Menu
▾
▴
SF.net SVN: jazzplusplus: [370] trunk/jazz/conf/jazz.cfg
|
From: <pst...@us...> - 2008-03-30 14:48:14
|
Revision: 370
http://jazzplusplus.svn.sourceforge.net/jazzplusplus/?rev=370&view=rev
Author: pstieber
Date: 2008-03-30 07:48:11 -0700 (Sun, 30 Mar 2008)
Log Message:
-----------
1. Set the default ALSA devices to -1 to generate a prompt.
2. Removed the startup song.
Modified Paths:
--------------
trunk/jazz/conf/jazz.cfg
Modified: trunk/jazz/conf/jazz.cfg
===================================================================
--- trunk/jazz/conf/jazz.cfg 2008-03-30 14:45:43 UTC (rev 369)
+++ trunk/jazz/conf/jazz.cfg 2008-03-30 14:48:11 UTC (rev 370)
@@ -1,101 +1,98 @@
-# jazz config-file for General Midi setup
-
-# when displaying this midichannel (1..16) the Drumnames are displayed
-.drumchannel 10
-
-# Controls software emulation of midi thru
-# If using /dev/music with a true mpu401 card
-# set this to 0 to disable software emulated midi thru
-# Has no effect with jazz's native mpu401 driver
-.softthru 1
-
-# controls source of sequencer clock (0 = internal)
-.clocksource 0
-
-# controls sending of real time info to midi out from sequencer when
-# playing, normally off
-.realtime_out 0
-
-# controls use of GS reverb and chorus macros opposed to individual
-# parameter control
-.use_reverb_macro 1
-.use_chorus_macro 1
-
-# sets controller number for selecting bank (with GS it's 0)
-.bank_control_number 0
-
-# controls max. number of columns to use in the "Parts" dialogs
-.parts_columns_max 4
-
-# controls whether to draw tracknames also on right side of "Parts" dialogs
-.parts_tracknames_right 0
-
-# set to 1 will enable audio support on startup, 0 will disable
-.enable_audio 1
-
-# Window positions/sizes
-.trackwin_xpos 10
-.trackwin_ypos 10
-.trackwin_width 600
-.trackwin_height 400
-
-.pianowin_xpos 30
-.pianowin_ypos 30
-.pianowin_width 600
-.pianowin_height 400
-
-.enable_welcome 0
-
-# ---------------- Linux configuration -----------------------------
-
-# which driver to use:
-# 0 = jazz's native /dev/mpu401
-# 1 = OSS /dev/music
-# 2 = ALSA (experimental)
-
-.driver 2
-
-# OSS-Device no, a value of -1 will pop up a dialog at startup
-.device 0
-
-# for alsa, these are the indexes of the clients:ports used
-# for midi thru
-# see /proc/asound/seq/clients for candidates
-.thru_input 0
-.thru_output 0
-
-# if using jazz's native mpu-401 driver this can be used to control
-# hardware midi thru on the interface card
-.hardthru 1
-
-# External sync with ALSA (from Takashi Iwai <ti...@su...>)
-# To activate sync mastering on jazz, one has to set .alsa_sync_output
-# to 2 or 3 in config file, for midi clock or MTC, respectively.
-# Edit /usr/local/jazz/jazz.cfg manually by text editor.
-# Then jazz will ask you the device to sync output. Choose the raw midi
-# device to output the sync signals. This can be different from the
-# midi output device.
-
-# The time format can be selected by ".alsa_sync_output_format" in
-# config file. It corresponds to SMPTE format (from 0 = 24fps to 3 = 30
-# ndp). The format is ignored, of course, on MIDI clock mode.
-
-# ---------------- M$-Windows configuration ------------------------
-
-# device numbers for windows, -1 will prompt at startup
-.win_input_device -1
-.win_output_device -1
-
-#####################################################################
-
-# Synthesizer configuration:
-.synth_config gs.jzi
-.send_synth_reset 0
-.synth_dialog 0
-
-# program generated configuration:
-
-
-.alsa_input_device 1
-.alsa_output_device 2
-.startup_song /home/joakim/music/moogtest.mid
+# jazz config-file for General Midi setup
+
+# when displaying this midichannel (1..16) the Drumnames are displayed
+.drumchannel 10
+
+# Controls software emulation of midi thru
+# If using /dev/music with a true mpu401 card
+# set this to 0 to disable software emulated midi thru
+# Has no effect with jazz's native mpu401 driver
+.softthru 1
+
+# controls source of sequencer clock (0 = internal)
+.clocksource 0
+
+# controls sending of real time info to midi out from sequencer when
+# playing, normally off
+.realtime_out 0
+
+# controls use of GS reverb and chorus macros opposed to individual
+# parameter control
+.use_reverb_macro 1
+.use_chorus_macro 1
+
+# sets controller number for selecting bank (with GS it's 0)
+.bank_control_number 0
+
+# controls max. number of columns to use in the "Parts" dialogs
+.parts_columns_max 4
+
+# controls whether to draw tracknames also on right side of "Parts" dialogs
+.parts_tracknames_right 0
+
+# set to 1 will enable audio support on startup, 0 will disable
+.enable_audio 1
+
+# Window positions/sizes
+.trackwin_xpos 10
+.trackwin_ypos 10
+.trackwin_width 600
+.trackwin_height 400
+
+.pianowin_xpos 30
+.pianowin_ypos 30
+.pianowin_width 600
+.pianowin_height 400
+
+.enable_welcome 0
+
+# ---------------- Linux configuration -----------------------------
+
+# which driver to use:
+# 0 = jazz's native /dev/mpu401
+# 1 = OSS /dev/music
+# 2 = ALSA (experimental)
+
+.driver 2
+
+# OSS-Device no, a value of -1 will pop up a dialog at startup
+.device 0
+
+# for alsa, these are the indexes of the clients:ports used
+# for midi thru
+# see /proc/asound/seq/clients for candidates
+.thru_input 0
+.thru_output 0
+
+# if using jazz's native mpu-401 driver this can be used to control
+# hardware midi thru on the interface card
+.hardthru 1
+
+# External sync with ALSA (from Takashi Iwai <ti...@su...>)
+# To activate sync mastering on jazz, one has to set .alsa_sync_output
+# to 2 or 3 in config file, for midi clock or MTC, respectively.
+# Edit /usr/local/jazz/jazz.cfg manually by text editor.
+# Then jazz will ask you the device to sync output. Choose the raw midi
+# device to output the sync signals. This can be different from the
+# midi output device.
+
+# The time format can be selected by ".alsa_sync_output_format" in
+# config file. It corresponds to SMPTE format (from 0 = 24fps to 3 = 30
+# ndp). The format is ignored, of course, on MIDI clock mode.
+
+# ---------------- M$-Windows configuration ------------------------
+
+# device numbers for windows, -1 will prompt at startup
+.win_input_device -1
+.win_output_device -1
+
+#####################################################################
+
+# Synthesizer configuration:
+.synth_config gs.jzi
+.send_synth_reset 0
+.synth_dialog 0
+
+# program generated configuration:
+.alsa_input_device -1
+.alsa_output_device -1
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
