Re: [Itifg-tech] need help configure shutter

[<M....@go...>]

Hello,

I think, now You should see an valid image (live video), because the
repetiting
output of test_itifg is "-0." instead of "0." before!?

The questions dealing with FOURC and 'busy timers' I can't answer, because
I don't know, what FOURC is. It is NOT my software.

                                          matthias

"Shashidhara.Marathe" <sh...@gi...> wrote on 25.04.2008 12:41:47:

> Dear sir,
>
> Here is the output,
>
> [root@203 itifg-7.2.1]# ./config_pcdig p2b1tn00.exo
> pcdig: Downloaded to board 0.
>
> [root@203 itifg-7.2.1]# ./test_itifg -f ./cameras/dalsa-1m30_pcd.cam
>
> Driver version: 7.2.1-0.
> Compilation Date: Dec 18 2007.
> Boards detected: 1.
> Module type board 0: PCDig.
>
> 0 - conffile: ./cameras/dalsa-1m30_pcd.cam
> 0 - savefile: test_itifg
> 0 - save: FALSE
> 0 - display: TRUE
> 0 - wait: FALSE
> 0 - useshm: TRUE
> 0 - match: FALSE
> 0 - lock: FALSE
> 0 - board: 0
> 0 - module: 32
> 0 - camera: 0
> 0 - depth: 0
> 0 - scales: 64
> 0 - buffer: 1
> 0 - frames: 2147483647
> 0 - zoom: 1
> 0 - rate: 1.00
> 0 - opmode: read
> 0 - syncmd: block
> 0 - sacqmd: no special
> Camera_Name: "Dalstar 1M30 fps:30 (12bit)"
> Exo_Filename: "p2b1tn00.exo"
> CAM_MODE_CTL: Camera Mode Control= 0
> EXT_SYNC_PERIOD_TIME: Camera Exposure Time= 40000.000000
> PRI_MIDPOINT_DELAY: Camera Readout Time= 120000.000000
> EXSYNC_MIDPOINT_DELAY: Camera Readout Time= 120000.000000
> HORZ_OFF: Horizontal Offset= 10
> WIDTH_PIXELS: Image Width= 1024
> VERT_OFF: Vertical Offset= 0
> HEIGHT_PIXELS: Image Height= 1024
> CCLK_FREQ_SEL: Camera Clock Frequency Select= 40.000000
> PIXEL_SIZE: Pixel Size= 12
> TRIG_DIVIDE_FACTOR: Trigger Divider Factor= 0
> CameraName : Dalstar 1M30 fps:30 (12bit).
> ExoFilename: p2b1tn00.exo.
>
> Image size: 2097152.
> Image width: 1024.
> Image height: 1024.
> Image depth: 12.
> Source bits_per_pixel: 12.
> Source bytes_per_line: 2048.
> Source pointer: 0x40280000.
> Source offset: 0.
> Destination bits_per_pixel: 32.
> Destination bytes_per_line: 4096.
> Destination pointer: 0x40481000.
> Destination offset: 0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.
> -0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.-0.Broken pipe
>
> When i quit the fourc terminal, i get the following error message.
>
> 1272.FOURC> quit
>
> Admin's state is stored for /dev/ttyp#.
> Stopping busy timers ...
> [admin@203 temp]$
>
> What is this "busy timers" refers to?
>
> This started apearing now, after i started configuring, to include
> shutter......(from 2 weeks).
>
> Thanks and regards,
> Shashi
>
> > ....
>
> Mr.Shashidhara Marathe
> Ph.D student
> #311,Dept. of Materials Science and Engg.
> Gwangju Institute of Science and Tech.
> 1-oryong-Dong, Buk-Gu, Gwnagju- 500712
> South Korea
> Cell: 010-4619-0231
> PH : +82-62-970-2352
> FAX: +82-62-970-2304

_________________________________________________
Matthias Stein,
GOM Gesellschaft fuer Optische Messtechnik mbH,
Mittelweg 7-8, 38106 Braunschweig, Germany
E-mail: M....@go..., Internet: http://www.gom.com
Tel.: +49 (0)531 39029-0, Fax: +49 (0)531 39029-15
Amtsgericht Handelsregister Braunschweig, HRB-Nr.: 3131
Geschaeftsfuehrer: Dr.-Ing. K. Galanulis, Dr.-Ing. D. Winter


This e-mail is confidential. If you have received it in error, you are on
notice of its status.
Please notify us immediately by reply e-mail and delete this message from
your system.
Please do not copy it or use it for any purposes, or disclose its contents
to any other person;
to do so could be a breach of confidence.
Thank you for your co-operation.