Menu
▾
▴
SF.net SVN: jazzplusplus:[739] trunk/jazz
|
From: <pst...@us...> - 2010-01-07 15:14:34
|
Revision: 739
http://jazzplusplus.svn.sourceforge.net/jazzplusplus/?rev=739&view=rev
Author: pstieber
Date: 2010-01-07 15:14:24 +0000 (Thu, 07 Jan 2010)
Log Message:
-----------
Updated the autotools files.
Modified Paths:
--------------
trunk/jazz/Makefile.am
trunk/jazz/config/ltmain.sh
trunk/jazz/configure.ac
Added Paths:
-----------
trunk/jazz/m4/
trunk/jazz/m4/acinclude.m4
trunk/jazz/m4/libtool.m4
trunk/jazz/m4/ltoptions.m4
trunk/jazz/m4/ltsugar.m4
trunk/jazz/m4/ltversion.m4
trunk/jazz/m4/lt~obsolete.m4
Removed Paths:
-------------
trunk/jazz/config/acinclude.m4
Modified: trunk/jazz/Makefile.am
===================================================================
--- trunk/jazz/Makefile.am 2009-12-03 14:43:42 UTC (rev 738)
+++ trunk/jazz/Makefile.am 2010-01-07 15:14:24 UTC (rev 739)
@@ -1,6 +1,6 @@
## Process this file with automake to produce Makefile.in
-ACLOCAL_FLAGS=-I config
+ACLOCAL_AMFLAGS=-I m4
SUBDIRS = src conf
Deleted: trunk/jazz/config/acinclude.m4
===================================================================
--- trunk/jazz/config/acinclude.m4 2009-12-03 14:43:42 UTC (rev 738)
+++ trunk/jazz/config/acinclude.m4 2010-01-07 15:14:24 UTC (rev 739)
@@ -1,370 +0,0 @@
-dnl ---------------------------------------------------------------------------
-dnl Macros for the Jazz++ application configure.ac
-dnl ---------------------------------------------------------------------------
-
-dnl ---------------------------------------------------------------------------
-dnl Macros for wxWidgets detection. Typically used in configure.in as:
-dnl
-dnl AC_ARG_ENABLE(...)
-dnl AC_ARG_WITH(...)
-dnl ...
-dnl AM_OPTIONS_WXCONFIG
-dnl ...
-dnl ...
-dnl AM_PATH_WXCONFIG(2.6.0, wxWin=1)
-dnl if test "$wxWin" != 1; then
-dnl AC_MSG_ERROR([
-dnl wxWidgets must be installed on your system
-dnl but wx-config script couldn't be found.
-dnl
-dnl Please check that wx-config is in path, the directory
-dnl where wxWidgets libraries are installed (returned by
-dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
-dnl equivalent variable and wxWidgets version is 2.3.4 or above.
-dnl ])
-dnl fi
-dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
-dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
-dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
-dnl
-dnl LIBS="$LIBS $WX_LIBS"
-dnl ---------------------------------------------------------------------------
-
-dnl ---------------------------------------------------------------------------
-dnl AM_OPTIONS_WXCONFIG
-dnl
-dnl adds support for --wx-prefix, --wx-exec-prefix, --with-wxdir and
-dnl --wx-config command line options
-dnl ---------------------------------------------------------------------------
-
-AC_DEFUN([AM_OPTIONS_WXCONFIG],
-[
- AC_ARG_WITH(wxdir,
- [ --with-wxdir=PATH Use uninstalled version of wxWidgets in PATH],
- [ wx_config_name="$withval/wx-config"
- wx_config_args="--inplace"])
- AC_ARG_WITH(wx-config,
- [ --with-wx-config=CONFIG wx-config script to use (optional)],
- wx_config_name="$withval" )
- AC_ARG_WITH(wx-prefix,
- [ --with-wx-prefix=PREFIX Prefix where wxWidgets is installed (optional)],
- wx_config_prefix="$withval", wx_config_prefix="")
- AC_ARG_WITH(wx-exec-prefix,
- [ --with-wx-exec-prefix=PREFIX
- Exec prefix where wxWidgets is installed (optional)],
- wx_config_exec_prefix="$withval", wx_config_exec_prefix="")
-])
-
-dnl Helper macro for checking if wx version is at least $1.$2.$3, set's
-dnl wx_ver_ok=yes if it is:
-AC_DEFUN([_WX_PRIVATE_CHECK_VERSION],
-[
- wx_ver_ok=""
- if test "x$WX_VERSION" != x ; then
- if test $wx_config_major_version -gt $1; then
- wx_ver_ok=yes
- else
- if test $wx_config_major_version -eq $1; then
- if test $wx_config_minor_version -gt $2; then
- wx_ver_ok=yes
- else
- if test $wx_config_minor_version -eq $2; then
- if test $wx_config_micro_version -ge $3; then
- wx_ver_ok=yes
- fi
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl ---------------------------------------------------------------------------
-dnl AM_PATH_WXCONFIG(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
-dnl [, WX-LIBS [, ADDITIONAL-WX-CONFIG-FLAGS]]]])
-dnl
-dnl Test for wxWidgets, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
-dnl (the latter is for static linking against wxWidgets). Set WX_CONFIG_NAME
-dnl environment variable to override the default name of the wx-config script
-dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this
-dnl case the macro won't even waste time on tests for its existence.
-dnl
-dnl Optional WX-LIBS argument contains comma- or space-separated list of
-dnl wxWidgets libraries to link against (it may include contrib libraries). If
-dnl it is not specified then WX_LIBS and WX_LIBS_STATIC will contain flags to
-dnl link with all of the core wxWidgets libraries.
-dnl
-dnl Optional ADDITIONAL-WX-CONFIG-FLAGS argument is appended to wx-config
-dnl invocation command in present. It can be used to fine-tune lookup of
-dnl best wxWidgets build available.
-dnl
-dnl Example use:
-dnl AM_PATH_WXCONFIG([2.6.0], [wxWin=1], [wxWin=0], [html,core,net]
-dnl [--unicode --debug])
-dnl ---------------------------------------------------------------------------
-
-dnl
-dnl Get the cflags and libraries from the wx-config script
-dnl
-AC_DEFUN([AM_PATH_WXCONFIG],
-[
- dnl do we have wx-config name: it can be wx-config or wxd-config or ...
- if test x${WX_CONFIG_NAME+set} != xset ; then
- WX_CONFIG_NAME=wx-config
- fi
-
- if test "x$wx_config_name" != x ; then
- WX_CONFIG_NAME="$wx_config_name"
- fi
-
- dnl deal with optional prefixes
- if test x$wx_config_exec_prefix != x ; then
- wx_config_args="$wx_config_args --exec-prefix=$wx_config_exec_prefix"
- WX_LOOKUP_PATH="$wx_config_exec_prefix/bin"
- fi
- if test x$wx_config_prefix != x ; then
- wx_config_args="$wx_config_args --prefix=$wx_config_prefix"
- WX_LOOKUP_PATH="$WX_LOOKUP_PATH:$wx_config_prefix/bin"
- fi
- if test "$cross_compiling" = "yes"; then
- wx_config_args="$wx_config_args --host=$host_alias"
- fi
-
- dnl don't search the PATH if WX_CONFIG_NAME is absolute filename
- if test -x "$WX_CONFIG_NAME" ; then
- AC_MSG_CHECKING(for wx-config)
- WX_CONFIG_PATH="$WX_CONFIG_NAME"
- AC_MSG_RESULT($WX_CONFIG_PATH)
- else
- AC_PATH_PROG(WX_CONFIG_PATH, $WX_CONFIG_NAME, no, "$WX_LOOKUP_PATH:$PATH")
- fi
-
- if test "$WX_CONFIG_PATH" != "no" ; then
- WX_VERSION=""
-
- min_wx_version=ifelse([$1], ,2.2.1,$1)
- if test -z "$5" ; then
- AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version])
- else
- AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version ($5)])
- fi
-
- WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5 $4"
-
- WX_VERSION=`$WX_CONFIG_WITH_ARGS --version 2>/dev/null`
- wx_config_major_version=`echo $WX_VERSION | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- wx_config_minor_version=`echo $WX_VERSION | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- wx_config_micro_version=`echo $WX_VERSION | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
- wx_requested_major_version=`echo $min_wx_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- wx_requested_minor_version=`echo $min_wx_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- wx_requested_micro_version=`echo $min_wx_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
- _WX_PRIVATE_CHECK_VERSION([$wx_requested_major_version],
- [$wx_requested_minor_version],
- [$wx_requested_micro_version])
-
- if test -n "$wx_ver_ok"; then
-
- AC_MSG_RESULT(yes (version $WX_VERSION))
- WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs`
-
- dnl is this even still appropriate? --static is a real option now
- dnl and WX_CONFIG_WITH_ARGS is likely to contain it if that is
- dnl what the user actually wants, making this redundant at best.
- dnl For now keep it in case anyone actually used it in the past.
- AC_MSG_CHECKING([for wxWidgets static library])
- WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs 2>/dev/null`
- if test "x$WX_LIBS_STATIC" = "x"; then
- AC_MSG_RESULT(no)
- else
- AC_MSG_RESULT(yes)
- fi
-
- dnl starting with version 2.2.6 wx-config has --cppflags argument
- wx_has_cppflags=""
- if test $wx_config_major_version -gt 2; then
- wx_has_cppflags=yes
- else
- if test $wx_config_major_version -eq 2; then
- if test $wx_config_minor_version -gt 2; then
- wx_has_cppflags=yes
- else
- if test $wx_config_minor_version -eq 2; then
- if test $wx_config_micro_version -ge 6; then
- wx_has_cppflags=yes
- fi
- fi
- fi
- fi
- fi
-
- dnl starting with version 2.7.0 wx-config has --rescomp option
- wx_has_rescomp=""
- if test $wx_config_major_version -gt 2; then
- wx_has_rescomp=yes
- else
- if test $wx_config_major_version -eq 2; then
- if test $wx_config_minor_version -ge 7; then
- wx_has_rescomp=yes
- fi
- fi
- fi
- if test "x$wx_has_rescomp" = x ; then
- dnl cannot give any useful info for resource compiler
- WX_RESCOMP=
- else
- WX_RESCOMP=`$WX_CONFIG_WITH_ARGS --rescomp`
- fi
-
- if test "x$wx_has_cppflags" = x ; then
- dnl no choice but to define all flags like CFLAGS
- WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags`
- WX_CPPFLAGS=$WX_CFLAGS
- WX_CXXFLAGS=$WX_CFLAGS
-
- WX_CFLAGS_ONLY=$WX_CFLAGS
- WX_CXXFLAGS_ONLY=$WX_CFLAGS
- else
- dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS
- WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags`
- WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags`
- WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags`
-
- WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"`
- WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"`
- fi
-
- ifelse([$2], , :, [$2])
-
- else
-
- if test "x$WX_VERSION" = x; then
- dnl no wx-config at all
- AC_MSG_RESULT(no)
- else
- AC_MSG_RESULT(no (version $WX_VERSION is not new enough))
- fi
-
- WX_CFLAGS=""
- WX_CPPFLAGS=""
- WX_CXXFLAGS=""
- WX_LIBS=""
- WX_LIBS_STATIC=""
- WX_RESCOMP=""
- ifelse([$3], , :, [$3])
-
- fi
- else
-
- WX_CFLAGS=""
- WX_CPPFLAGS=""
- WX_CXXFLAGS=""
- WX_LIBS=""
- WX_LIBS_STATIC=""
- WX_RESCOMP=""
-
- ifelse([$3], , :, [$3])
-
- fi
-
- AC_SUBST(WX_CPPFLAGS)
- AC_SUBST(WX_CFLAGS)
- AC_SUBST(WX_CXXFLAGS)
- AC_SUBST(WX_CFLAGS_ONLY)
- AC_SUBST(WX_CXXFLAGS_ONLY)
- AC_SUBST(WX_LIBS)
- AC_SUBST(WX_LIBS_STATIC)
- AC_SUBST(WX_VERSION)
- AC_SUBST(WX_RESCOMP)
-])
-
-dnl ---------------------------------------------------------------------------
-dnl Get information on the wxrc program for making C++, Python and xrs
-dnl resource files.
-dnl
-dnl AC_ARG_ENABLE(...)
-dnl AC_ARG_WITH(...)
-dnl ...
-dnl AM_OPTIONS_WXCONFIG
-dnl ...
-dnl AM_PATH_WXCONFIG(2.6.0, wxWin=1)
-dnl if test "$wxWin" != 1; then
-dnl AC_MSG_ERROR([
-dnl wxWidgets must be installed on your system
-dnl but wx-config script couldn't be found.
-dnl
-dnl Please check that wx-config is in path, the directory
-dnl where wxWidgets libraries are installed (returned by
-dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
-dnl equivalent variable and wxWidgets version is 2.6.0 or above.
-dnl ])
-dnl fi
-dnl
-dnl AM_PATH_WXRC([HAVE_WXRC=1], [HAVE_WXRC=0])
-dnl if test "x$HAVE_WXRC" != x1; then
-dnl AC_MSG_ERROR([
-dnl The wxrc program was not installed or not found.
-dnl
-dnl Please check the wxWidgets installation.
-dnl ])
-dnl fi
-dnl
-dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
-dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
-dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
-dnl
-dnl LDFLAGS="$LDFLAGS $WX_LIBS"
-dnl ---------------------------------------------------------------------------
-
-
-
-dnl ---------------------------------------------------------------------------
-dnl AM_PATH_WXRC([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl
-dnl Test for wxWidgets' wxrc program for creating either C++, Python or XRS
-dnl resources. The variable WXRC will be set and substituted in the configure
-dnl script and Makefiles.
-dnl
-dnl Example use:
-dnl AM_PATH_WXRC([wxrc=1], [wxrc=0])
-dnl ---------------------------------------------------------------------------
-
-dnl
-dnl wxrc program from the wx-config script
-dnl
-AC_DEFUN([AM_PATH_WXRC],
-[
- AC_ARG_VAR([WXRC], [Path to wxWidget's wxrc resource compiler])
-
- if test "x$WX_CONFIG_NAME" = x; then
- AC_MSG_ERROR([The wxrc tests must run after wxWidgets test.])
- else
-
- AC_MSG_CHECKING([for wxrc])
-
- if test "x$WXRC" = x ; then
- dnl wx-config --utility is a new addition to wxWidgets:
- _WX_PRIVATE_CHECK_VERSION(2,5,3)
- if test -n "$wx_ver_ok"; then
- WXRC=`$WX_CONFIG_WITH_ARGS --utility=wxrc`
- fi
- fi
-
- if test "x$WXRC" = x ; then
- AC_MSG_RESULT([not found])
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT([$WXRC])
- ifelse([$1], , :, [$1])
- fi
-
- AC_SUBST(WXRC)
- fi
-])
Modified: trunk/jazz/config/ltmain.sh
===================================================================
--- trunk/jazz/config/ltmain.sh 2009-12-03 14:43:42 UTC (rev 738)
+++ trunk/jazz/config/ltmain.sh 2010-01-07 15:14:24 UTC (rev 739)
@@ -1,52 +1,83 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <go...@gn...>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
+# Generated from ltmain.m4sh.
+
+# ltmain.sh (GNU libtool) 2.2.6b
+# Written by Gordon Matzigkeit <go...@gn...>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print informational messages (default)
+# --version print version information
+# -h, --help print short or long help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.2.6b
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug...@gn...>.
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.5.24
-TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
+VERSION=2.2.6b
+TIMESTAMP=""
+package_revision=1.3017
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
@@ -60,99 +91,262 @@
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- SP2NL='tr \040 \012'
- NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- SP2NL='tr \100 \n'
- NL2SP='tr \r\n \100\100'
- ;;
-esac
-
-# NLS nuisances.
+# NLS nuisances: We save the old values to restore during execute mode.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
+ save_$lt_var=\$$lt_var
+ $lt_var=C
export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
fi"
done
+$lt_unset CDPATH
+
+
+
+
+
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/bin/sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
# Make sure IFS has a sensible default
lt_nl='
'
IFS=" $lt_nl"
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- $echo "$modename: not configured to build any kind of library" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
-fi
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
+# Generated shell functions inserted here.
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+ -*) progname=./$progname ;;
+esac
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=:
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname${mode+: }$mode: $*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
# func_mktempdir [string]
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
@@ -161,7 +355,7 @@
{
my_template="${TMPDIR-/tmp}/${1-$progname}"
- if test "$run" = ":"; then
+ if test "$opt_dry_run" = ":"; then
# Return a directory name, but don't create it in dry-run mode
my_tmpdir="${my_template}-$$"
else
@@ -170,486 +364,743 @@
my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
- save_mktempdir_umask=`umask`
- umask 0077
- $mkdir "$my_tmpdir"
- umask $save_mktempdir_umask
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || {
- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
- exit $EXIT_FAILURE
- }
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
fi
- $echo "X$my_tmpdir" | $Xsed
+ $ECHO "X$my_tmpdir" | $Xsed
}
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
{
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
esac
- ;;
- esac
- $echo $win32_libid_type
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
}
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
{
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "X$1" | $Xsed \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
*)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case "$@ " in
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit $EXIT_FAILURE
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
}
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
{
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
- exit $EXIT_FAILURE
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
fi
}
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
{
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
- my_status=""
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
- $show "${rm}r $my_gentop"
- $run ${rm}r "$my_gentop"
- $show "$mkdir $my_gentop"
- $run $mkdir "$my_gentop"
- my_status=$?
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
- exit $my_status
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
fi
+}
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- extracted_serial=`expr $extracted_serial + 1`
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
- $show "${rm}r $my_xdir"
- $run ${rm}r "$my_xdir"
- $show "$mkdir $my_xdir"
- $run $mkdir "$my_xdir"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
- exit $exit_status
- fi
- case $host in
- *-darwin*)
- $show "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- if test -z "$run"; then
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
- if test -n "$darwin_arches"; then
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- $show "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- ${rm}r unfat-$$
- cd "$darwin_orig_dir"
- else
- cd "$darwin_orig_dir"
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- fi # $run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
- func_extract_archives_result="$my_oldobjs"
+
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
}
-# End of Shell function definitions
-#####################################
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $SED -n '/^# Usage:/,/# -h/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ $ECHO
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
-disable_libs=no
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ p
+ }' < "$progpath"
+ exit $?
+}
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
- arg="$1"
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ func_error "missing argument for $1"
+ exit_cmd=exit
+}
+
+exit_cmd=:
+
+
+
+
+
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell, and then maybe $ECHO will work.
+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit $EXIT_SUCCESS
+fi
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
- preserve_args="${preserve_args}=$arg"
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- $echo "$progname: invalid tag name: $tagname" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
+# Global variables.
+# $mode is unset
+nonopt=
+execute_dlfiles=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
- case $tagname in
- CC)
- # Don't test for the "default" C tag, as we know, it's there, but
- # not specially marked.
- ;;
- *)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
- else
- $echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- esac
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
- prev=
- prevopt=
- continue
- fi
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
- --version)
- echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-Copyright (C) 2007 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $?
- ;;
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
- --config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
# Now print the configurations for the tags.
for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
done
+
exit $?
- ;;
+}
- --debug)
- $echo "$progname: enabling shell trace mode"
- set -x
- preserve_args="$preserve_args $arg"
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- $echo "host: $host"
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ $ECHO "host: $host"
if test "$build_libtool_libs" = yes; then
- $echo "enable shared libraries"
+ $ECHO "enable shared libraries"
else
- $echo "disable shared libraries"
+ $ECHO "disable shared libraries"
fi
if test "$build_old_libs" = yes; then
- $echo "enable static libraries"
+ $ECHO "enable static libraries"
else
- $echo "disable static libraries"
+ $ECHO "disable static libraries"
fi
+
exit $?
- ;;
+}
- --finish) mode="finish" ;;
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
- --preserve-dup-deps) duplicate_deps="yes" ;;
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
- --quiet | --silent)
- show=:
- preserve_args="$preserve_args $arg"
- ;;
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
- --tag)
- prevopt="--tag"
- prev=tag
- preserve_args="$preserve_args --tag"
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# Parse options once, thoroughly. This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
+{
+
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- preserve_args="$preserve_args --tag"
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
;;
-
- *)
- nonopt="$arg"
- break
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
esac
-done
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
-fi
+ # Parse non-mode specific arguments:
+ while test "$#" -gt 0; do
+ opt="$1"
+ shift
-case $disable_libs in
-no)
- ;;
-shared)
- build_libtool_libs=no
- build_old_libs=yes
- ;;
-static)
- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
- ;;
-esac
+ case $opt in
+ --config) func_config ;;
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
+ --debug) preserve_args="$preserve_args $opt"
+ func_echo "enabling shell trace mode"
+ opt_debug='set -x'
+ $opt_debug
+ ;;
-if test -z "$show_help"; then
+ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ execute_dlfiles="$execute_dlfiles $1"
+ shift
+ ;;
- # Infer the operation mode.
- if test -z "$mode"; then
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
- case $nonopt in
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
+ --dry-run | -n) opt_dry_run=: ;;
+ --features) func_features ;;
+ --finish) mode="finish" ;;
+
+ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ case $1 in
+ # Valid mode arguments:
+ clean) ;;
+ compile) ;;
+ execute) ;;
+ finish) ;;
+ install) ;;
+ link) ;;
+ relink) ;;
+ uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+
+ mode="$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_duplicate_deps=: ;;
+
+ --quiet|--silent) preserve_args="$preserve_args $opt"
+ opt_silent=:
+ ;;
+
+ --verbose| -v) preserve_args="$preserve_args $opt"
+ opt_silent=false
+ ;;
+
+ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ preserve_args="$preserve_args $opt $1"
+ func_enable_tag "$1" # tagname is set here
+ shift
+ ;;
+
+ # Separate optargs to long options:
+ -dlopen=*|--mode=*|--tag=*)
+ func_opt_split "$opt"
+ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) opt_help=: ;;
+ --version) func_version ;;
+
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+
+ *) nonopt="$opt"
+ break
+ ;;
+ esac
+ done
+
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
;;
- *db | *dbx | *strace | *truss)
- mode=execute
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
+ esac
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
+ # Having warned about all mis-specified options, bail out if
+ # anything was wrong.
+ $exit_cmd $EXIT_FAILURE
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
fi
- ;;
- esac
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
fi
+}
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+$opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+
# Only execute mode is allowed to have -dlopen flags.
if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
exit $EXIT_FAILURE
fi
# Change the help message to a mode-specific one.
generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
+ help="Try \`$progname --help --mode=$mode' for more information."
+}
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_ltwrapper_scriptname_result=""
+ if func_ltwrapper_executable_p "$1"; then
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ fi
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ done
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ i...
[truncated message content] |
