Menu
▾
▴
SF.net SVN: jazzplusplus:[835] trunk/jazz
|
From: <pst...@us...> - 2011-03-23 00:23:55
|
Revision: 835
http://jazzplusplus.svn.sourceforge.net/jazzplusplus/?rev=835&view=rev
Author: pstieber
Date: 2011-03-23 00:23:45 +0000 (Wed, 23 Mar 2011)
Log Message:
-----------
Let autoreconf --install copy these.
Removed Paths:
-------------
trunk/jazz/config/depcomp
trunk/jazz/config/install-sh
trunk/jazz/config/ltmain.sh
trunk/jazz/config/missing
trunk/jazz/config/mkinstalldirs
trunk/jazz/m4/libtool.m4
trunk/jazz/m4/ltoptions.m4
trunk/jazz/m4/ltsugar.m4
trunk/jazz/m4/ltversion.m4
trunk/jazz/m4/lt~obsolete.m4
Deleted: trunk/jazz/config/depcomp
===================================================================
--- trunk/jazz/config/depcomp 2011-03-22 23:54:45 UTC (rev 834)
+++ trunk/jazz/config/depcomp 2011-03-23 00:23:45 UTC (rev 835)
@@ -1,584 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2006-10-15.18
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <ol...@dc...>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug...@gn...>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
- stat=$?
-
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- outname="$stripped.o"
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
- sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
- "$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- "$@" || exit $?
- IFS=" "
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
Deleted: trunk/jazz/config/install-sh
===================================================================
--- trunk/jazz/config/install-sh 2011-03-22 23:54:45 UTC (rev 834)
+++ trunk/jazz/config/install-sh 2011-03-23 00:23:45 UTC (rev 835)
@@ -1,507 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- shift
- shift
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src ;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dstarg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dstarg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst ;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix=/ ;;
- -*) prefix=./ ;;
- *) prefix= ;;
- esac
-
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
-
- oIFS=$IFS
- IFS=/
- $posix_glob && set -f
- set fnord $dstdir
- shift
- $posix_glob && set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
- || {
- echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- } || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
Deleted: trunk/jazz/config/ltmain.sh
===================================================================
--- trunk/jazz/config/ltmain.sh 2011-03-22 23:54:45 UTC (rev 834)
+++ trunk/jazz/config/ltmain.sh 2011-03-23 00:23:45 UTC (rev 835)
@@ -1,8406 +0,0 @@
-# Generated from ltmain.m4sh.
-
-# ltmain.sh (GNU libtool) 2.2.6b
-# Written by Gordon Matzigkeit <go...@gn...>, 1996
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions. There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# GNU Libtool is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print informational messages (default)
-# --version print version information
-# -h, --help print short or long help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.2.6b
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to <bug...@gn...>.
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=2.2.6b
-TIMESTAMP=""
-package_revision=1.3017
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# NLS nuisances: We save the old values to restore during execute mode.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
- fi"
-done
-
-$lt_unset CDPATH
-
-
-
-
-
-: ${CP="cp -f"}
-: ${ECHO="echo"}
-: ${EGREP="/bin/grep -E"}
-: ${FGREP="/bin/grep -F"}
-: ${GREP="/bin/grep"}
-: ${LN_S="ln -s"}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SED="/bin/sed"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-# Generated shell functions inserted here.
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-# In the unlikely event $progname began with a '-', it would play havoc with
-# func_echo (imagine progname=-n), so we prepend ./ in that case:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-case $progname in
- -*) progname=./$progname ;;
-esac
-
-# Make sure we have an absolute path for reexecution:
-case $progpath in
- [\\/]*|[A-Za-z]:\\*) ;;
- *[\\/]*)
- progdir=$func_dirname_result
- progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
- ;;
- *)
- save_IFS="$IFS"
- IFS=:
- for progdir in $PATH; do
- IFS="$save_IFS"
- test -x "$progdir/$progname" && break
- done
- IFS="$save_IFS"
- test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
- $ECHO "$progname${mode+: }$mode: $*"
-}
-
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
-
- # A bug in bash halts the script if the last line of a function
- # fails when set -e is in force, so we need another command to
- # work around that:
- :
-}
-
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
- $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
-}
-
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
-
- # bash bug again:
- :
-}
-
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
-
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information." ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
- $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
- my_directory_path="$1"
- my_dir_list=
-
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
- esac
-
- # While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
- # ...make a list in topmost first order. Use a colon delimited
- # list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
-
- # If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
-
- # ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
- done
- my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
-
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
- # try to create one of the directories concurrently. Don't
- # stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
- done
- IFS="$save_mkdir_p_IFS"
-
- # Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
- fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$opt_dry_run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
- fi
-
- $ECHO "X$my_tmpdir" | $Xsed
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
-{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
-
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
- ;;
- *)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
- esac
-}
-
-
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
-{
- case $1 in
- *[\\\`\"]*)
- my_arg=`$ECHO "X$1" | $Xsed \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
- *)
- my_arg="$1" ;;
- esac
-
- case $my_arg in
- # Double-quote args containing shell metacharacters to delay
- # word splitting and command substitution for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
- ;;
- esac
-
- func_quote_for_expand_result="$my_arg"
-}
-
-
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
-
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
-
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
-
-
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it. Use the saved locale for evaluation.
-func_show_eval_locale ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
-
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
-
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
-
-
-
-
-
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
- $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
-}
-
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
-{
- $SED -n '/^# Usage:/,/# -h/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- $ECHO
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
-}
-
-# func_help
-# Echo long help message to standard output and exit.
-func_help ()
-{
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
- p
- }' < "$progpath"
- exit $?
-}
-
-# func_missing_arg argname
-# Echo program name prefixed message to standard error and set global
-# exit_cmd.
-func_missing_arg ()
-{
- func_error "missing argument for $1"
- exit_cmd=exit
-}
-
-exit_cmd=:
-
-
-
-
-
-# Check that we have a working $ECHO.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
- # Yippee, $ECHO works!
- :
-else
- # Restart under the correct shell, and then maybe $ECHO will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-# $mode is unset
-nonopt=
-execute_dlfiles=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-opt_dry_run=false
-opt_duplicate_deps=false
-opt_silent=false
-opt_debug=:
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_fatal_configuration arg...
-# Echo program name prefixed message to standard error, followed by
-# a configuration failure hint, and exit.
-func_fatal_configuration ()
-{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
-}
-
-
-# func_config
-# Display the configuration for all the tags in this script.
-func_config ()
-{
- re_begincf='^# ### BEGIN LIBTOOL'
- re_endcf='^# ### END LIBTOOL'
-
- # Default configuration.
- $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
- done
-
- exit $?
-}
-
-# func_features
-# Display the features supported by this script.
-func_features ()
-{
- $ECHO "host: $host"
- if test "$build_libtool_libs" = yes; then
- $ECHO "enable shared libraries"
- else
- $ECHO "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- $ECHO "enable static libraries"
- else
- $ECHO "disable static libraries"
- fi
-
- exit $?
-}
-
-# func_enable_tag tagname
-# Verify that TAGNAME is valid, and either flag an error and exit, or
-# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
-# variable here.
-func_enable_tag ()
-{
- # Global variable:
- tagname="$1"
-
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
-
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
- *)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
-
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
-}
-
-# Parse options once, thoroughly. This comes as soon as possible in
-# the script to make things like `libtool --version' happen quickly.
-{
-
- # Shorthand for --mode=foo, only valid as the first argument
- case $1 in
- clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
- compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
- execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
- finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
- install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
- link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
- uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
- esac
-
- # Parse non-mode specific arguments:
- while test "$#" -gt 0; do
- opt="$1"
- shift
-
- case $opt in
- --config) func_config ;;
-
- --debug) preserve_args="$preserve_args $opt"
- func_echo "enabling shell trace mode"
- opt_debug='set -x'
- $opt_debug
- ;;
-
- -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
- execute_dlfiles="$execute_dlfiles $1"
- shift
- ;;
-
- --dry-run | -n) opt_dry_run=: ;;
- --features) func_features ;;
- --finish) mode="finish" ;;
-
- --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
- case $1 in
- # Valid mode arguments:
- clean) ;;
- compile) ;;
- execute) ;;
- finish) ;;
- install) ;;
- link) ;;
- relink) ;;
- uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
- esac
-
- mode="$1"
- shift
- ;;
-
- --preserve-dup-deps)
- opt_duplicate_deps=: ;;
-
- --quiet|--silent) preserve_args="$preserve_args $opt"
- opt_silent=:
- ;;
-
- --verbose| -v) preserve_args="$preserve_args $opt"
- opt_silent=false
- ;;
-
- --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
- preserve_args="$preserve_args $opt $1"
- func_enable_tag "$1" # tagname is set here
- shift
- ;;
-
- # Separate optargs to long options:
- -dlopen=*|--mode=*|--tag=*)
- func_opt_split "$opt"
- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
- shift
- ;;
-
- -\?|-h) func_usage ;;
- --help) opt_help=: ;;
- --version) func_version ;;
-
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
-
- *) nonopt="$opt"
- break
- ;;
- esac
- done
-
-
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
- ;;
- esac
-
- # Having warned about all mis-specified options, bail out if
- # anything was wrong.
- $exit_cmd $EXIT_FAILURE
-}
-
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
- fi
-
- exit $EXIT_MISMATCH
- fi
-}
-
-
-## ----------- ##
-## Main. ##
-## ----------- ##
-
-$opt_help || {
- # Sanity checks first:
- func_check_version_match
-
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
- fi
-
- test -z "$mode" && func_fatal_error "error: you must specify a MODE."
-
-
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
-
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$mode' for more information."
-}
-
-
-# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_lalib_p ()
-{
- test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
-# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function implements the same check as func_lalib_p without
-# resorting to external programs. To this end, it redirects stdin and
-# closes it afterwards, without saving the original file descriptor.
-# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
-func_lalib_unsafe_p ()
-{
- lalib_p=no
- if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
- for lalib_p_l in 1 2 3 4
- do
- read lalib_p_line
- case "$lalib_p_line" in
- \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
- esac
- done
- exec 0<&5 5<&-
- fi
- test "$lalib_p" = yes
-}
-
-# func_ltwrapper_script_p file
-# True iff FILE is a libtool wrapper script
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_script_p ()
-{
- func_lalib_p "$1"
-}
-
-# func_ltwrapper_executable_p file
-# True iff FILE is a libtool wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_executable_p ()
-{
- func_ltwrapper_exec_suffix=
- case $1 in
- *.exe) ;;
- *) func_ltwrapper_exec_suffix=.exe ;;
- esac
- $GREP "$magic_exe" "$1$func_l...
[truncated message content] |
