Re: [Isisalsa-devel] Re: [Re: isis driver]

[Pieter P. <pie...@st...>]

Felipe Sologuren wrote:

> Pieter Palmers wrote:
>
>> Felipe Sologuren wrote:
>>
>>> -------- Original Message --------
>>> Subject: Re: isis driver
>>> Date: Sat, 16 Aug 2003 13:11:32 -0400
>>> From: Felipe Sologuren <sol...@es...>
>>> To: ppalmers <Pie...@es...>
>>> References: <3F3...@es...> 
>>> <3F3...@es...> 
>>> <106...@we...>
>>>
>>> ppalmers wrote:
>>>
>>>>> Cold reboot from windows is still necessary for maxiinit not?
>>>>>
>>>>
>>>>
>>>> windows boot is not nescessary. On my system, everything works 
>>>> without windows boot.
>>>>
>>>>
>>>>
>>> Pieter:
>>>     Yesterday, I could listen audio in XMMS with snd-es1968 (the 
>>> sound was good) but with snd-isis module the error is the same 
>>> ('ALSA sam_io.c:345: sam9407: command 0x3 ack timeout...').
>>> I don't know if it could be an irq problem.
>>> It could be a problem with my chipset VIA KT333 & VT8235 yet?
>>> The card is in the slot 5 of pci bus and the onboard sound is disabled.
>>> In bios, for settings, this slot have the same irq (5) with slot 2 
>>> (empty).
>>> I have RH7.3 again with kernel 2.4.18-3 and gcc 2.96.
>>> I think that in RH9 (not upgraded and in other partition) with 
>>> kernel 2.4.20-8 and gcc 3.2 the result will be the same, I'll do the 
>>> test tomorrow.
>>>
>>> In Via website exist a patch for ide timings. For 'time.h' of kernel 
>>> sources. It could help?
>>>
>>> Thank you one more time,
>>> Felipe
>>
>>
>>
>>
>> Could you send me the output of the maxiinit script?
>
>
>     I was probing several times...
>     After login:
>     - alsasound status: drivers loaded. But snd-isis isn't loaded.
>     - lsmod only shows oss modules (I don't know why (/etc/hwconf?))
> 1) maxinit -> reports maxiinit-RH9-before
> 2) modprobe snd-isis -> fails like ever and sounds ugly.
> 3) maxiinit -> maxiinit-RH9-before
> 4) modprobe snd-es1968 -> good
> 5) maxiinit -> maxiinit-RH9-before
> 6) I can do aplay succesfully (after alsamixer)
> 7) modprobe -r snd-es1968 or alsasound stop -> sounds ugly
> 8) maxiinit -> maxiinit-RH9-after (this error doesn't resolve until 
> step  4 or 9)
> 9) modprobe snd-isis -> fails and sounds ugly -> dmesg-RH9-after
> 10) I could do 3) again (in a loop)
>
> Only when snd-es1968 is loaded cat /proc/interrupts shows 5:Maestro...
>
> In RH7.3 the responses are the same except that in dmesg-RH9 exist a 
> line with 'snd-malloc...' and lsmod in RH7.3 after step 7) with a 
> module snd-page-alloc-... (I suppose it means the same not?)
>
> Today, after several hours (more than 20) of my pc connected to 
> Internet without me, I could to load snd-isis but I don't know how nor 
> why. Only know that es1968 were loaded all those time.
>      Aplay were locked, and I couldn't do alsasound stop. cat 
> /proc/interrupts shows 5:Isis..., and dmesg several lines with hexas.
>
> I know it could do but I don't know how! :(
>
>> How many errors does it generate?
>
>
> 2 unexpected responses.
> One time I haved maxiinit-RH9-2 but I don't remember the secuency of 
> commands.
>
can you try using the attached firmware?

Pieter