jazzplusplus-devel

Re: [jazzplusplus-devel] Jazz++ 4.1.8 legacy binaries

[Kevin C. <ke...@do...>]

On 23 March 2004 at 23:36, Kevin Cosgrove <ke...@do...> wrote:

> I've got source and binary RPMs to check in.  I've not checked
> anything in via CVS to SourceForge before.  Until just a few
> months ago I've been sitting behind a corporate firewall that
> doesn't let CVS or SSH pass.  I'll read the instructions on SF
> later.  If anyone wants to give me a primer, I'm all eyes.

OK, I've read a bit.  It occurs to me that even after reading I can't 
tell how to upload my stuff and have it appear in the released files 
section of our SF page.  Anyone know?

Thx.....

Re: [jazzplusplus-devel] Jazz++ 4.1.8 legacy binaries

[Kevin C. <ke...@do...>]

On 23 March 2004 at 23:51, Dave Fancella <dav...@co...> wrote:

> http://sourceforge.net/docman/display_doc.php?docid=6445&group_id=1
> 
> Looks like you have to be a project admin to do it.  If you
> want to just stick it in the webspace for now until Patrick
> shows up to either upload the rpms or grant you project admin
> status so you can do it, that should be fine.  We can still
> link to them. :)

I don't have a problem being an admin; I know how to keep my hands
off of stuff.  ;-)   I also don't have a problem not being an admin.
But, I do think the project should have a backup admin to cover
for vacations, illness, or other reasons that Patrick might want
to have a break from jazz.

Cheers....

Re: [jazzplusplus-devel] Jazz++ 4.1.8 legacy binaries

[Kevin C. <ke...@do...>]

On 24 March 2004 at 3:55, Patrick Earl <pa...@pa...> wrote:

> I've turned on your permissions to be a "Release Tech."  I suspect 
> that you release things by going to the jazz page and clicking on 
> some links.  I haven't actually tried it though, so it's just a 
> guess.

Great, something between "developer" and "admin".  Cool & thanks...

Re: [jazzplusplus-devel] Jazz++ 4.1.8 legacy binaries

[Kevin C. <ke...@do...>]

On 24 March 2004 at 4:28, Patrick Earl <pa...@pa...> wrote:
 
> I made all the sourceforge people project admins.  Perhaps backwards 
> thinking, but I trust you all and you might as well be able to do 
> things yourselves. :)

OK, I'll be careful.   Thanks....

Re: [jazzplusplus-devel] Jazz++ 4.1.8 legacy binaries

[Dave F. <dav...@co...>]

On Wednesday 24 March 2004 07:46 am, Kevin Cosgrove wrote:
> On 23 March 2004 at 23:36, Kevin Cosgrove <ke...@do...> wrote:
> > I've got source and binary RPMs to check in.  I've not checked
> > anything in via CVS to SourceForge before.  Until just a few
> > months ago I've been sitting behind a corporate firewall that
> > doesn't let CVS or SSH pass.  I'll read the instructions on SF
> > later.  If anyone wants to give me a primer, I'm all eyes.
>
> OK, I've read a bit.  It occurs to me that even after reading I can't
> tell how to upload my stuff and have it appear in the released files
> section of our SF page.  Anyone know?

http://sourceforge.net/docman/display_doc.php?docid=6445&group_id=1

Looks like you have to be a project admin to do it.  If you want to just stick 
it in the webspace for now until Patrick shows up to either upload the rpms 
or grant you project admin status so you can do it, that should be fine.  We 
can still link to them.  :)

Dave

-- 
Visit my website!
http://www.davefancella.com/?event=em

He who steps on others to reach the top has good balance.

Re: [jazzplusplus-devel] Jazz++ 4.1.8 legacy binaries

[Patrick E. <pa...@pa...>]

On Tuesday 23 March 2004 16:51, Dave Fancella wrote:
> Looks like you have to be a project admin to do it.  If you want to
> just stick it in the webspace for now until Patrick shows up to
> either upload the rpms or grant you project admin status so you can
> do it, that should be fine.  We can still link to them.  :)

I made all the sourceforge people project admins.  Perhaps backwards 
thinking, but I trust you all and you might as well be able to do 
things yourselves. :)

        Patrick

Re: [jazzplusplus-devel] Jazz++ 4.1.8 legacy binaries

[Patrick E. <pa...@pa...>]

I've turned on your permissions to be a "Release Tech."  I suspect 
that you release things by going to the jazz page and clicking on 
some links.  I haven't actually tried it though, so it's just a 
guess.

        Patrick

On Wednesday 24 March 2004 00:46, Kevin Cosgrove wrote:
> On 23 March 2004 at 23:36, Kevin Cosgrove <ke...@do...> wrote:
> > I've got source and binary RPMs to check in.  I've not checked
> > anything in via CVS to SourceForge before.  Until just a few
> > months ago I've been sitting behind a corporate firewall that
> > doesn't let CVS or SSH pass.  I'll read the instructions on SF
> > later.  If anyone wants to give me a primer, I'm all eyes.
>
> OK, I've read a bit.  It occurs to me that even after reading I
> can't tell how to upload my stuff and have it appear in the
> released files section of our SF page.  Anyone know?
>
> Thx.....
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO
> of GenToo technologies. Learn everything from fundamentals to
> system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=cli
>ck _______________________________________________
> jazzplusplus-devel mailing list
> jaz...@li...
> https://lists.sourceforge.net/lists/listinfo/jazzplusplus-devel