#14 ivtv wont load
What am I doing wrong? Heres a log snippet:
ivtv: ==================== START INIT IVTV
ivtv: version 0.4.2 (tagged release) loading
ivtv: Linux version: 2.6.14-1.1656_FC4 686 REGPARM
4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug
info between
ivtv: the START INIT IVTV and END INIT IVTV lines,
along with
ivtv: any module options, when mailing the ivtv-users
mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] ->
GSI 5 (level, low) -> IRQ 5
ivtv0: Unreasonably low latency timer, setting to 64
(was 32)
ivtv0: Failed to load module tveeprom
ivtv0 warning: i2c client addr: 0x50 not found for
command 0x0!
ivtv0: Error -19 reading Hauppauge eeprom.
ivtv0: Possible causes: the tveeprom module was not
loaded, or
ivtv0: the eeprom kernel module was loaded before the
tveeprom module.
ivtv0: Failed to load module tuner
cx25840 2-0044: ivtv driver
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c
driver #0)
cx25840 2-0044: unable to open firmware v4l-cx25840.fw
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 2-001b: ivtv driver
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
ivtv0: Could not detect tuner standard, defaulting to NTSC.
ivtv0: unable to open firmware v4l-cx2341x-enc.fw
ivtv0: did you put the firmware in the hotplug firmware
directory?
ivtv0 warning: failed loading encoder firmware
ivtv0 warning: Error loading firmware -3!
ivtv0: Error -3 initializing firmware.
ivtv0: Error -12 on initialization
ivtv: probe of 0000:01:07.0 failed with error -12
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK1] ->
GSI 9 (level, low) -> IRQ 9
ivtv0: Unreasonably low latency timer, setting to 64
(was 32)
cx25840 2-0044: ivtv driver
cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c
driver #0)
cx25840 2-0044: unable to open firmware v4l-cx25840.fw
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 2-001b: ivtv driver
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
ivtv0: Failed to load module tveeprom
ivtv0 warning: i2c client addr: 0x50 not found for
command 0x0!
ivtv0: Error -19 reading Hauppauge eeprom.
ivtv0: Possible causes: the tveeprom module was not
loaded, or
ivtv0: the eeprom kernel module was loaded before the
tveeprom module.
ivtv0: Failed to load module tuner
ivtv0: unable to open firmware v4l-cx2341x-enc.fw
ivtv0: did you put the firmware in the hotplug firmware
directory?
ivtv0 warning: failed loading encoder firmware
ivtv0 warning: Error loading firmware -3!
ivtv0: Error -3 initializing firmware.
ivtv0: Error -12 on initialization
ivtv: probe of 0000:01:08.0 failed with error -12
ivtv: ==================== END INIT IVTV
====================
