SF.net SVN: jazzplusplus: [515] tex2rtf

[<pst...@us...>]

Revision: 515
          http://jazzplusplus.svn.sourceforge.net/jazzplusplus/?rev=515&view=rev
Author:   pstieber
Date:     2008-05-11 23:50:53 -0700 (Sun, 11 May 2008)

Log Message:
-----------
Added a forked version of tex2rtf.  The code has a patch applied that allows
it to build with a version of wxWidgets that is built using stl options.
A complete build system is not in place and will have to be added.  The
wxWidgets project is no longer using this code to build documentation
and will not include it in post 2.8.* distributions.  The fork was OKed
on the wxWidgets developer list by Julian Smart, the original author of
this code.

Added Paths:
-----------
    tex2rtf/
    tex2rtf/distrib/
    tex2rtf/distrib/distrib.rsp
    tex2rtf/distrib/howto.txt
    tex2rtf/distrib/innobott.txt
    tex2rtf/distrib/innotop.txt
    tex2rtf/distrib/makedistrib.sh
    tex2rtf/distrib/makeinno.bat
    tex2rtf/distrib/maketarball.sh
    tex2rtf/distrib/src.rsp
    tex2rtf/distrib/tex2rtf.exe.manifest
    tex2rtf/distrib/tex2rtf.spec
    tex2rtf/distrib/zipdistinno.bat
    tex2rtf/distrib/zipsrc.bat
    tex2rtf/distrib/zipsrc.sh
    tex2rtf/docs/
    tex2rtf/docs/Makefile
    tex2rtf/docs/back.gif
    tex2rtf/docs/bullet.bmp
    tex2rtf/docs/contents.gif
    tex2rtf/docs/fancyhea.sty
    tex2rtf/docs/forward.gif
    tex2rtf/docs/gpl.txt
    tex2rtf/docs/install.txt
    tex2rtf/docs/lgpl.txt
    tex2rtf/docs/licence.txt
    tex2rtf/docs/makefile.vc
    tex2rtf/docs/makeidx.sty
    tex2rtf/docs/mysober.sty
    tex2rtf/docs/mytitle.sty
    tex2rtf/docs/notes.txt
    tex2rtf/docs/psbox.tex
    tex2rtf/docs/readme.txt
    tex2rtf/docs/refs.bib
    tex2rtf/docs/screen.bmp
    tex2rtf/docs/screen.gif
    tex2rtf/docs/screen.shg
    tex2rtf/docs/tex2rtf.hpj
    tex2rtf/docs/tex2rtf.ini
    tex2rtf/docs/tex2rtf.tex
    tex2rtf/docs/tex2rtf.wmf
    tex2rtf/docs/texhelp.sty
    tex2rtf/docs/up.gif
    tex2rtf/src/
    tex2rtf/src/.cvsignore
    tex2rtf/src/bmputils.h
    tex2rtf/src/htmlutil.cpp
    tex2rtf/src/makefile.bcc
    tex2rtf/src/makefile.gcc
    tex2rtf/src/makefile.unx
    tex2rtf/src/makefile.vc
    tex2rtf/src/makefile.wat
    tex2rtf/src/makengui.nt
    tex2rtf/src/maths.cpp
    tex2rtf/src/readshg.cpp
    tex2rtf/src/readshg.h
    tex2rtf/src/rtfutils.cpp
    tex2rtf/src/rtfutils.h
    tex2rtf/src/symbols.h
    tex2rtf/src/table.cpp
    tex2rtf/src/table.h
    tex2rtf/src/tex2any.cpp
    tex2rtf/src/tex2any.h
    tex2rtf/src/tex2rtf.bkl
    tex2rtf/src/tex2rtf.cpp
    tex2rtf/src/tex2rtf.h
    tex2rtf/src/tex2rtf.ico
    tex2rtf/src/tex2rtf.ini
    tex2rtf/src/tex2rtf.rc
    tex2rtf/src/tex2rtf.xpm
    tex2rtf/src/tex2rtf_tex2rtf.dsp
    tex2rtf/src/tex2rtf_tex2rtf_gui.dsp
    tex2rtf/src/texutils.cpp
    tex2rtf/src/wxhlpblk.h
    tex2rtf/src/xlputils.cpp
    tex2rtf/tools/
    tex2rtf/tools/suppresswarnings.sh

Added: tex2rtf/distrib/distrib.rsp
===================================================================
--- tex2rtf/distrib/distrib.rsp	                        (rev 0)
+++ tex2rtf/distrib/distrib.rsp	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,26 @@
+docs/*.tex
+docs/*.sty
+docs/*.bib
+docs/*.hpj
+docs/*.ini
+docs/*.txt
+docs/*.cnt
+docs/*.eps
+docs/*.bmp
+docs/*.gif
+docs/*.wmf
+docs/*.shg
+docs/makefile.vc
+docs/Makefile
+
+tex2rtf.exe
+tex2rtf.chm
+lacheck.exe
+lacheck.txt
+readme.txt
+licence.txt
+lgpl.txt
+gpl.txt
+tex2rtf.exe.manifest
+tex2rtf_src.zip
+

Added: tex2rtf/distrib/howto.txt
===================================================================
--- tex2rtf/distrib/howto.txt	                        (rev 0)
+++ tex2rtf/distrib/howto.txt	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,23 @@
+How to make an RPM distribution of Tex2RTF
+==================================================
+
+You can make the RPM with standard commands: first make source tarball 
+with zipsrc.sh and then run 
+
+    rpm -ta tex2rtf-2.01-source.tar.bz2 
+
+to create both tex2rtf-2.01-1.src.rpm and tex2rtf-2.01-1.$(arch).rpm
+
+This builds the Tex2RTF binary using wxBase.
+
+Note that the 2.01 binaries have been built in completely
+different ways right now :-(
+
+The RPM has been built with wxBase, and the .tar.gz
+distribution has been built using wxGTK (but with no
+UI). All command-line versions should be built
+with wxBase in future, since the wxBase one is
+smaller.
+
+Julian Smart/Vaclav Slavik, August 2002
+


Property changes on: tex2rtf/distrib/howto.txt
___________________________________________________________________
Name: svn:eol-style
   + native

Added: tex2rtf/distrib/innobott.txt
===================================================================
--- tex2rtf/distrib/innobott.txt	                        (rev 0)
+++ tex2rtf/distrib/innobott.txt	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,38 @@
+; For debug beta only
+;    Source: c:\winnt\system32\msvcrtd.dll; DestDir: {sys}\; DestName: msvcrtd.dll; CopyMode: onlyifdoesntexist; Flags: uninsneveruninstall
+
+[Tasks]
+
+	Name: desktopicon; Description: "Create a &desktop icon"; GroupDescription: "Additional icons:"
+
+[Icons]
+    Name: {group}\Tex2RTF TEX2RTFVERSION; Filename: {app}\tex2rtf.exe; WorkingDir: {app}; IconFilename: {app}\tex2rtf.exe; IconIndex: 0
+    Name: {group}\Tex2RTF Help; Filename: {app}\tex2rtf.chm; WorkingDir: {app}; IconIndex: 0; Flags: useapppaths
+    Name: {group}\Tex2RTF Licence; Filename: {app}\licence.txt; WorkingDir: {app}; IconIndex: 0; Flags: useapppaths
+    Name: {userdesktop}\Tex2RTF TEX2RTFVERSION; Filename: {app}\tex2rtf.exe; WorkingDir: {app}; IconFilename: {app}\tex2rtf.exe; IconIndex: 0; Tasks: desktopicon
+
+[Registry]
+
+[UninstallDelete]
+
+[InstallDelete]
+
+[Run] 
+	Filename: "{app}\tex2rtf.exe"; Description: "Launch Tex2RTF"; Flags: postinstall nowait skipifsilent
+
+[UninstallRun]
+
+
+; ==============================================
+; The lines below are used by ScriptMaker
+; They are not required by Inno Setup
+; DO NOT DELETE THEM or you may be unable to reload the script
+
+;[ScriptSetup]
+;VerNum=TEX2RTFVERSION
+;InnoVer=1.3
+;AddVerTo=AppVerName
+;SetupFilename=setup.exe
+;OutputFolder=C:\wx2dev\wxWidgets\deliver
+;CopyrightText=Copyright \xA9 Julian Smart, 2002
+


Property changes on: tex2rtf/distrib/innobott.txt
___________________________________________________________________
Name: svn:eol-style
   + native

Added: tex2rtf/distrib/innotop.txt
===================================================================
--- tex2rtf/distrib/innotop.txt	                        (rev 0)
+++ tex2rtf/distrib/innotop.txt	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,47 @@
+; Inno Setup Script
+; Created with ScriptMaker Version 1.3.22
+; 14 February 2001 at 10:38
+
+[Setup]
+    MinVersion=4.0,4.0
+    AppName=Tex2RTF TEX2RTFVERSION
+    AppId=Tex2RTF
+    CreateUninstallRegKey=1
+    UsePreviousAppDir=1
+    UsePreviousGroup=1
+    AppVersion=TEX2RTFVERSION
+    AppVerName=Tex2RTF TEX2RTFVERSION
+    AppCopyright=Copyright \xA9 Julian Smart and others, 2002
+;    BackColor=$FF0000
+;    BackColor2=$000000
+    BackColor=$800000
+    BackColor2=$C71F1F
+    BackColorDirection=toptobottom
+    WindowShowCaption=1
+    WindowStartMaximized=1
+    WindowVisible=1
+    WindowResizable=1
+    UninstallLogMode=Append
+    DirExistsWarning=auto
+    UninstallFilesDir={app}
+    DisableDirPage=0
+    DisableStartupPrompt=1
+    CreateAppDir=1
+    DisableProgramGroupPage=0
+    AlwaysCreateUninstallIcon=1
+    Uninstallable=1
+    UninstallIconName=Uninstall Tex2RTF TEX2RTFVERSION
+    UninstallDisplayName=Tex2RTF TEX2RTFVERSION
+    DefaultDirName={pf}\Tex2RTF
+    DefaultGroupName=Tex2RTF TEX2RTFVERSION
+    MessagesFile=compiler:default.isl
+    DiskSpanning=0
+    DiskSize=1457664
+    DiskClusterSize=512
+    ReserveBytes=0
+    UseSetupLdr=1
+    LicenseFile=c:\wx2dev\wxWidgets\utils\tex2rtf\docs\licence.txt
+    InfoAfterFile=c:\wx2dev\wxWidgets\utils\tex2rtf\docs\readme.txt
+    SourceDir=c:\wx2dev\wxWidgets\deliver\tex2rtf
+    OutputDir=c:\wx2dev\wxWidgets\deliver
+


Property changes on: tex2rtf/distrib/innotop.txt
___________________________________________________________________
Name: svn:eol-style
   + native

Added: tex2rtf/distrib/makedistrib.sh
===================================================================
--- tex2rtf/distrib/makedistrib.sh	                        (rev 0)
+++ tex2rtf/distrib/makedistrib.sh	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,12 @@
+#!/bin/sh
+# Example script to call the maketarball.sh
+# script, for creating the Tex2RTF distribution.
+echo Make the Tex2RTF distribution
+
+WXWIN=/opt/julians/wx2dev/wxWindows
+VERSION=2.01
+TEX2RTFBIN=$WXWIN/utils/tex2rtf/deliver/tex2rtf
+DESTDIR=$WXWIN/utils/tex2rtf/deliver
+
+$WXWIN/utils/tex2rtf/distrib/maketarball.sh $WXWIN $TEX2RTFBIN $DESTDIR $VERSION
+sh zipsrc.sh $VERSION


Property changes on: tex2rtf/distrib/makedistrib.sh
___________________________________________________________________
Name: svn:executable
   + *
Name: svn:eol-style
   + native

Added: tex2rtf/distrib/makeinno.bat
===================================================================
--- tex2rtf/distrib/makeinno.bat	                        (rev 0)
+++ tex2rtf/distrib/makeinno.bat	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,70 @@
+@echo off
+Rem Make an Inno Setup distribution list, where files and dirs are represented by
+Rem sections like this:
+Rem [Dirs]
+Rem     Name: {app}\backgrounds
+Rem 
+Rem [Files]
+Rem     Source: C:\dir\file.htm; DestDir: {app}\; DestName: file.htm
+
+set tex2rtf=%WXWIN%\utils\tex2rtf
+
+Rem Generate a list of all files in the distribution.
+Rem We have to be in the right directory already.
+dir /BS >& %TEMP%\files1.tmp
+
+Rem Now we iterate through the list of files, writing out the middle section of
+Rem the file.
+Rem We have to remove the first part of the path,
+Rem by truncating the start by the size of the current directory.
+
+set sz=%@EVAL[%@LEN[%_CWD]+1]
+set len=%@LINES[%TEMP\files1.tmp]
+
+erase /Y %TEMP\files2.tmp
+
+Rem Add directories
+echo. >> %temp\files2.tmp
+echo [Dirs] >> %temp\files2.tmp
+
+do i = 0 to %len by 1
+    set line=%@LINE[%TEMP\files1.tmp,%i]
+    Rem Skip files.
+    if not isdir %line enddo
+    set sz2=%@LEN[%line]
+    set n=%@EVAL[%sz2-%sz]
+    set line2=%@SUBSTR[%line,%sz,%n]
+    if "%line2%" == "" enddo
+
+    echo   Name: {app}\%line2 >> %TEMP\files2.tmp
+enddo
+
+echo. >>%TEMP\files2.tmp
+
+Rem Add files
+
+echo. >> %temp\files2.tmp
+echo [Files] >> %temp\files2.tmp
+
+do i = 0 to %len by 1
+    set line=%@LINE[%TEMP\files1.tmp,%i]
+    Rem Skip directories.
+    if isdir %line enddo
+    set sz2=%@LEN[%line]
+    set n=%@EVAL[%sz2-%sz]
+    set line2=%@SUBSTR[%line,%sz,%n]
+    set filename=%@FILENAME[%line2]
+    set dirname=%@PATH[%line2]
+
+    echo   Source: %line; DestDir: {app}\%dirname; DestName: %filename >> %TEMP\files2.tmp
+enddo
+
+Rem Concatenate the 3 sections
+cat %tex2rtf%\distrib\innotop.txt %TEMP%\files2.tmp %tex2rtf%\distrib\innobott.txt > %tex2rtf%\distrib\tex2rtf.iss
+
+erase /Y %TEMP\files1.tmp
+rem erase /Y %TEMP\files2.tmp
+
+goto end
+
+:end


Property changes on: tex2rtf/distrib/makeinno.bat
___________________________________________________________________
Name: svn:executable
   + *

Added: tex2rtf/distrib/maketarball.sh
===================================================================
--- tex2rtf/distrib/maketarball.sh	                        (rev 0)
+++ tex2rtf/distrib/maketarball.sh	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+# Make a distribution of Tex2RTF for Unix
+# Julian Smart 2002-08-07
+# Usage: maketarball.sh wx-dir bin-file deliver-dir version-no [ options ]
+# For example: maketarball.sh ~/wx2dev/wxWindows /bin/tex2rtf /tmp/tex2rtf-deliver
+# Where:
+# wx-dir is the wxWindows source tree
+# bin-file is the Tex2RTF binary, already compiled
+# deliver-dir is the directory the distribution will be put in
+# version-no is the version, e.g. 2.01
+
+TEX2RTFDIR=$1/utils/tex2rtf
+SRC=$TEX2RTFDIR/src
+BINARYSRC=$2
+DEST=$3
+BUILD=0
+UPX=0
+PROGNAME=$0
+VERSION=$4
+
+dotar()
+{
+    # Make the documentation first
+    cd $TEX2RTFDIR/docs
+    make htb
+
+    rm -f -r $DEST/tex2rtf-*.*
+
+    mkdir -p $DEST/tex2rtf-$VERSION
+    mkdir -p $DEST/tex2rtf-$VERSION/tools
+    mkdir -p $DEST/tex2rtf-$VERSION/docs
+    mkdir -p $DEST/tex2rtf-$VERSION/html
+
+    # Make the source archive
+    cd $TEX2RTFDIR
+    ls `cat $TEX2RTFDIR/distrib/src.rsp` > /tmp/tex2rtf.txt
+    tar cvf $DEST/tex2rtf-$VERSION/tex2rtf-$VERSION-source.tar -T /tmp/tex2rtf.txt
+    gzip $DEST/tex2rtf-$VERSION/tex2rtf-$VERSION-source.tar
+    rm /tmp/tex2rtf.txt
+
+    cd $DEST/tex2rtf-$VERSION
+
+    # Copy the binary and other files
+    cp $BINARYSRC tex2rtf
+    cp $TEX2RTFDIR/docs/readme.txt readme.txt
+    cp $TEX2RTFDIR/docs/licence.txt .
+    cp $TEX2RTFDIR/docs/gpl.txt .
+    cp $TEX2RTFDIR/docs/lgpl.txt .
+    cp $TEX2RTFDIR/docs/*.html $TEX2RTFDIR/docs/*.gif html
+    cp $TEX2RTFDIR/docs/tex2rtf.htb .
+
+    # Copy all the doc sources, so that the user can experiment
+    # on the Tex2RTF docs 
+    cp $TEX2RTFDIR/docs/*.tex $TEX2RTFDIR/docs/*.ini $TEX2RTFDIR/docs/*.sty $TEX2RTFDIR/docs/*.bib $TEX2RTFDIR/docs/*.gif $TEX2RTFDIR/docs/*.tex docs
+
+    strip tex2rtf
+
+    if [ "$UPX" != "0" ]; then
+        upx tex2rtf
+    fi
+
+    cd ..
+    
+    tar cvf $DEST/tex2rtf-$VERSION-i386.tar tex2rtf-$VERSION/*
+    gzip -c $DEST/tex2rtf-$VERSION-i386.tar > $DEST/tex2rtf-$VERSION-i386.tar.gz
+    bzip2 -c $DEST/tex2rtf-$VERSION-i386.tar > $DEST/tex2rtf-$VERSION-i386.tar.bz2
+}
+
+usage()
+{
+    echo Usage: $PROGNAME "wx-dir bin-file deliver-dir version-no [ options ]"
+    echo Options:
+    echo "    --help         Display this help message"
+    echo "    --upx          Compress executable with UPX"
+    echo For example: $PROGNAME ~/wx2dev/wxWindows /tmp/tex2rtf /tmp/tex2rtf-deliver 2.0
+    exit 1
+}
+
+# Process command line options.
+shift 4
+for i in "$@"; do
+    case "$i" in
+	--upx) UPX=1 ;;
+	*)
+	    usage
+	    exit
+	    ;;
+    esac
+done
+
+if [ ! -d "$DEST" ]; then
+    mkdir -p $DEST
+fi
+
+if [ ! -d "$SRC" ]; then
+    echo Source directory $SRC not found.
+    usage
+    exit 1
+fi
+
+if [ ! -f "$BINARYSRC" ]; then
+    echo tex2rtf binary $BINARYSRC not found.
+    usage
+    exit 1
+fi
+
+if [ "$VERSION" = "" ]; then
+    echo Pass the version number as the fourth argument.
+    usage
+    exit 1
+fi
+
+echo Creating Version $VERSION distribution in $DEST, using source directory $SRC and tex2rtf binary $BINARYSRC.
+
+dotar
+
+echo Tex2RTF archived.
+


Property changes on: tex2rtf/distrib/maketarball.sh
___________________________________________________________________
Name: svn:executable
   + *
Name: svn:eol-style
   + native

Added: tex2rtf/distrib/src.rsp
===================================================================
--- tex2rtf/distrib/src.rsp	                        (rev 0)
+++ tex2rtf/distrib/src.rsp	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,44 @@
+Makefile.in
+
+src/*.cpp
+src/*.h
+src/makefile.vc
+src/makefile.bcc
+src/makefile.dos
+src/makefile.b32
+src/makefile.wat
+src/makefile.unx
+src/makefile.g95
+src/makengui.nt
+src/Makefile.in
+src/*.dsp
+src/*.dsw
+src/*.xpm
+src/*.ini
+src/*.bmp
+src/*.ico
+src/*.def
+src/*.rc
+
+tools/*.*
+
+distrib/*.sh
+distrib/*.bat
+distrib/*.txt
+distrib/*.rsp
+distrib/tex2rtf.exe.manifest
+distrib/*.spec
+
+docs/*.tex
+docs/*.sty
+docs/*.bib
+docs/*.hpj
+docs/*.ini
+docs/*.txt
+docs/*.bmp
+docs/*.gif
+docs/*.wmf
+docs/*.shg
+docs/makefile.vc
+docs/Makefile
+

Added: tex2rtf/distrib/tex2rtf.exe.manifest
===================================================================
--- tex2rtf/distrib/tex2rtf.exe.manifest	                        (rev 0)
+++ tex2rtf/distrib/tex2rtf.exe.manifest	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,23 @@
+<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
+<assembly
+   xmlns="urn:schemas-microsoft-com:asm.v1"
+   manifestVersion="1.0">
+<assemblyIdentity
+    processorArchitecture="x86"
+    version="5.1.0.0"
+    type="win32"
+    name="tex2rtf.exe"/>
+    <description>Foo program</description>
+    <dependency>
+    <dependentAssembly>
+    <assemblyIdentity
+         type="win32"
+         name="Microsoft.Windows.Common-Controls"
+         version="6.0.0.0"
+         publicKeyToken="6595b64144ccf1df"
+         language="*"
+         processorArchitecture="x86"/>
+    </dependentAssembly>
+    </dependency>
+</assembly>
+

Added: tex2rtf/distrib/tex2rtf.spec
===================================================================
--- tex2rtf/distrib/tex2rtf.spec	                        (rev 0)
+++ tex2rtf/distrib/tex2rtf.spec	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,67 @@
+
+Name:          tex2rtf
+Version:       2.01
+Release:       1
+Source:        %{name}-%{version}-source.tar.bz2
+
+Prefix:        /usr
+Summary:       Program to convert from LaTeX to RTF and HTML
+Copyright:     wxWindows Library License
+Group:         Applications/Editors
+URL:           http://www.wxwindows.org/tex2rtf
+Packager:      Vaclav Slavik <vac...@ma...>
+
+%define wxwin_version 2.3
+BuildRequires: wxBase-devel >= 2.3.2
+BuildRequires: wxBase-static >= 2.3.2
+BuildRoot:     /var/tmp/%{name}-%{version}-root
+
+%description
+Tex2RTF is a program originally written by Julian Smart to convert 
+from a LaTeX subset to four other formats:
+
+* Linear RTF, for importing into a wide range of word processors.
+* Windows Help hypertext RTF, for compilation with HC (Help Compiler).
+* HTML (Hypertext Markup Language), with ordinary HTML mode and 
+  Microsoft HTML Help/wxWindows HTML Help mode.
+* XLP wxHelp format, the original wxWindows toolkit help format. 
+  This format is now obsolete.
+
+Tex2RTF parses a 'reasonable' subset of LaTeX, notable blind spots being 
+the tabbing environment and maths. However, don't expect to translate 
+your LaTeX files immediately with no alteration of your source files, since 
+the objective is more to have a portable document source language than to 
+convert old LaTeX files.
+
+%prep
+%setup -n %{name}-%{version}-source
+
+%build
+
+# build tex2rtf binary:
+pushd `pwd`
+cd src
+make -f makefile.unx \
+    "CXXFLAGS=$RPM_OPT_FLAGS `wxbase-%{wxwin_version}-config --static --cxxflags` -DNO_GUI" \
+    "LDFLAGS=`wxbase-%{wxwin_version}-config --static --libs`"
+popd
+
+# and use it to generate documentation:
+mkdir -p html
+src/tex2rtf docs/tex2rtf.tex html/tex2rtf.html -html
+ln -sf tex2rtf_contents.html html/index.html
+cp -f docs/*.gif html
+cp -f docs/*.txt .
+
+%install
+rm -rf ${RPM_BUILD_ROOT}
+mkdir -p ${RPM_BUILD_ROOT}%{_bindir}
+cp -f src/tex2rtf ${RPM_BUILD_ROOT}%{_bindir}
+
+%clean
+rm -Rf ${RPM_BUILD_ROOT}
+
+%files
+%defattr(-,root,root)
+%doc *.txt html/
+%{_bindir}/*

Added: tex2rtf/distrib/zipdistinno.bat
===================================================================
--- tex2rtf/distrib/zipdistinno.bat	                        (rev 0)
+++ tex2rtf/distrib/zipdistinno.bat	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,123 @@
+@echo off
+rem Zip up a distribution of Tex2RTF using Inno Setup.
+Rem This batch file requires the 4DOS/4NT command processor.
+set src=%WXWIN%\utils\tex2rtf
+set dest=%WXWIN%\deliver
+set inno=1
+set ReleaseDir=Release
+
+if "%src%" == "" goto usage
+if "%dest%" == "" goto usage
+
+if "%1" == "innoonly" set inno=1
+if "%1" == "innoonly" goto dounzip
+if "%1" == "inno" set inno=1
+
+echo About to archive Tex2RTF
+echo   From   %src%
+echo   To     %dest%
+echo CTRL-C if this is not correct.
+pause
+
+erase /E %dest%\tex2rtf.zip
+erase /E %dest%\tex2rtf_setup.exe
+erase /E %dest\tex2rtf_src.zip
+
+if direxist %dest%\tex2rtf erase /sxzy %dest%\tex2rtf\
+
+Rem *** First, determine version from symbols.h
+call ming2952
+echo `#include <stdio.h>` > tex2rtfver.c
+echo `#include "symbols.h"` >> tex2rtfver.c
+echo `int main() { printf("%.2f", TEX2RTF_VERSION_NUMBER); }` >> tex2rtfver.c
+gcc tex2rtfver.c -I%src%\src -o tex2rtfver.exe
+tex2rtfver.exe > tex2rtfversion.txt
+set ver=%@LINE[tex2rtfversion.txt,0]
+echo %ver%
+erase tex2rtfver.exe tex2rtfver.c
+set ver_filename=%ver%
+
+echo Updating docs...
+call msvc6
+
+pushd %src%\docs
+erase /Y tex2rtf_contents.html
+nmake -f makefile.vc htmlhelp htb
+popd
+
+cd %src%
+echo Zipping source...
+
+zip32 -@ %src%\tex2rtf_src.zip < %src%\distrib\src.rsp
+
+echo Adding files...
+
+copy %src%\src\%ReleaseDir%\tex2rtf.exe %src%
+copy %src%\docs\licence.txt %src%
+copy %src%\docs\lgpl.txt %src%
+copy %src%\docs\gpl.txt %src%
+copy %src%\docs\readme.txt %src%
+copy %src%\docs\tex2rtf.chm %src%
+copy %src%\distrib\tex2rtf.exe.manifest %src%
+copy %src%\tools\lacheck.exe %src%
+copy %src%\tools\lacheck.txt %src%
+Rem goto end
+
+upx %src%\tex2rtf.exe
+
+zip -@ %dest%\tex2rtf.zip < %src%\distrib\distrib.rsp
+zip -j -u %dest%\tex2rtf.zip %src%\tex2rtf.exe
+
+:dounzip
+
+cd %dest%
+
+mkdir tex2rtf
+cd tex2rtf
+unzip32 -o ..\tex2rtf.zip
+
+cd %dest%
+
+echo inno = %inno%
+
+Rem Skip Inno Setup setup if inno is 0.
+if "%inno%" == "0" goto end
+
+set tex2rtfver=%ver%
+
+echo ver is %ver%
+echo tex2rtfver is %tex2rtfver%
+
+echo Calling 'makeinno' to generate tex2rtf.iss...
+cd %dest%\tex2rtf
+call %src%\distrib\makeinno.bat
+
+sed -e "s/TEX2RTFVERSION/%tex2rtfver%/g" %src%\distrib\tex2rtf.iss > %TEMP%\tex2rtf.iss
+
+move %TEMP%\tex2rtf.iss %src%\distrib\tex2rtf.iss
+
+rem Now invoke Inno Setup install on the new tex2rtf.iss
+set innocmd="C:\Program Files\Inno Setup 2\compil32.exe" /cc %src%\distrib\tex2rtf.iss
+echo Invoking %innocmd%...
+cd %dest%
+start "Inno Setup" /w %innocmd%
+
+Rem Rename to give it a version
+move setup.exe tex2rtf_%ver_filename%_setup.exe
+
+Rem Copy the source
+move %src%\tex2rtf_src.zip %dest%\tex2rtf-source-%tex2rtfver%.zip
+
+Rem clean up files
+cd %src%
+erase /EFY *.bmp *.htm *.exe *.hlp *.cnt *.txt *.rtf *.doc *.gif *.jpg *.manifest *.chm
+
+cd %dest%
+
+echo Tex2RTF archived.
+goto end
+
+:usage
+echo Tex2RTF distribution.
+
+:end


Property changes on: tex2rtf/distrib/zipdistinno.bat
___________________________________________________________________
Name: svn:executable
   + *

Added: tex2rtf/distrib/zipsrc.bat
===================================================================
--- tex2rtf/distrib/zipsrc.bat	                        (rev 0)
+++ tex2rtf/distrib/zipsrc.bat	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,28 @@
+@echo off
+rem Zip up a source distribution of Tex2RTF and associated apps.
+set src=c:\wx2dev\wxWindows\utils\tex2rtf
+set dest=%src\deliver
+if "%src" == "" goto usage
+if "%dest" == "" goto usage
+echo About to archive Tex2RTF
+echo   From   %src
+echo   To     %dest
+echo CTRL-C if this is not correct.
+pause
+
+erase %dest\tex2rtf_src.zip
+
+cd %src
+echo Zipping...
+
+zip32 -@ %dest\tex2rtf_src.zip < %src\tex2rtf\distrib\src.rsp
+
+cd %dest
+
+echo Tex2RTF source archived.
+goto end
+
+:usage
+echo Tex2RTF source distribution.
+
+:end


Property changes on: tex2rtf/distrib/zipsrc.bat
___________________________________________________________________
Name: svn:executable
   + *

Added: tex2rtf/distrib/zipsrc.sh
===================================================================
--- tex2rtf/distrib/zipsrc.sh	                        (rev 0)
+++ tex2rtf/distrib/zipsrc.sh	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,29 @@
+#!/bin/sh
+# Zip up Tex2RTF source
+
+VERSION=-$1
+if [ "$VERSION" = "-" ] ; then
+  VERSION=""
+fi
+
+TEX2RTFDIR=`pwd`/..
+
+rm -f $TEX2RTFDIR/deliver/tex2rtf$VERSION-source.zip
+rm -f $TEX2RTFDIR/deliver/tex2rtf$VERSION-source.tar.gz
+
+mkdir $TEX2RTFDIR/tex2rtf$VERSION-source
+
+cd $TEX2RTFDIR
+tar -c `cat $TEX2RTFDIR/distrib/src.rsp` | (cd tex2rtf$VERSION-source ; tar -x)
+
+# Make a zip archive
+zip -9 -r $TEX2RTFDIR/deliver/tex2rtf$VERSION-source.zip tex2rtf$VERSION-source
+
+# Now make a tar archive
+tar cf $TEX2RTFDIR/deliver/tex2rtf$VERSION-source.tar tex2rtf$VERSION-source
+gzip -9 $TEX2RTFDIR/deliver/tex2rtf$VERSION-source.tar
+tar cf $TEX2RTFDIR/deliver/tex2rtf$VERSION-source.tar tex2rtf$VERSION-source
+bzip2 -9 $TEX2RTFDIR/deliver/tex2rtf$VERSION-source.tar
+
+
+rm -rf $TEX2RTFDIR/tex2rtf$VERSION-source


Property changes on: tex2rtf/distrib/zipsrc.sh
___________________________________________________________________
Name: svn:executable
   + *
Name: svn:eol-style
   + native

Added: tex2rtf/docs/Makefile
===================================================================
--- tex2rtf/docs/Makefile	                        (rev 0)
+++ tex2rtf/docs/Makefile	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,36 @@
+#
+# File:		Makefile
+# Author:	Julian Smart
+# Created:	1999
+#
+# Makefile : Builds Tex2RTF manual
+#
+
+DOCDIR=..
+LOCALDOCDIR=.
+
+DOCSOURCES=tex2rtf.tex
+
+all: tex2rtf.htb
+
+hlp: tex2rtf.hlp
+htb: tex2rtf.htb
+html: tex2rtf.html
+htmlhelp: tex2rtf.chm
+pdfrtf: tex2rtf_rtf.rtf
+
+tex2rtf_rtf.rtf: $(DOCSOURCES) tex2rtf.ini
+	tex2rtf tex2rtf.tex tex2rtf_rtf.rtf -twice -rtf
+
+tex2rtf.rtf: $(DOCSOURCES) tex2rtf.ini
+	tex2rtf tex2rtf.tex tex2rtf.rtf -twice -winhelp
+
+tex2rtf_contents.html:         $(DOCSOURCES) tex2rtf.ini
+	tex2rtf tex2rtf.tex tex2rtf.html -twice -html
+	rm -f *.con
+	rm -f *.ref
+	rm -f *.con
+	rm -f *.ref
+
+tex2rtf.htb:         tex2rtf_contents.html
+	zip tex2rtf.htb tex2rtf*.html *.hhp *.hhk *.hhc *.gif


Property changes on: tex2rtf/docs/Makefile
___________________________________________________________________
Name: svn:eol-style
   + native

Added: tex2rtf/docs/back.gif
===================================================================
(Binary files differ)


Property changes on: tex2rtf/docs/back.gif
___________________________________________________________________
Name: svn:mime-type
   + application/octet-stream

Added: tex2rtf/docs/bullet.bmp
===================================================================
(Binary files differ)


Property changes on: tex2rtf/docs/bullet.bmp
___________________________________________________________________
Name: svn:mime-type
   + application/octet-stream

Added: tex2rtf/docs/contents.gif
===================================================================
(Binary files differ)


Property changes on: tex2rtf/docs/contents.gif
___________________________________________________________________
Name: svn:mime-type
   + application/octet-stream

Added: tex2rtf/docs/fancyhea.sty
===================================================================
--- tex2rtf/docs/fancyhea.sty	                        (rev 0)
+++ tex2rtf/docs/fancyhea.sty	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,145 @@
+% fancyheadings.sty version 1.92
+% Fancy headers and footers.
+% Piet van Oostrum, Dept of Computer Science, University of Utrecht
+% Padualaan 14, P.O. Box 80.089, 3508 TB Utrecht, The Netherlands
+% Telephone: +31-30-531806. pi...@cs... (mcvax!sun4nl!ruuinf!piet)
+% Sep 16, 1994
+% version 1.4: Correction for use with \reversemargin
+% Sep 29, 1994:
+% version 1.5: Added the \iftopfloat, \ifbotfloat and \iffloatpage commands
+% Oct 4, 1994:
+% version 1.6: Reset single spacing in headers/footers for use with
+% setspace.sty or doublespace.sty
+% Oct 4, 1994:
+% version 1.7: changed \let\@mkboth\markboth to
+% \def\@mkboth{\protect\markboth} to make it more robust
+% Dec 5, 1994:
+% version 1.8: corrections for amsbook/amsart: define \@chapapp and (more
+% importantly) use the \chapter/sectionmark definitions from ps@headings if
+% they exist (which should be true for all standard classes).
+% May 31, 1995:
+% version 1.9: The proposed \renewcommand{\headrulewidth}{\iffloatpage...
+% construction in the doc did not work properly with the fancyplain style. 
+% June 1, 1995:
+% version 1.91: The definition of \@mkboth wasn't restored on subsequent
+% \pagestyle{fancy}'s.
+% June 1, 1995:
+% version 1.92: The sequence \pagestyle{fancyplain} \pagestyle{plain}
+% \pagestyle{fancy} would erroneously select the plain version.
+
+\def\lhead{\@ifnextchar[{\@xlhead}{\@ylhead}}
+\def\@xlhead[#1]#2{\gdef\@elhead{#1}\gdef\@olhead{#2}}
+\def\@ylhead#1{\gdef\@elhead{#1}\gdef\@olhead{#1}}
+
+\def\chead{\@ifnextchar[{\@xchead}{\@ychead}}
+\def\@xchead[#1]#2{\gdef\@echead{#1}\gdef\@ochead{#2}}
+\def\@ychead#1{\gdef\@echead{#1}\gdef\@ochead{#1}}
+
+\def\rhead{\@ifnextchar[{\@xrhead}{\@yrhead}}
+\def\@xrhead[#1]#2{\gdef\@erhead{#1}\gdef\@orhead{#2}}
+\def\@yrhead#1{\gdef\@erhead{#1}\gdef\@orhead{#1}}
+
+\def\lfoot{\@ifnextchar[{\@xlfoot}{\@ylfoot}}
+\def\@xlfoot[#1]#2{\gdef\@elfoot{#1}\gdef\@olfoot{#2}}
+\def\@ylfoot#1{\gdef\@elfoot{#1}\gdef\@olfoot{#1}}
+
+\def\cfoot{\@ifnextchar[{\@xcfoot}{\@ycfoot}}
+\def\@xcfoot[#1]#2{\gdef\@ecfoot{#1}\gdef\@ocfoot{#2}}
+\def\@ycfoot#1{\gdef\@ecfoot{#1}\gdef\@ocfoot{#1}}
+
+\def\rfoot{\@ifnextchar[{\@xrfoot}{\@yrfoot}}
+\def\@xrfoot[#1]#2{\gdef\@erfoot{#1}\gdef\@orfoot{#2}}
+\def\@yrfoot#1{\gdef\@erfoot{#1}\gdef\@orfoot{#1}}
+
+\newdimen\headrulewidth
+\newdimen\footrulewidth
+\newdimen\plainheadrulewidth
+\newdimen\plainfootrulewidth
+\newdimen\headwidth
+\newif\if@fancyplain
+\def\fancyplain#1#2{\if@fancyplain#1\else#2\fi}
+
+% Command to reset various things in the headers:
+% a.o.  single spacing (taken from setspace.sty)
+% and the catcode of ^^M (so that epsf files in the header work if a
+% verbatim crosses a page boundary)
+\def\fancy@reset{\restorecr
+ \def\baselinestretch{1}%
+ \ifx\undefined\@newbaseline% NFSS not present; 2.09 or 2e
+  \ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
+ \else% NFSS (2.09) present
+  \@newbaseline%
+ \fi}
+
+% Initialization of the head and foot text.
+
+\headrulewidth 0.4pt
+\footrulewidth\z@
+\plainheadrulewidth\z@
+\plainfootrulewidth\z@
+
+\lhead[\fancyplain{}{\sl\rightmark}]{\fancyplain{}{\sl\leftmark}}
+%  i.e. empty on ``plain'' pages, \rightmark on even, \leftmark on odd pages
+\chead{}
+\rhead[\fancyplain{}{\sl\leftmark}]{\fancyplain{}{\sl\rightmark}}
+%  i.e. empty on ``plain'' pages, \leftmark on even, \rightmark on odd pages
+\lfoot{}
+\cfoot{\rm\thepage} % page number
+\rfoot{}
+
+% Put together a header or footer given the left, center and
+% right text, fillers at left and right and a rule.
+% The \lap commands put the text into an hbox of zero size,
+% so overlapping text does not generate an errormessage.
+
+\def\@fancyhead#1#2#3#4#5{#1\hbox to\headwidth{\fancy@reset\vbox{\hbox
+{\rlap{\parbox[b]{\headwidth}{\raggedright#2\strut}}\hfill
+\parbox[b]{\headwidth}{\centering#3\strut}\hfill
+\llap{\parbox[b]{\headwidth}{\raggedleft#4\strut}}}\headrule}}#5}
+
+
+\def\@fancyfoot#1#2#3#4#5{#1\hbox to\headwidth{\fancy@reset\vbox{\footrule
+\hbox{\rlap{\parbox[t]{\headwidth}{\raggedright#2\strut}}\hfill
+\parbox[t]{\headwidth}{\centering#3\strut}\hfill
+\llap{\parbox[t]{\headwidth}{\raggedleft#4\strut}}}}}#5}
+
+\def\headrule{{\if@fancyplain\let\headrulewidth\plainheadrulewidth\fi
+\hrule\@height\headrulewidth\@width\headwidth \vskip-\headrulewidth}}
+
+\def\footrule{{\if@fancyplain\let\footrulewidth\plainfootrulewidth\fi
+\vskip-0.3\normalbaselineskip\vskip-\footrulewidth
+\hrule\@width\headwidth\@height\footrulewidth\vskip0.3\normalbaselineskip}}
+
+\def\ps@fancy{%
+\@ifundefined{@chapapp}{\let\@chapapp\chaptername}{}%for amsbook
+\@ifundefined{chapter}{\def\sectionmark##1{\markboth
+{\uppercase{\ifnum \c@secnumdepth>\z@
+ \thesection\hskip 1em\relax \fi ##1}}{}}%
+\def\subsectionmark##1{\markright {\ifnum \c@secnumdepth >\@ne
+ \thesubsection\hskip 1em\relax \fi ##1}}}%
+{\def\chaptermark##1{\markboth {\uppercase{\ifnum \c@secnumdepth>\m@ne
+ \@chapapp\ \thechapter. \ \fi ##1}}{}}
+\def\sectionmark##1{\markright{\uppercase{\ifnum \c@secnumdepth >\z@
+ \thesection. \ \fi ##1}}}}%
+\csname ps@headings\endcsname % use \ps@headings defaults if they exist
+\ps@@fancy
+\gdef\ps@fancy{\@fancyplainfalse\ps@@fancy}%
+\headwidth\textwidth}
+\def\ps@fancyplain{\ps@fancy \let\ps@plain\ps@plain@fancy}
+\def\ps@plain@fancy{\@fancyplaintrue\ps@@fancy}
+\def\ps@@fancy{%
+\def\@mkboth{\protect\markboth}%
+\def\@oddhead{\@fancyhead\@lodd\@olhead\@ochead\@orhead\@rodd}%
+\def\@oddfoot{\@fancyfoot\@lodd\@olfoot\@ocfoot\@orfoot\@rodd}%
+\def\@evenhead{\@fancyhead\@rodd\@elhead\@echead\@erhead\@lodd}%
+\def\@evenfoot{\@fancyfoot\@rodd\@elfoot\@ecfoot\@erfoot\@lodd}%
+}
+\def\@lodd{\if@reversemargin\hss\else\relax\fi}
+\def\@rodd{\if@reversemargin\relax\else\hss\fi}
+
+\let\latex@makecol\@makecol
+\def\@makecol{\let\topfloat\@toplist\let\botfloat\@botlist\latex@makecol}
+\def\iftopfloat#1#2{\ifx\topfloat\empty #2\else #1\fi}
+\def\ifbotfloat#1#2{\ifx\botfloat\empty #2\else #1\fi}
+\def\iffloatpage#1#2{\if@fcolmade #1\else #2\fi}
+

Added: tex2rtf/docs/forward.gif
===================================================================
(Binary files differ)


Property changes on: tex2rtf/docs/forward.gif
___________________________________________________________________
Name: svn:mime-type
   + application/octet-stream

Added: tex2rtf/docs/gpl.txt
===================================================================
--- tex2rtf/docs/gpl.txt	                        (rev 0)
+++ tex2rtf/docs/gpl.txt	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                          675 Mass Ave, Cambridge, MA 02139, USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	Appendix: How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) 19yy  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.


Property changes on: tex2rtf/docs/gpl.txt
___________________________________________________________________
Name: svn:eol-style
   + native

Added: tex2rtf/docs/install.txt
===================================================================
--- tex2rtf/docs/install.txt	                        (rev 0)
+++ tex2rtf/docs/install.txt	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,43 @@
+Installation Instructions for Tex2RTF
+-------------------------------------
+
+Binaries are supplied for Windows 3.1 and for Sun workstations.
+
+If these don't work for you, or you are using a different system, you
+will need to compile Tex2RTF. There are several options for doing this.
+
+(1) GUI version
+
+If you want to have a graphical interface for Tex2RTF
+(not essential for a conversion utility!) then you
+will need to download wxWidgets from skye.aiai.ed.ac.uk
+(192.41.104.6) in the directory /pub/wxwin/beta, files
+wx150?_*.tar.Z (or .gz) where ? is the latest beta letter,
+currently i.
+
+On UNIX, you will then need to decide whether you want to produce
+an XView or Motif version (provided you have one of these
+toolkits), and change the makefiles in accordingly,
+in wx/src/x, wx/src/base and wx/utils/tex2rtf/src.
+
+Use the makefile target 'xview' or 'motif' from each of the directories
+wx/src/x and wx/utils/tex2rtf/src.
+
+Under Windows, just type 'nmake -f makefile.vc' if you're
+using a Microsoft-compatible compiler (you'll need to
+change the makefiles or build project files for other compilers.)
+
+(2) Non-GUI version
+
+Under UNIX, simply use the target 'nogui'. The supplied files in the
+src/wxwin directory supply the essential utilities from wxWidgets, and
+Tex2RTF will be built as a command-line program.
+
+On a PC, add 'NOGUI=1' to the makefile command line. Note that the small
+amount of memory available under DOS can cause catastrophic crashes for
+large input files, due to the lack of memory checking, so be warned! The
+Windows version is a more sensible choice.
+
+-------------------------------------------------------------------------
+Julian Smart, February 1993
+J....@ed...


Property changes on: tex2rtf/docs/install.txt
___________________________________________________________________
Name: svn:eol-style
   + native

Added: tex2rtf/docs/lgpl.txt
===================================================================
--- tex2rtf/docs/lgpl.txt	                        (rev 0)
+++ tex2rtf/docs/lgpl.txt	2008-05-12 06:50:53 UTC (rev 515)
@@ -0,0 +1,517 @@
+
+	  GNU LIBRARY GENERAL PUBLIC LICENSE
+	  ==================================
+                Version 2, June 1991
+
+ Copyright (C) 1991 Free Software Foundation, Inc.
+                    675 Mass Ave, Cambridge, MA 02139, USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the library GPL.  It is
+ numbered 2 because it goes with version 2 of the ordinary GPL.]
+
+                        Preamble
+
+The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General
+Public Licenses are intended to guarantee your freedom to share
+and change free software--to make sure the software is free for
+all its users.
+
+This license, the Library General Public License, applies to
+some specially designated Free Software Foundation software, and
+to any other libraries whose authors decide to use it.  You can
+use it for your libraries, too.
+
+When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure
+that you have the freedom to distribute copies of free software
+(and charge for this service if you wish), that you receive
+source code or can get it if you want it, that you can change
+the software or use pieces of it in new free programs; and that
+you know you can do these things.
+
+To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the
+rights. These restrictions translate to certain responsibilities
+for you if you distribute copies of the library, or if you
+modify it.
+
+For example, if you distribute copies of the library, whether
+gratis or for a fee, you must give the recipients all the rights
+that we gave you.  You must make sure that they, too, receive or
+can get the source code.  If you link a program with the
+library, you must provide complete object files to the
+recipients so that they can relink them with the library, after
+making changes to the library and recompiling it.  And you must
+show them these terms so they know their rights.
+
+Our method of protecting your rights has two steps: (1)
+copyright the library, and (2) offer you this license which
+gives you legal permission to copy, distribute and/or modify the
+library.
+
+Also, for each distributor's protection, we want to make certain
+that everyone understands that there is no warranty for this
+free library.  If the library is modified by someone else and
+passed on, we want its recipients to know that what they have is
+not the original version, so that any problems introduced by
+others will not reflect on the original authors' reputations.
+ 
+Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that companies
+distributing free software will individually obtain patent
+licenses, thus in effect transforming the program into
+proprietary software.  To prevent this, we have made it clear
+that any patent must be licensed for everyone's free use or not
+licensed at all.
+
+Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License, which was designed for
+utility programs.  This license, the GNU Library General Public
+License, applies to certain designated libraries.  This license
+is quite different from the ordinary one; be sure to read it in
+full, and don't assume that anything in it is the same as in the
+ordinary license.
+
+The reason we have a separate public license for some libraries
+is that they blur the distinction we usually make between
+modifying or adding to a program and simply using it.  Linking a
+program with a library, without changing the library, is in some
+sense simply using the library, and is analogous to running a
+utility program or application program.  However, in a textual
+and legal sense, the linked executable is a combined work, a
+derivative of the original library, and the ordinary General
+Public License treats it as such.
+
+Because of this blurred distinction, using the ordinary General
+Public License for libraries did not effectively promote
+software sharing, because most developers did not use the
+libraries.  We concluded that weaker conditions might promote
+sharing better.
+
+However, unrestricted linking of non-free programs would deprive
+the users of those programs of all benefit from the free status
+of the libraries themselves.  This Library General Public
+License is intended to permit developers of non-free programs to
+use free libraries, while preserving your freedom as a user of
+such programs to change the free libraries that are incorporated
+in them.  (We have not seen how to achieve this as regards
+changes in header files, but we have achieved it as regards
+changes in the actual functions of the Library.)  The hope is
+that this will lead to faster development of free libraries.
+
+The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference
+between a "work based on the library" and a "work that uses the
+library".  The former contains code derived from the library,
+while the latter only works together with the library.
+
+Note that it is possible for a library to be covered by the
+ordinary General Public License rather than by this special one.
+
+                GNU LIBRARY GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+0. This License Agreement applies to any software library which
+contains a notice placed by the copyright holder or other
+authorized party saying it may be distributed under the terms of
+this Library General Public License (also called "this
+License").  Each licensee is addressed as "you".
+
+A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application
+programs (which use some of those functions and data) to form
+executables.
+
+The "Library", below, refers to any such software library or
+work which has been distributed under these terms.  A "work
+based on the Library" means either the Library or any derivative
+work under copyright law: that is to say, a work containing the
+Library or a portion of it, either verbatim or with
+modifications and/or translated straightforwardly into another
+language.  (Hereinafter, translation is included without
+limitation in the term "modification".)
+
+"Source code" for a work means the preferred form of the work
+for making modifications to it.  For a library, complete source
+code means all the source code for all modules it contains, plus
+any associated interface definition ...
 
[truncated message content]