From: Nick R. <nic...@gm...> - 2005-05-24 20:01:21
|
On 5/24/05, Tyler Trafford <ttr...@gm...> wrote: > Nick Rosier wrote: >=20 > > I just upgraded from 0.3.4s to 0.3.5f and lost tuner audio on my > > 150MCE (PAL, tuner 58); I went back to all versions since 0.3.4s and > > backtraced it to 0.3.4w. I can get audio but with bad quality > > (ticking, cracking) by doing: > > > > ivtvctl -q 1 (setting it to line 1). >=20 > Could you try 0.3.5f with the fixup.diff.gz I recently posted. Doesn't seem to fix it. I switched some channels in MythTV-LiveTV and was able to get audio on 1 out of 5 tested channels but then on a channel switch the driver hung, but that could be another problem (never had that happening before though): ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes to= tal ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x00000140 cx25840: decoder disable output cx25840: decoder enable output ivtv: Decoder VBI RE-Insert start 0x0019ac00 size 0x0000be00 type 0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder disable output cx25840: decoder enable output ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes to= tal ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x00000140 cx25840: decoder disable output cx25840: decoder enable output ivtv: Decoder VBI RE-Insert start 0x0019ac00 size 0x0000be00 type 0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder disable output cx25840: decoder enable output ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes to= tal ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x00000140 cx25840: decoder disable output cx25840: decoder enable output ivtv: Decoder VBI RE-Insert start 0x0019ac00 size 0x0000be00 type 0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000015 with result 0xfffffff0 ivtv: DEC: couldnt read clock cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder set picture bright=3D127 contrast=3D63 saturation=3D63 hue= =3D0 cx25840: decoder disable output cx25840: decoder enable output ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes to= tal ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1444 ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x00000140 cx25840: decoder disable output cx25840: decoder enable output ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000044 with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x0000004a with result 0xfffffff0 ivtv: 1000 ms time out waiting for firmware ivtv: Failed api call 0x00000045 with result 0xfffffff0 N. |