improvement and based on advanced user needs, we will work on the xacml layer.

In the future, I would like to refactor the layer to provide pluggable PDP.

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956277#3956277

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956277

[Jboss-dev-forums] [Deployers on JBoss (Deployers/JBoss)] - Re: Error redeploying dependent war

[<sco...@jb...>]

We can't be redeploying the war from destroy service as this should be causing a redeployment infinite recursion when the war is undeployed. Also, we can't be introducing specific logic into only one deployer. The changes to have dependencies trigger redeployments needs to be handled at the system level with changes to the base ServiceController/SubDeployer logic. 

This is not much of a priority for 4.x since we are redoing the deployers in the jboss5/mc update.


View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956270#3956270

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956270

[Jboss-dev-forums] [Design of EJB 3.0] - Fail to try first example in "Enterprise JavaBean 3.0"

[iamar <do-...@jb...>]

Hi,

I am trying the first example in "Enterprise JavaBeans 3.0" / chapter 4 and for some reason I am keep getting the following error message: "TravelAgentBean not bound".


package titan.Clients;

import titan.travelagent.TravelAgentRemote;
import titan.domain.Cabin;

import javax.naming.InitialContext;
import javax.naming.Context;
import javax.naming.NamingException;
import java.util.Properties;
import javax.rmi.PortableRemoteObject;

public class Clients {
	public static void main(String[] args) {
		try{
			Context jndiContext = getInitialContext();
			Object ref = jndiContext.lookup("TravelAgentBean/remote"); 
			TravelAgentRemote dao = (TravelAgentRemote) PortableRemoteObject.narrow(ref, TravelAgentRemote.class);
			
			Cabin cabin_1 = new Cabin();
			cabin_1.setId(1);
			cabin_1.setName("Master Suite");
			cabin_1.setDeckLevel(1);
			cabin_1.setShipId(1);
			cabin_1.setBedCount(3);
			
			dao.createCabin(cabin_1);
			
			Cabin cabin_2 = dao.findCabin(1);
			System.out.println(cabin_2.getName());
			System.out.println(cabin_2.getDeckLevel());
			System.out.println(cabin_2.getShipId());
			System.out.println(cabin_2.getBedCount());
		}
		catch(NamingException ne) {ne.printStackTrace();}
	}

	public static Context getInitialContext() throws NamingException {
		Properties p = new Properties();
		p.put(Context.INITIAL_CONTEXT_FACTORY,"org.jnp.interfaces.NamingContextFactory");
		p.put(Context.URL_PKG_PREFIXES,"org.jboss.naming:org.jnp.interfaces");
		p.put(Context.PROVIDER_URL,"jnp://localhost:1099");
		return new InitialContext(p);
	}
}


Also, I would like to mention that when I run JBoss I see the following error message: "No ClassLoaders for titan.travelagent.TravelAgentBean"

Please Helpppppp....


View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956261#3956261

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956261

[Jboss-dev-forums] [Design of JBoss internal QA (Test Suite)] - Re: Standalone release of jboss-test

[msegvich <do-...@jb...>]

Forgot to mention I already had added that property to the build.xml.  You can see it on the stdout as part of the classpath (c:\jboss-4.0.4).

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956248#3956248

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956248

[Jboss-dev-forums] [Design of JBoss Collaboration Server] - Re: how to test POP3 in Outlook

[<go...@ic...>]

Andrew, cant this also occur, when messages are actually being delivered, i.e. delivered to outlook, but user forgot to uncheck "remove/delete messages from server"

then they would'nt exist in messagedata, but would exist elsewhere?

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956247#3956247

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956247

[Jboss-dev-forums] [Design of JBoss Collaboration Server] - Re: how to test POP3 in Outlook

[<go...@ic...>]

oh, yeah, that looks a little messed up...messagedata is empty, where in it looks like you have actually received about 44 emails

as andrew has pointed out, did you mess with the headers in anyway, as I think thats whats in message data, mainly

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956246#3956246

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956246

[Jboss-dev-forums] [Design of JBoss Collaboration Server] - Re: MailListener should return null or a message?

[sappenin <do-...@jb...>]

Ok.  I've submitted a patch via JIRA.  Here's the link:
http://jira.jboss.org/jira/browse/JBMAIL-241

Essentially: If a given mail listner (i.e., JMSMailListener) completely processes a mail, the function contract stipulates that the listener should return 'null'. Unfortunately, not all of the JBCS listeners deal well with a null message, so the MailListenerChainService should detect if a null message is received from any listener. If so, the listener should abort the processing of the remaining listeners.

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956216#3956216

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956216

[Jboss-dev-forums] [Design of EJB 3.0] - using MC beanfactory for configuration

[<bil...@jb...>]

We need to finally think about how we are going to replace standardjboss.xml from the old EJB 2.1 container.  One thought that comes to mind is that we define Microcontainer BeanFactories in XML for each container type.  We want this standardjboss.xml replacement to be as generic as possible.

We do already have the notion of an AOP AspectDomain, but this is really not good enough as we will want to inject things into the EJBContainer like the Timerservice that is being used, the MBeanServer, TM, etc...  We also need the ability to define default ActivationSpecs and things like that.  With the AspectDomain, you *can* overload/define new annotations in XML, but we need the ability to define generically other configuration items.

There has been some work in MC land with JBoss AOP integration.  So I'm thinking that one beanfactory definition in XML would also include the aspect domain definition for the template for that type of EJB Container.

So, we have to think of how this all wires together.  We may need two different beanfactories.  One for creating EJBContainers, the other for instantiating EJB instances themselves.  The user may want to define their own injections/configuration for EJB instances.  For the EJB instances, we may want to extend the jboss.xml schema to allow the extension and definition of a beanfactory for the EJB.

Hope this makes sense, let's think and discuss more.

View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3956210#3956210

Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3956210