Re: [Isisalsa-devel] Re: [Re: isis driver]

[Felipe S. <sol...@es...>]

Pieter Palmers wrote:
> Felipe Sologuren wrote:
> 
>> -------- Original Message --------
>> Subject: Re: isis driver
>> Date: Sat, 16 Aug 2003 13:11:32 -0400
>> From: Felipe Sologuren <sol...@es...>
>> To: ppalmers <Pie...@es...>
>> References: <3F3...@es...> 
>> <3F3...@es...> 
>> <106...@we...>
>>
>> ppalmers wrote:
>>
>>>> Cold reboot from windows is still necessary for maxiinit not?
>>>>
>>>
>>>
>>> windows boot is not nescessary. On my system, everything works 
>>> without windows boot.
>>>
>>>
>>>
>> Pieter:
>>     Yesterday, I could listen audio in XMMS with snd-es1968 (the sound 
>> was good) but with snd-isis module the error is the same ('ALSA 
>> sam_io.c:345: sam9407: command 0x3 ack timeout...').
>> I don't know if it could be an irq problem.
>> It could be a problem with my chipset VIA KT333 & VT8235 yet?
>> The card is in the slot 5 of pci bus and the onboard sound is disabled.
>> In bios, for settings, this slot have the same irq (5) with slot 2 
>> (empty).
>> I have RH7.3 again with kernel 2.4.18-3 and gcc 2.96.
>> I think that in RH9 (not upgraded and in other partition) with kernel 
>> 2.4.20-8 and gcc 3.2 the result will be the same, I'll do the test 
>> tomorrow.
>>
>> In Via website exist a patch for ide timings. For 'time.h' of kernel 
>> sources. It could help?
>>
>> Thank you one more time,
>> Felipe
> 
> 
> 
> Could you send me the output of the maxiinit script?

	I was probing several times...
	After login:
	- alsasound status: drivers loaded. But snd-isis isn't loaded.
	- lsmod only shows oss modules (I don't know why (/etc/hwconf?))
1) maxinit -> reports maxiinit-RH9-before
2) modprobe snd-isis -> fails like ever and sounds ugly.
3) maxiinit -> maxiinit-RH9-before
4) modprobe snd-es1968 -> good
5) maxiinit -> maxiinit-RH9-before
6) I can do aplay succesfully (after alsamixer)
7) modprobe -r snd-es1968 or alsasound stop -> sounds ugly
8) maxiinit -> maxiinit-RH9-after (this error doesn't resolve until step 
  4 or 9)
9) modprobe snd-isis -> fails and sounds ugly -> dmesg-RH9-after
10) I could do 3) again (in a loop)

Only when snd-es1968 is loaded cat /proc/interrupts shows 5:Maestro...

In RH7.3 the responses are the same except that in dmesg-RH9 exist a 
line with 'snd-malloc...' and lsmod in RH7.3 after step 7) with a module 
snd-page-alloc-... (I suppose it means the same not?)

Today, after several hours (more than 20) of my pc connected to Internet 
without me, I could to load snd-isis but I don't know how nor why. Only 
know that es1968 were loaded all those time.
	 Aplay were locked, and I couldn't do alsasound stop. cat 
/proc/interrupts shows 5:Isis..., and dmesg several lines with hexas.

I know it could do but I don't know how! :(

> How many errors does it generate?

2 unexpected responses.
One time I haved maxiinit-RH9-2 but I don't remember the secuency of 
commands.
> 
> Pieter
> 
> 
Regards,
Felipe
> 
> 
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
> http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> _______________________________________________
> Isisalsa-devel mailing list
> Isi...@li...
> https://lists.sourceforge.net/lists/listinfo/isisalsa-devel
> 
>